RC Groups

RC Groups
    R/C Blogs
        Discussion Airborn 1600 build Fuselage construction

#1 Jay Burkart Feb 26, 2011 07:58 PM

Airborn 1600 build Fuselage construction
 
16 Attachment(s)
Got all the sides joined and started finishing the insides of the fuselages. Slide in Landing gear mounts, Wing Trailing edge wing mount reinforcements,
stringers for cowling.
All are mounted in all three. We are setting up with 5/32 landing gear wire as the
targeted flying weight will be 114 oz to use the 1900mah 3S lipos.
Probably 10 to 18 oz of ballast will be needed to make the weight rule.
I am guessing that the finished weight with all the gear will be around
100 oz for the LMR and 96 for the Texaco.
That will bring us close to the 10 oz/sq ft target.


All times are GMT -5. The time now is 06:56 PM.