removing gorilla glue?
Ok, so I'm building a DUmas DH 89 Raphide, and I accidendtly glued most of the wing spars on one wing backwards...with gorilla glue...so from my reasearch I'm pretty much screwed.
DOes anyone have any war of removing the stuff without cutting or scraping? :confused:
(the spars are slotted in)
I don't know what would debond Gorilla Glue.
I would get a hobby saw blade to cut a tiny bit of the glue.
Then a wiggle should break the bond.
I like this razor saw blade
Careful, the blade is as sharp as a scalpel.
Don't know of any solvents that will dissolve it. Your only option is to cut it :(
|All times are GMT -5. The time now is 07:13 PM.|