RC Groups

RC Groups
    R/C Blogs
        Discussion New Scratch build Tomhe's design

#1 Eastcoast78 Oct 20, 2010 11:01 PM

New Scratch build Tomhe's design
 
New Scratch build Tomhe's Eurofighter
RCtimers 2212-6
30Aesc
Tunergy 1300mah 25-35c
HK9G servos
OrangeRX/DX6i
ScratchBuilt EuroFighter (2 min 12 sec)

#2 soundcheque Oct 21, 2010 11:36 AM

4 Attachment(s)
What an excellent build. I like your idea of the doublers down the fuz. and you paint job just makes it all blend in.:D

I also double up on mine but it don't look as cool as yours. Well done.:D

The CG is spot on at 12cm and mine comes in at around 20oz AUW.
I used the Lil' Screamers Super Park Jet whith a 7x5 prop as I thougth it would be more powerful than the 2212/6 which I have on all my other builds.

I modofied the belly to fit the 7x5 in. I'm happy with my build and
I fly it regularly but it is a little underpowered compared to the other jets.

With the 6mm Deron which I used there seemed to be a lot of flex from front to back from the very rear end to the wing break so I made some "Missile rails" to counter the flex.

If you like the Typhoon You'll love the SU37 and the F22 by Tom.

Regards. Noel

#3 Eastcoast78 Oct 23, 2010 12:44 AM

Cool man your looks great as well.:D It didnt go so well on the Maiden.But i got her all fixed up now,planning on doing the Airbrush touch ups tomorrow:p
I was missing around with some dollar store foam.nit sure if you guys have that over your way,im just on the other side of the Pond in Newfoundland.
Im planning on making some Engine outlets on theback.
Say starting Midways on the Aft side of the Prop and taking 60% of a cone shape and cuving it.i test fit a peice and its going to looks SWEEEEET:)


All times are GMT -5. The time now is 12:00 AM.