RC Groups

RC Groups
    Aircraft - Electric - Multirotor (FS/W)
        Sold Small Carbon Quad frame with Pulso motors and esc's

#1 W4HFV Oct 12, 2011 01:45 PM

Small Carbon Quad frame with Pulso motors and esc's
 
4 Attachment(s)
This was a project that i lost interest in. Frame is carbon fiber and the arms are 10mm aluminum. I ran each motor up individually to determine the rotation and amp draw but this has never been hooked to electronics or flown. Deserves a better home. Has the Pulso X2208 motors. http://montorc.com/x220834.aspx and the pulso Esc's found here http://montorc.com/dl11a.aspx Motors are $41 each and the esc were $22 each. Comes with an extra arm, mikrokopter cover and a bunch of extra 8" props. Asking $230 for everything OBO. Ill take care of the shipping too. Email me at w4hfv@juno.com or call me at 704-201-4644 with any questions.

#2 zuby1 Oct 12, 2011 01:56 PM

No flight controller?

#3 W4HFV Oct 12, 2011 01:59 PM

Nope you can use ardupilot Mega or similar. There is like 6 out now.

#4 Murphy Rebel Oct 13, 2011 01:25 AM

Would you be interested in posting to Australia?

Cheers
Aaron

#5 AP7d Oct 13, 2011 04:55 AM

Hey I shot you an email, have you tested the 1100kv motors? I have always understood anything over 1000kv was kinda unstable for a quad, how did it work for you?

#6 Z06 Tony Oct 13, 2011 08:09 AM

Quote:

Originally Posted by AP7d (Post 19580598)
Hey I shot you an email, have you tested the 1100kv motors? I have always understood anything over 1000kv was kinda unstable for a quad, how did it work for you?

That is not correct. I have stable quads running 2000kv motors. As a rule of thumb generally the higher the kv the smaller the prop. So when u build a quad u choose your motors based on your weight and frame/prop size. Those are good motors and will work nice with that size quad.

#7 kd4wen Oct 14, 2011 08:03 PM

Is this package still up for sale?

#8 W4HFV Oct 24, 2011 08:37 AM

still for sale

#9 W4HFV Oct 28, 2011 08:20 PM

bump

#10 AP7d Oct 29, 2011 10:37 AM

Have you flown this thing? On the montorc website it says that pulso esc's are super advanced and you might run into problems with them running multicopters.

#11 W4HFV Oct 30, 2011 09:33 PM

It says the advanced functions are not suitable for quad rotors. Use the basic ones that are programmed in right now and you should be fine. I programmed these with the program card and they seemed to do fine.


All times are GMT -5. The time now is 11:41 PM.