RC Groups

RC Groups
    Scale Boats
        Build Log Sternwheeler Towboat

#1 Rmay Jan 09, 2011 04:28 PM

Sternwheeler Towboat
 
10 Attachment(s)
This build is dedicated to memory of Joe Brown.

Know on this and many other forums as TowboatJoe, we all owe a great debt of gratitude for his insightful and inspirational help over the years. I discovered his website years ago and have benefited both in my skills and understanding of the craft of building towboat models. My model of the Major is based on input and pictures so kindly offered by Joe early in this build. His input continued during the build right up to his last days.

Although Joe is no longer with us the knowledge and passion of workboats he shared will live on.


_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _


Started work today on a Sternwheeler Towboat. Only got a little done today as I discovered I need a heater in my shop. Temps dropped 10 degrees since this morning.

#2 Kmot Jan 09, 2011 04:31 PM

Cooooool! :D

#3 patmat2350 Jan 09, 2011 07:30 PM

Fun. Looks a lot like:
http://www.rcgroups.com/forums/attac...mentid=3456840

#4 towboatjoe Jan 09, 2011 08:25 PM

A friend of mine, Bernie Kain, built a 1:32 scale model of the Barbara back around 1990 before Steve bought her and renamed her Barbara H. It was fully detailed inside and ran great.

#5 Prins Willem Jan 09, 2011 09:18 PM

There is a sternwheel towboat on display at the National Mississippi River Museum, the Logsdon. Not as big as the Barbara H. I wish i had gotten photos the last time I was out there. Guess I have to make another trip this summer.

http://www.steamboats.org/steamboat-...s/logsdon.html

http://www.mississippirivermuseum.com

In the photo on wikipedia you can just see her past the pilot house and fence.

http://en.wikipedia.org/wiki/Nationa...m_%26_Aquarium

#6 towboatjoe Jan 09, 2011 09:48 PM

6 Attachment(s)
I found a photo of the Doanld B model Bernie built. Barbara H used to be the Donald B
i built a 1:32 scale model of the Lady lois still working the Ohio and Kanawha Rivers today.

I also built a 1:48 scale model of the George M Verity. It's a museum in Keokuk, IA

#7 MILLERTIME Jan 09, 2011 10:37 PM

I'm watching this build.

#8 Rmay Jan 10, 2011 04:54 AM

I think that's what I really like about this forum - you post and get lots of great replies.

towboatjoe: I know about your site, been there many, MANY times. In fact got most of my motivation from reading your site.

My towboat will be similar to the Barbra H, but since I'm not working from any plans I’ll just create a prototype of my own that embodies all the great characteristics of many of these great boats.

Thanks guys!

#9 towboatjoe Jan 10, 2011 08:41 AM

8 Attachment(s)
Here's an easy to build sternwheeler that has the drive in the center of the wheel. It's owned by Madison Coal and Supply, Charleston, WV. They also own the Lady Lois and Laura J.

This boat has a straight shaft, but there are some with split wheels that can reverse one side while the other side goes forward.

#10 Rmay Jan 10, 2011 05:47 PM

Thanks for the great pictures and layout. Tempting to build the Major, but I think the split drive would be a problem this late in the construction. Towboatjoe do you know if the Barbra H had rudders off the stern only or duel rudders - forward and aft of the wheel?

#11 towboatjoe Jan 10, 2011 06:09 PM

i know she had three monkey rudders (aft of wheel) i'm not sure about the steering rudders (forward of wheel) I'll email Bernie and see if he can tell me.

#12 towboatjoe Jan 10, 2011 06:19 PM

4 Attachment(s)
I sent Bernie an email. I asked him to join us here. We'll see. Here's plans for Lady lois. you can use these for the wheel. She had two steering rudders and two monkey rudders.

I've got photos of both lady Lois and Major. Anyone who plans to build them can email me for photos towboatjoe@yahoo.com

You can see more photos of the Lady lois and George m Verity models here
http://www.towboatjoe.com/models.htm

#13 towboatjoe Jan 10, 2011 06:21 PM

I agree with everyone else here and I can't wait to see how your build comes along. Happy modeling and take lots of photos.

#14 Prins Willem Jan 10, 2011 07:24 PM

6 Attachment(s)
Your thread got me thinking about a former member of our club. He had a beautiful western stern wheeler. I don't know if you will be as ambitious as he was making your wheel. His had 1100 nuts and bolts holding it together. We all figured there was one more nut running loose. :D

At that time another member had built a cheesy little paddle wheel boat from some plans in a magazine. It had foil & pinstripe windows and a o-ring belt to drive the wheel. As it would travel it squeeked. Kids loved it. He would point at his boat and yell over to the other member that there wasn't one screw in his paddlewheel.

#15 John Fryant Jan 10, 2011 09:01 PM

Prinz Willem, That model in your post is the W.H. Bancroft, An Alaska sternwheel workboat built in Seattle WA in 1907. I sell the plans for her at 1/4" = 1' scale. The Bancroft was a freight boat originally built for hauling freshly caught fish (probably salmon) from the Seine boats that cought them to the cannery. She was owned by the Northwest Fisheries Co. and worked around the mouth of the Copper River, In AK


All times are GMT -5. The time now is 10:20 AM.