| #1 planebldr
||Jan 27, 2012 11:47 AM
LPU WI World Models P51 Hoover Colors with Motor ESC and servos
Up for sale is a World Models P51 Mustang. It is a .46 size that was converted to electric (can be easily made glow again). I am looking to sell it to fund another project. It currently has a Turnigy 50-55 600KV Brushless Motor, a Hobbyking 90-100A ESC, Futaba servos throughout for controls, and a Hitec servo for the retracts. The retracts are mechanicals, and I have had no problems taking off of grass with this plane. The prop I currently have on it is a Master Airscrew Formula One Series 12.5X8.5 and this setup is pretty quick and unlimited vertical on a 6 cell pack. I was using a Rhino 6 cell 4900mAh 20C lipo with great results. I am sure 5 cells would fly this aircraft just fine as well. There is a year old Tenergy 2000mAh 4.8V NimH receiver pack so if motor runs out of power, or ESC fails you still have control. Unfortunately the wing has to be removed to acess the lipo, but it is easy and have had no troubles with it. There was an air exit hole cut in the tail of the aircraft. I can send pics of it if you would like. If you are more of a glow flyer, I will sell without the brushless power system. To convert back all you would need is a fuel tank and motor mounts for your engine. I have the clear cowl trim templates for cutting the painted cowl. This aircraft was suprisingly easy to fly with no bad habbits. If you have any experience with low wings, this won't be a problem. It slows down for landings easily, and VERY stable. Any questions feel free to ask!
With motor and ESC---$150 OBO
Airframe and servos--$110 OBO
Will/Cannot ship. Please don't ask....the tail being together and the size of the wing would be just too much to be worthwhile. Not to mention I do not have access to a box large enough to be sure it arrives intact. Sorry....... Cash on pickup...or Paypal before pickup is fine as well.