RC Groups

RC Groups
    RC Tanks
        Build Log Tiger 1 Winter, Recoil, EL MOD, New Smoker unit, pics & Video coming soon

#1 Blitzkrieg65 Nov 28, 2010 09:50 PM

Tiger 1 Winter, Recoil, EL MOD, New Smoker unit, pics & Video coming soon
 
8 Attachment(s)
Hello All,

Here is the latest custom build from RCTW. If you look closely at the pictures you can see how easy it is to install EL MOD. I have lengthen the HL dual 8 pin connector just for the customers convenience but not necessary! Notice it plugs right into the top hull and the other side plugs into the EL MOD board ECO or PRO version, you are done with your turret move, elevation, lights, cannon/airsoft/recoil. 3 connectors on the main board 2 for the motors, 1 for the power. Blaster IV comes with volume knob. Then you plug in the new speaker, 28 different complete tank sounds ready to go for you to choose from.

Here is the list of what this tank has, and then some!


Tiger 1 Asiatam metal hull
Tiger 1 complete top hull Recoil/flash, metal barrel, brass muzzle brake,
5 metal hatches, metal MG
EL MOD ECO Version drive board Easy install version, NO soldering or electrical background needed
EL MOD Blaster 4 sound board with Sony 70 watt speaker
CSI Tamiya compatible IR combat sensors
Asiatam gearbox with Max 400 motors
Asiatam late metal upgrade kit
Tiger 1 metal roadwheels
1 5000 mili-amp 7.2 volt NiMH batteries
RDS 8000 8 channel radio & receiver
Charge port and switch’s installed under the hatches
Custom paint job, decals with weathering & combat damage
Super Smoker coming to RCTW in 2011

Here are a few pictures of the build .

Video


Tiger 1 winter camo IR RC Tank, a beast.wmv (5 min 48 sec)












The Blitz

#2 duca Nov 30, 2010 04:17 PM

Awesome bro!!!!

#3 duca Nov 30, 2010 04:17 PM

RCTankWars Rocks Man...........

#4 Blitzkrieg65 Dec 06, 2010 01:20 AM

5 Attachment(s)
Quote:

Originally Posted by duca (Post 16692669)
RCTankWars Rocks Man...........

Duca,,

What is up man, when are you going to get your Sherman IR ready so you can team up with Joe (Yellowshaker) and whoop some Tamiya butt at the next NEAD event??


OK check this out...


Before this tank shipped, I sprayed on my own decal, by adding the German cross, to the empty side.

I thought some guys might want to give it a try if they don' t have decals.

I did not worry too much about being exact or having all the edges smooth,

as this tank is suppose to have been in the field for a while. The numbers on the side are sprayed on as well,

using a stencil kit, just spray lightly!

The Blitz


All times are GMT -5. The time now is 11:04 PM.