RC Groups

RC Groups
    DIY Electronics
        FAQ some diy controller designs for brushed controllers

#1 Ron van Sommeren Oct 06, 2003 04:44 PM

diy brushed controller designs, compilation
 
Compilation of a brushless ESC designs:
www.rcgroups.com/forums/showthread.php?s=&threadid=140454


DIY controller designs for brushed motors.

Please report dead links.
Met vriendelijke groet ;) Ron van Sommeren
diy outrunner brushless e-motor discussion.
Electric fly-in Nijmegen, the Netherlands.

#2 babblefish Oct 06, 2003 08:58 PM

Yes...

Brushed controllers plus one semi-commercial BL:

http://members.tripod.com/~TrEbOr69/speedcnt.html
http://jaichi.virtualave.net/electr-e.htm
http://www.welwyn.demon.co.uk/by_me.htm
http://members.tripod.com/Peter_Horvat/myprojects.htm

#3 whanderson Oct 07, 2003 02:52 PM

Check out the Microchip Web site www.micrchip.com for AN847. It has theory of operation, schematics, and software. Definately worth a look

#4 TugBoat Jan 15, 2004 09:34 PM

For anyone interested there is a 12F675 based ESC, construction details etc., that I am using described here:

http://www.designsoft.com.au/ahome/rc/PIC-ESC/ESC.html

The following link also has useful information:

http://homepages.paradise.net.nz/bha...ectronics.html

#5 arx_n_sparx Jan 15, 2004 10:27 PM

Are there any DIY projects for a brushless motor. I have an AXI 2212/34 on order

Thanx

Brad

#6 Ron van Sommeren Jan 20, 2004 08:40 AM

Added:
http://www.rcgroups.com/forums/showt...hreadid=190829

Brushless diy designs:
http://www.rcgroups.com/forums/showt...hreadid=140454

#7 Ron van Sommeren Aug 22, 2004 12:34 PM

Discussion on this design:
http://www.designsoft.com.au/ahome/rc/ -> "Brushed Motor ESC"

http://www.rcgroups.com/forums/showthread.php?t=259623

Met vriendelijke groet ;) Ron van Sommeren

#8 Ron van Sommeren Sep 11, 2004 04:51 AM

http://fmxstart.tripod.com/projects/...ontroller.html
http://perso.wanadoo.fr/claude.dreschel/variateur_pwm/

#9 soren Sep 11, 2004 04:53 PM

Look here for a lot of places to find information about brushed controllers:
http://rcgroups.com/links/index.php?...at=204&id=3304
..The E-zone from the lab september 1999, where I was a guest columnist...

Soren

#10 Ron van Sommeren Oct 06, 2004 06:31 AM

Added Stefan Vorkoeters designs:
http://www.capable.ca/rcstuff/ -> Motor control

#11 norbique Oct 13, 2004 05:21 PM

Another one:
http://norbique.rchomepage.com/esc/index.htm

#12 Hovertime Jan 23, 2005 04:15 PM

Just wanted to thank you guys for information!

#13 Ron van Sommeren Jun 13, 2005 08:34 AM

Added
http://norbique.rchomepage.com/

#14 lostrider Aug 23, 2005 10:31 AM

http://www.capable.ca/rcstuff/esc.htm
i have built this,
on the test:without the radio;
when s1 is on: motor power is full; but
i cant see any voltage on ch+ and ch- cables???
so my radio dont work; without the power?

#15 lostrider Aug 23, 2005 10:33 AM

i've checked all solderings but cant find anything seems wrong???


All times are GMT -5. The time now is 08:29 AM.