RC Groups

RC Groups
    R/C Blogs
        Cool This is Alizee

#1 Flazo Jan 10, 2010 09:02 PM

This is Alizee
43 Attachment(s)
Alizee - J'en Ai Marre (Tubes D'un Jour) HD (4 min 18 sec)

check Alizee,

why not :D

Alizee - Moi Lolita (HD) very sexy (3 min 46 sec)

here is the Extra one for you

Alizée: Les collines en la Academia 2011 HD 720p (3 min 26 sec)


#2 Flazo Jun 10, 2010 08:47 AM

About the Reactor Bipe Plane,

I'm using the coronas digitals on Ailerons
HS-65 for Rudder and Elevator
Castle Creations 35
Caslte Creations BEC
Using the Recommended RimFire

I first started using the APC 11x5, it was okay... Nice
but now I'm flying with the Turnigy 11x6, wow, it really made this plane come to life...
this turnigy prop creates more Thrust. Since I'm using this E-wood prop from Turnigy, I'm not using the Spinner.

I had the Velox as you can see! But this plane may not be to Harrier like the Velox or the Extreme Flight Extra 300exp but it can so some many unthinkable Wiked manuevers that no other plane can do!.

#3 Flazo Jun 11, 2010 11:41 AM

I was on of the Last Customer to get the Last Original, 3DEPP Yak 55...
thank you mark and pictures will be up soon!

#4 Flazo Jun 29, 2010 09:04 PM

4 Attachment(s)
Reactor Mods

#5 Flazo Jul 07, 2010 08:58 PM

I'm very happy I no longer have PayPal!
Thank you God!


#6 Flazo Jul 15, 2010 09:14 AM

My Extreme Flight Setup-Extra 300EXP
but also good for all new extreme flight planes (electrics only)

Due to the high demands of pm on my setup please read the following.

CC BEC, CC ESC 60 amps
Torque 820Kv but would love to use the Hacker ( http://www.aero-model.com/Hacker-Brushless-A30-14L.aspx
I think the Hacker would work better,

HS 85mg on Elevator and HS-65mg on the Rudder and Ailerons
Supplied Carbon Fiber Servo arm on the Rudder,
and 3DHobbyShop Servo arms on the Elevator and Ailerons.

Using very thin extensions wires from Heads up Rc
32 gauge and remove the black casing and just holding it with shrink tubing (less weight!!)

Placement of Receiver
All the way to the back of the Battery tray and sattelite receiver further back (6200, receiver)

Must do before first flight.

Add 5 minutes or gorilla glue to all carbon fiber motor mount rods.
go over the anti-rotating pings with thin ca; I would do it a couple of times.

add an extra screw on the tail wheel holding the rudder and don't forget to add medium ca to the tail wheel.


I'm using a 40mm spinner much better for cooling and looks.


I'm not using the wheel pants or the supplied wheels; using the MPI 2.5 wheels.

Please leave feedback that you have read this post.

about the SFG,
I started flying this plane since day one with the SFG but last week I took it off, to be honest I like it better without the SFG. I guess is matter of choice and flying style.

Happy Landings.


#7 TG43 Jul 22, 2010 11:52 PM

Hey Fred. What battery and prop do you like with that setup?

#8 Flazo Jul 23, 2010 08:14 AM

2200 mah 4cells with the APC 13x6.5...should be a rocket. Flying time about 5.30 and for me that is for than enough...this plane keeps me awake that's for sure.


here is the Lipo from HobbyKing

30C 4Cells Lipo


20C 4 Cells Lipo


#9 Flazo Jul 30, 2010 09:04 AM

Will be showing CG On extra 300...
it seems to be an issue for your flyers.


Crashed my Extra will be under repair by a professional... Yeap he is a flyer and a friend.


#10 Flazo Aug 10, 2010 10:44 AM

About Lipos,

Wanted to buy lipos from Hobby City but the price of shipping is embarrazing to look at. Well, Insted of getting 4 or 6 lipos I bought 2 Hyperian 4 cell 3300 mah for my new 57inch 3Dhobbyshop.


#11 Flazo Aug 25, 2010 03:44 PM

9 Attachment(s)
My Extra 300 EXP Repairs

#12 Flazo Oct 04, 2010 02:54 PM

My Extreme flight was re-maiden after the crash,

After a couple of flights, I didn't find anything wrong with the plane, it just flys like before. In other words depending on the crash the plane could be fixed.

RE-maiden, 10/17/10,

will have pictures from the NJ throwdown coming up next Sunday!

stay tune.


#13 Flazo Nov 01, 2010 08:26 AM

Extreme Flight does not sell spare fuse or motor box for the EXP Series.


UPdate, now they do! 04/14/2011

#14 Flazo Nov 01, 2010 08:27 AM

CG and the Hoppy People F-16

this mod or set up is not for a 3cell lipo, you can you read the manual provided with the kit. There are plenty of pictures to get the correct cg.

How to get the CG on 4cell lipo from 2200 - 2600mah.

After you have glue your ply re-inforcement, servos,wings, rudder, ESC-best location, tailarongs, place the Battery under the canopy and turn the JeT upside down

- you might need the help of a friend or other, and place the EDF unit with the motor AFT; and look for the CG.

With the stated process you should be able to find the cg.

The 4 cell setup and modifications is recommended for Pilots that have plenty of experience with Model Air-planes.

My current 4 cell setup is the Don's Wicked 4400kv with the pentium 60amps ESC and corona 939mg's.

good luck everyone.


#15 Flazo Nov 26, 2010 02:57 PM

If you are offended by any of my Blog Post please let me know, I will erase it...

I don't mean to down grade companies products with my unhappy results.


All times are GMT -5. The time now is 01:35 PM.