RC Groups

RC Groups
    3D Foamies
        Discussion NEW SBACH 342 EPO 1400mm from hobbyking

#1 stalyoni Jan 13, 2012 04:25 AM

NEW SBACH 342 EPO 1400mm from hobbyking
 
http://www.hobbyking.com/hobbyking/s...00mm_PNF_.html

http://www.hobbyking.com/hobbyking/s...lack-20702.jpghttp://www.hobbyking.com/hobbyking/s...black-sub2.jpghttp://www.hobbyking.com/hobbyking/s...black-sub3.jpghttp://www.hobbyking.com/hobbyking/s...black-sub7.jpg

HobbyKing Daily - Sbach 342 (2 min 28 sec)


Looks like it could be allot of fun. This looks like the dynam one but the wingspan on the dynam is 1250? It looks far better then the Mx2 they came out with a while back.

Looks like it has decent servos and huge control surfaces. Lets hope the electronics in it are decent enough. I think thats what was wrong with the Mx2. You had to swap out allot of stuff out of the box.

What do you think guys will these make a decent 3d park flyer?

#2 rmgmag Jan 13, 2012 04:54 AM

It looks pretty, but then again, the MX2 looks pretty too, but flies like a pig. Don't know about the 2 9g servos they list, hard to believe that they'd hold up in a 55" wing, I'm assuming that they're the aileron servos. I'll take a wait and see approach on this one.

#3 Hilde Jan 13, 2012 05:16 AM

Just placed an order.

#4 shelterock Jan 13, 2012 08:16 AM

Waterslid eDecals
 
Great Looking plane, Definitely will be watch this thread. Curious to see what people will say about the waterslide decals. My HK Stinger 64 waterslide decals are flaking off like crazy and Byron's video shows the trailing edge to be a little ragged on the tail surfaces.

Fingers crossed
H

#5 P.I.Engineer Jan 13, 2012 05:46 PM

i'm waiting for the report too. I like the looks of this

#6 stalyoni Jan 16, 2012 01:26 AM

Quote:

Originally Posted by Hilde (Post 20409419)
Just placed an order.

let us know your thoughts or maybe do a review on it when it comes in please. Im interested to see how this plane performs.

we can always swap out the servos


thanks

#7 rcguy1958 Jan 16, 2012 05:51 AM

Looks nice, finally larger servos for the tail and real hinges...some one in china is listening a little. I think I'd have to try this one on the stock setup( if the servos are solid on the bench anyway...no jittering and center well). I also like the fact that it's being promoted as " sport/3d capable", and the mention of keeping it lighter for 3d with smaller batteries. This may be where my tax money is going.

#8 Hilde Jan 16, 2012 06:36 AM

"This is an email from hobbyking's backend warehouse.
We would like to inform you that your product(s) have been picked & are being sent to the front-end warehouse for packing.
It will take 24hrs for the box to arrive in the front-end warehouse, there it will be packed and shipped out to you.

I plan to check everything closely and if possible use all of the stock gear. Along the way I'll give you my opinions. I currently fly PNP models from Dynam and Airfield, so those are my fit and finish comparisons.

#9 acesimmer Jan 16, 2012 11:14 PM

Quote:

Originally Posted by Hilde (Post 20438932)
"This is an email from hobbyking's backend warehouse.
We would like to inform you that your product(s) have been picked & are being sent to the front-end warehouse for packing.
It will take 24hrs for the box to arrive in the front-end warehouse, there it will be packed and shipped out to you.

I plan to check everything closely and if possible use all of the stock gear. Along the way I'll give you my opinions. I currently fly PNP models from Dynam and Airfield, so those are my fit and finish comparisons.

Whats the price is it in the USA warehouse?

#10 stalyoni Jan 17, 2012 12:08 AM

Quote:

Originally Posted by Hilde (Post 20438932)
"This is an email from hobbyking's backend warehouse.
We would like to inform you that your product(s) have been picked & are being sent to the front-end warehouse for packing.
It will take 24hrs for the box to arrive in the front-end warehouse, there it will be packed and shipped out to you.

I plan to check everything closely and if possible use all of the stock gear. Along the way I'll give you my opinions. I currently fly PNP models from Dynam and Airfield, so those are my fit and finish comparisons.

ok thank you very much.

#11 simo71 Jan 17, 2012 12:33 AM

Missed out on this one.

#12 Score0985 Jan 19, 2012 11:12 AM

just ordered one this morning, back in stock. Let you know how everything comes out.

#13 stalyoni Jan 19, 2012 11:50 PM

looks like they have released an orange version of this plane as well

http://www.hobbyking.com/hobbyking/s...00mm_PNF_.html

http://www.hobbyking.com/hobbyking/s...RANGE-MAIN.jpg

http://www.hobbyking.com/hobbyking/s...RANGE-SUB3.jpg

I think I prefer the original black one myself. Lets hope these make it to the Australian wharehouse soon. It would cost me about $200 after shipping for this bird atm. Plus some 4s lipos and some other things.

#14 Schrottflyer Jan 20, 2012 11:35 AM

They looks great, must have Factor goes too 100% hope it flys like it looks:D:popcorn:

#15 poiyt Jan 21, 2012 08:29 AM

New HK Sbach vs Dynam Sbach
 
Fellas if any of you who ordered this Sbach might already have the same (but slightly smaller) version from Dynam, pls put up a comparison review soon.

Shipped, to where I am in ATL here, they're virtually the same price. I have the Dynam version and was thinking about getting a spare, then saw this thread.

May the best plane win!!


All times are GMT -5. The time now is 03:32 PM.