RC Groups

RC Groups
    Aircraft - Fuel - Engines and Accessories (FS/W)
        Sold NGH GT17cc gas engine NIB

#1 ibcinyourc.com Jun 03, 2011 08:45 AM

NGH GT17cc gas engine NIB
 
4 Attachment(s)
NEW! Intoducing the brand new NGH GT17cc gas engine.
Will fit most .90-1.40 models.

Complete with muffler, rcexl ignition and spark plug. 1/4 32


Specifications:
For 0.60-0.90 Airplanes!

Specifications:
Engine Type - Gasoline Two-stroke, Air Cooled, Rotary Valve
Cylinder Type - Precision Steel Sleeve
Cylinders - Single
Crank Type - Forged Dual Ball Bearing Support
Mounting Type - Beam or Rail Mount
Carburetor Type - Walbro WT Series
Carburetor Mounting - Front
Crankshaft Threads - 5/16" X 24 TPI
Mounting Dimensions - Owners Manual or Website
Spark Plug Type - 1/4" X 32 TPI
Displacement -1.02 cu in.(16.91cc)
Bore - 1.14 in. (29mm)
Stroke - 1.01 in (25.6mm)
Engine+ Muffler+ Ignition (Total Weight) = 1 lb. 14 oz. (850g)
Prop Range - 14x8,15x8,16x8
RPM Range - 2100-9000
Fuel - Unleaded Gasoline With High-Quality Two-Cycle Oil, Pre- Mixed
Compression ratio - 10
Pre-Mix Oil Ratio and Type - Synthetic Break-in with 20:1, General 25:1, For Air Cooled Engines
Performance :
Prop RPM
JXF 14x8 9000
JXF 15x8 8000
JXF 16x8 7000


The engine comes complete with everything shown in the picture; engine, muffler, CDI ignition, and a one year USA warranty. Our engines have individualized serial numbers from the factory.


$245 shipped and insured
Pay-pal prefered

#2 gregory.da Jun 03, 2011 01:23 PM

:)
Quote:

Originally Posted by ibcinyourc.com (Post 18406850)
NEW! Intoducing the brand new NGH GT17cc gas engine.
Will fit most .90-1.40 models.

Complete with muffler, rcexl ignition and spark plug. 1/4 32


Specifications:
For 0.60-0.90 Airplanes!

I'm assuming you mean .90-1.4 four strokes and .60-.90 two strokes, correct? Looks interesting especially with the weight and upgraded RxCel ignition. :)

#3 ibcinyourc.com Jun 03, 2011 01:44 PM

Yes that is correct, I mean .90-1.4 four strokes and .60-.90 two.

#4 TimBle Jun 23, 2011 08:03 AM

dimensions?

#5 ibcinyourc.com Jun 30, 2011 10:35 AM

Quote:

Originally Posted by TimBle (Post 18575407)
dimensions?

you can go to www.ibcinyourc.com
Under engines NGH and find dimensions for the 17cc
Sorry for late reply.
Thanks Mike


All times are GMT -5. The time now is 03:00 PM.