RC Groups

RC Groups
    Batteries and Chargers
        Help! Help run a DELL DPS-600FB

#1 erevovod Feb 05, 2011 10:45 AM

Help run a DELL DPS-600FB
 
Tell me how to convert a power charging? What kind of contacts are closed to run it.

http://forum.rcdesign.ru/uploads/pos...b?d=1296337618

Regards from Russia

#2 mrforsyth Feb 05, 2011 01:04 PM

No need to pop the lid.

Look here and here.

Are your certain that your PS is a DPS-600? It appears different than Wayne's PS.

Welcome to RC Groups!

Mark

Edit: Suffix on P/N appears to be critical. Link provided is for a DPS-600PB while your PS is a DPS-600FB. Will keep searching....

#3 erevovod Feb 05, 2011 04:00 PM

Here is the photo

You can find the schema of the power supply or circuit connector?

http://forum.rcdesign.ru/uploads/pos...b?d=1296337618

http://forum.rcdesign.ru/uploads/pos...b?d=1296337618

#4 erevovod Feb 05, 2011 10:51 PM

Who can give a hand, please:

Where to find startup connections for this power supply?

Enjoy a nice day

#5 arbilab Feb 05, 2011 11:07 PM

Jumper green wire to (any) black wire will turn supply on.

If that's what you're asking.

#6 erevovod Feb 06, 2011 04:32 AM

Need to start using this connector on the other he was not involved

https://lh6.googleusercontent.com/_n...YXCc/razem.jpg

Tell me where you can find circuits on the PSU

Please, really need.

#7 erevovod Feb 06, 2011 03:51 PM

How do I know which pins are shorted?

#8 erevovod Feb 08, 2011 08:01 AM

Tell me please step by step how to run the DELL DPS-600FB

#9 pitymdp Apr 22, 2011 01:35 PM

Hi, a have a dell DPS-600FB power supply turn on !!
 
Quote:

Originally Posted by erevovod (Post 17346139)
Tell me please step by step how to run the DELL DPS-600FB

To power or the supply (turn on/off) see the picture of the pin-out. From left to rigth, the 4 first pinout are 5V (+5V +5V 0V 0V). To turn-on short 0V to the left-bottom little pin. Sorry by my bad english (hablo Español).

||__||__||__||__ . . . . . . ___||__||__||__||__||__||
||__||__||__||__ . . . . . . ___||__||__||__||__||__||
||__||__||__||__ . . . . . . ___||__||__||__||__||__||
||__||__||__||__ . . . . . . ___||__||__||__||__||__||
5V._5V._0V._0V._ | _ _ _ _ _ 0V._0V._0V._12V_12V.12V
._._._._._._._._. _ |
._._._._._._._ this pin to 0V
._._._._._._._ to turn-on ;)

#10 corollaups Jan 30, 2014 01:34 PM

I have the same power supply (dell dps600fb), which used to run fine. Suddenly its power cord green led (bottom left) does not light up when power cord is connected. Any ideas ?


Quote:

Originally Posted by erevovod (Post 17321187)
Here is the photo

You can find the schema of the power supply or circuit connector?

http://forum.rcdesign.ru/uploads/pos...b?d=1296337618

http://forum.rcdesign.ru/uploads/pos...b?d=1296337618


#11 altiforti May 01, 2014 04:44 AM

Very good it works ! glad to get more infos
 
:)super
Quote:

Originally Posted by pitymdp (Post 18039728)
To power or the supply (turn on/off) see the picture of the pin-out. From left to rigth, the 4 first pinout are 5V (+5V +5V 0V 0V). To turn-on short 0V to the left-bottom little pin. Sorry by my bad english (hablo Español).

||__||__||__||__ . . . . . . ___||__||__||__||__||__||
||__||__||__||__ . . . . . . ___||__||__||__||__||__||
||__||__||__||__ . . . . . . ___||__||__||__||__||__||
||__||__||__||__ . . . . . . ___||__||__||__||__||__||
5V._5V._0V._0V._ | _ _ _ _ _ 0V._0V._0V._12V_12V.12V
._._._._._._._._. _ |
._._._._._._._ this pin to 0V
._._._._._._._ to turn-on ;)


#12 tntpoof May 01, 2014 05:33 AM

1 Attachment(s)
Here 2 over 2 down.. those 3 pins..if ps is inverted alos this is for switch to turn ps on.. you can jump other pins for more voltage..up to 14.2 volts .. this way its 12.6.. hope this helps.

#13 Carlos Cordova Nov 15, 2014 09:57 PM

Dell DPS-600fb
 
Me puedes decir con cual encenderla que no entendí el diagrama por favor saludos


All times are GMT -5. The time now is 07:55 AM.