RC Groups

RC Groups
    RC Hovercraft
        Discussion Whitman’s Marauder Hovercraft

#1 PegasusNY Nov 01, 2011 08:41 AM

Whitman’s Marauder Hovercraft
 
Hi everyone. I'm new to this forum which I discovered while doing a search on the Whitman’s Marauder Hovercraft. My late father bought it years ago and never put it together. All parts still in the box WITH instructions and a OS .60 engine.

I'm 51, a Systems Administrator (AKA Network Admin) and have built cars, planes, gliders, and boats so building this hovercraft will be a new and interesting experience. Hopefully I'll get started on it soon. I'll take a few pics as I'm building it and post them now and then (if anyone is interested :) ).

I plan on scanning the instructions into my laptop and creating a word DOC or a PDF. If anyone wants a copy (I've seen a few threads where some members were looking for a copy), I'll email it or get it to you somehow.

(He also left me a partially built Concept 30 helicopter which will be interesting to work on!)

#2 cparsons Nov 01, 2011 04:26 PM

I wouldn't mind a look at the plans if you don't mind?

You can send them to parsons.cj@gmail.com if you have a minute

Thanks and best wishes

Chris Parsons

#3 PegasusNY Nov 01, 2011 05:37 PM

Quote:

Originally Posted by cparsons (Post 19758099)
I wouldn't mind a look at the plans if you don't mind?

You can send them to parsons.cj@gmail.com if you have a minute

Thanks and best wishes

Chris Parsons

I created a PDF file and it's on it's way. :)

#4 oacilamaf Nov 05, 2011 08:46 AM

Hi,

I would like to take a look at those plans too...
If you dont mind sending them my email is japsampaio@hotmail.com

Thanks
Best regards
JS

#5 PegasusNY Nov 08, 2011 07:19 PM

Hi JS, Sorry it took so long to get back to you. It's in your inbox.

Don

#6 nihil Nov 16, 2011 11:46 AM

Add one more for interested to see the plans.

nihil[at]nihil.rchomepage.com

-a fellow BOFH

-------
Visit me at RCGroups Chat!

#7 PegasusNY Nov 18, 2011 04:27 PM

Hi nihil,

It's on it's way.

#8 PegasusNY Nov 18, 2011 04:32 PM

Well, so far it's about half built. As soon as I get some time I'll upload a few photos.

And, as much as I'd like to finish building the Concept 30 SX heli I just don't have time for it... I think I'll be looking for a place to sell it.

That's it for now...Pics coming soon!

#9 PegasusNY Dec 01, 2011 01:37 AM

33 Attachment(s)
I'm too tired to add details but I wanted to get some pics up.
If you want pics of certain areas that I didn't get just ask and I'll get them asap.

I still have to get a new air cleaner (didn't like the original) and a few other things...

#10 Kmot Dec 02, 2011 04:01 PM

You did a great job of building! Looks perfect!

I never took pics when I built mine, so I am saving all of your excellent photos. :D

#11 PegasusNY Dec 02, 2011 05:00 PM

Quote:

Originally Posted by Kmot (Post 20033675)
You did a great job of building! Looks perfect!

I never took pics when I built mine, so I am saving all of your excellent photos. :D

Thanks! Let me know if there is any additional photos you'd like - before I get nitro exhaust all over it!
It was/is fun to build. I'm still looking for an air cleaner setup, possibly something from a 4WD buggy.

I also have to get a drill bit the same size as the shaft of the OS .61 so I can drill out the prop to fit.

Then to break in the engine. Any pointers?
I've read various posts on the net about how to break it in, most with different techniques.

#12 Kmot Dec 03, 2011 05:55 PM

I think your pics pretty well covered it, thanks!

Is your engine a ringed type or an ABC type? Because it makes a difference in the way to break-in the engine.

First though, is I strongly recommend you remove the engine from the vehicle and instead use an engine test stand. Trying to break it in while in the hovercraft will be a hassle and potentially dangerous.

I hope you have an electric starter for it? Especially when it is in the vehicle, you will need one.

#13 PegasusNY Dec 04, 2011 12:13 AM

It's a ringed (heli) engine (OS Max .61 SX-H, P/N 17910).

I don't have an engine test stand, guess I'
ll have to construct one!

And yes, I have an electric starter (complete field flight box).

#14 Kmot Dec 04, 2011 12:54 AM

Okay, the normal procedure for breaking in a ringed engine is to first run it very rich, slobbering rich, for a tank or two. Then start leaning it out on subsequent tanks. Every now and then lean it to peak RPM for about 10 seconds and then richen it back up to where it was before. Let it cool completely to ambient air temps between tankfuls.

A break-in prop for an airplane 60 sized engine is 12x6.

I make break-in props using an old method I got from a Harry Higley book. Take the normal prop size and add 1". Then cut 2" off the prop. So for a 12x6, you would get a 13x6, and then cut it back to 11x6. The idea is to make a prop that has a stiffer blade, produces copius cooling air, and a slightly lighter load.

Use a fuel that has blended oil, using both synthetic and castor oil. 10% nitro is good for break-in. I recommend either Powermaster or Wildcat.

#15 PegasusNY Dec 05, 2011 08:05 PM

Thanks for the info Kmot, much appreciated.
I have several 12x6 props and I have yet to get the fuel.
Then find some time to get it done! :)


All times are GMT -5. The time now is 10:09 PM.