RC Groups

RC Groups
    Castle Creations
        Mini-HowTo Castle Creation Set RPM Mode Tutorial- VIDEO ** Updated **

#1 Clintstone Mar 08, 2010 04:49 PM

Castle Creation Set RPM Mode Tutorial- VIDEO ** Updated **
 
This video shows the basic function needed to set up Set RPM GOV Mode. I used an OutRage 550 as the Vehicle and I used an ICE 100 and a NEU 1907H/1y and a NRG 6s 5000 35c for the power system.
This video is intended to give a basic explanation of the set RPM mode. The PDF's found in the Sticky at
http://www.rcgroups.com/forums/showthread.php?t=1190885
are also recommended. Thanks and I hope this helps...



Click Link to Watch the video...Thanks for watching!

New Link with forward and Reverse...

Castle Quick Tip Set RPM Mode with Outrage 550 NEU 1907H.wmv (10 min 21 sec)



http://www.screentoaster.com/watch/s...s_set_rpm_mode

#2 MrE Mar 08, 2010 09:09 PM

Thanks Clint!

#3 lavi Mar 09, 2010 02:04 AM

Thumbs UP
 
Very nicely done.
very helpful, reassured me on some points.

should be sticky.

Thank you !

#4 Clintstone Mar 09, 2010 06:41 AM

Quote:

Originally Posted by lavi (Post 14546240)
Very nicely done.
very helpful, reassured me on some points.

should be sticky.

Thank you !

Thanks guys...should be a Sticky today. Sorry I have a cold and sound congested on the video. I am also going to make a compact version that is going to be about the same but run through quickly. I plan to leave them both up.

#5 gww528 Mar 09, 2010 10:07 AM

Quote:

Originally Posted by Clintstone (Post 14547081)
Thanks guys...should be a Sticky today. Sorry I have a cold and sound congested on the video. I am also going to make a compact version that is going to be about the same but run through quickly. I plan to leave them both up.


Clint, very good video. :) Although you cannot manually advance the video or if you want to repeat a section you have to go back to the beginning and hear it all again. If it is possible these two features would be nice... You-tube video has this feature.

#6 Clintstone Mar 09, 2010 10:14 AM

Quote:

Originally Posted by gww528 (Post 14548299)
Clint, very good video. :) Although you cannot manually advance the video or if you want to repeat a section you have to go back to the beginning and hear it all again. If it is possible these two features would be nice... You-tube video has this feature.

I will post them to you-tube later I have just started playing with this program and it has options for you-tube.

#7 MrE Mar 09, 2010 10:54 AM

Quote:

Originally Posted by gww528 (Post 14548299)
Clint, very good video. :) Although you cannot manually advance the video or if you want to repeat a section you have to go back to the beginning and hear it all again. If it is possible these two features would be nice... You-tube video has this feature.

Good points!

#8 Clintstone Mar 17, 2010 01:26 PM

I am traveling to RCX and I am planning on making another video upon returning home.

#9 Mr. Wiz Mar 24, 2010 12:31 AM

This thread is just what I needed. That saves me from asking a lot of questions about my new ICE 80 HV.

Thanks,

Wiz

#10 Clintstone Mar 24, 2010 09:47 PM

Quote:

Originally Posted by Mr. Wiz (Post 14677156)
This thread is just what I needed. That saves me from asking a lot of questions about my new ICE 80 HV.

Thanks,

Wiz

Glad it helped.

#11 Mr. Wiz Mar 25, 2010 01:56 PM

Quote:

Originally Posted by Clintstone (Post 14684827)
Glad it helped.

It helped a bunch. I did everything as you said and flew the heli about 20 minutes later.

Great Job!

Wiz

#12 Clintstone Mar 31, 2010 03:35 PM

Sounds Great...

#13 gr8taz nitro Apr 14, 2010 10:38 AM

This should be a sticky on the 1st page. Great information, but I forgot where I found it and spent a while hunting it down again.:rolleyes:

#14 Clintstone Apr 19, 2010 11:47 AM

bump

#15 lavi Apr 20, 2010 02:52 AM

any news with the new FW version that will anable the use of autorotation function with Vbar ?


All times are GMT -5. The time now is 08:34 AM.