RC Groups

RC Groups
    Multirotor Talk
        New Product ALLINONE THREAD------allinone--allinone MCU--allinone II

#1 arnaldo26 Mar 26, 2011 06:15 AM

ALLINONE THREAD------allinone--allinone MCU--allinone II
 
5 Attachment(s)
ALLINONE II
http://static.rcgroups.net/forums/at...g?d=1305733382
HMC5883L Triple Axis Magnetometer
BMA180 Triple Axis Accelerometer
BMP085 Barometric Pressure Sensor
ITG3200 Triple-Axis Digital-Output Gyro
NEO-6Q Ublox GPS receiver
Dimensions 55x16mm

----------------------------------------------------------------

ALLINONE + MCU
http://www.rcgroups.com/forums/showa...8&d=1305057993
http://stores.ebay.it/Special-RF-des...=p4634.c0.m322
"All In One +MCU I add arduino to All In One board and connectors for ESC, RX, LCD, FTDI usb board and servo control. Great for MultiWii copter or other Arduino code. Board size 25x30mm" csg_eu
----------------------------------------------------------------
ALLINONE BOARD.
http://www.rcgroups.com/forums/showa...9&d=1301138059

http://www.baronerosso.it/forum/atta...0828-copia.jpg(NEW WITH LLC)

this PCB includes the best sensor for our multicopter:

-HMC5883 Triple Axis Magnetometer
-BMA180 Triple Axis Accelerometer
-BMP085 Barometric Pressure Sensor
-ITG3200 Triple-Axis Digital-Output Gyro

Build in ultra low noise linear LDO voltage regulator.
I2C all sensors connected to I2C bus 5V with LLC

LLC PINOUT
http://www.rcgroups.com/forums/showa...6&d=1302773848

...at a special price of 99$ for now...
the board will work with multiwii code if (thanks pipersw):
- change the BMA180 address to 0x82 in the code
- solder to GND the AD0 pin of the ITG3200
- solder CLK to GND
-NEW change this code(in serial.pde):
#define MAG_ORIENTATION(X, Y, Z) {magADC[ROLL] = X; magADC[PITCH] = Y; magADC[YAW] = Z;}
to
#define MAG_ORIENTATION(X, Y, Z) {magADC[ROLL] = -Y; magADC[PITCH] = X; magADC[YAW] = Z;}

you can purchase it at:
http://stores.ebay.com/Special-RF-de...=p4634.c0.m322
or contact CSG_EU

MULTIWII + ALLINONE. COMPASS WORK PERFECTLY
MULTIWII + ALLINONE. COMPASS WORKS PERFECTLY (0 min 48 sec)


VIDEO TEST OF ALLINONE BOARD(ACRO+STABLE+BARO+COMPASS):
MULTIWII + ALLINONE (4 min 2 sec)


FIRST VIDEO OF ALLINONE BOARD ON MULTIWII GUI
Sensor board test (0 min 28 sec)



FIRST FLIGHT OF ALLIONE BOARD ON MULTIWII (ONLY GYRO AND ACC)
http://www.youtube.com/watch?v=U50au58KV2o

#2 timecop Mar 26, 2011 06:28 AM

Sweet, while FreeIMU guys are sitting with their fingers up their butt, an enterprising Chinaman steals the spotlight.

#3 arnaldo26 Mar 26, 2011 06:30 AM

Quote:

Originally Posted by timecop (Post 17790621)
Sweet, while FreeIMU guys are sitting with their fingers up their butt, an enterprising Chinaman steals the spotlight.

NOt chinaman.....germanman!!!!!!

#4 suarez Mar 26, 2011 06:46 AM

da ist ja wirklich alles drauf, aber:

Missing a 328P! :)

Or what else are all waiting for:confused:



@arnaldo
Kumpel hat eine arduino microplatine nur mit dem itg3200 und einem ACC gemacht.
Wo kann man sowas bestücken lassen, also Serie kleiner 50 Platinen?

gruss
roland

#5 arnaldo26 Mar 26, 2011 06:51 AM

Quote:

Originally Posted by suarez (Post 17790679)
da ist ja wirklich alles drauf, aber:

Missing a 328P! :)

Or what else are all waiting for:confused:



@arnaldo
Kumpel hat eine arduino microplatine nur mit dem itg3200 und einem ACC gemacht.
Wo kann man sowas bestücken lassen, also Serie kleiner 50 Platinen?

gruss
roland

i'm not german...and i'm not the seller...I'm just making public the availability of this board

#6 rimshotcopter Mar 26, 2011 09:03 AM

Wow, Nice.

#7 milouze Mar 26, 2011 09:21 AM

Which code is used to drive it?
Seems interesting...

#8 timecop Mar 26, 2011 09:22 AM

Same design problems as Jussy's stuff though, no I2C level shifter, so not-so-5v-friendly.
Hopefully 5883 on THAT board actually works, too.

#9 arnaldo26 Mar 26, 2011 09:57 AM

Quote:

Originally Posted by milouze (Post 17791446)
Which code is used to drive it?
Seems interesting...

you can use it with all projects that work with these sensors...like multiwii...

#10 kinderkram Mar 26, 2011 10:08 AM

Quote:

Originally Posted by suarez (Post 17790679)
da ist ja wirklich alles drauf, aber:

Missing a 328P! :)

Or what else are all waiting for:confused:



@arnaldo
Kumpel hat eine arduino microplatine nur mit dem itg3200 und einem ACC gemacht.
Wo kann man sowas bestücken lassen, also Serie kleiner 50 Platinen?

gruss
roland

This is an I2C sensor board. You need a flight controller to attach it.

Try Seeedstudio for a prototype fabrication.

#11 kinderkram Mar 26, 2011 10:10 AM

Quote:

Originally Posted by arnaldo26 (Post 17791749)
you can use it with all projects that work with these sensors...like multiwii...

Did you already try & fly it?
I wouldn't buy an item that I didn't see airborne. ;)

#12 timecop Mar 26, 2011 10:17 AM

Quote:

Originally Posted by kinderkram (Post 17791877)
Did you already try & fly it?
I wouldn't buy an item that I didn't see airborne. ;)

As opposed to buying an item that's been in beta for exactly 3 months and still haven't managed to start full/proper production??

#13 arnaldo26 Mar 26, 2011 10:21 AM

i hope i will receive one of these as soon as possible and i will inform you! ;)

#14 kinderkram Mar 26, 2011 11:37 AM

Quote:

Originally Posted by arnaldo26 (Post 17791965)
i hope i will receive one of these as soon as possible and i will inform you! ;)

Ok, thx! :popcorn:

#15 pipersw Mar 26, 2011 12:53 PM

I have order one on Ebay, need only a voltage level converter.


All times are GMT -5. The time now is 06:12 AM.