| Apr 29, 2020 12:37 AM | ||
| ducpeter | you can direct connect to the S800 mainboard Z15 use 6S | |
| Apr 26, 2020 03:53 PM | ||
| johnny_00 |
Hi I resume this old thread because i need an info about a Dji S800 and a Zenmuse Z15N. The gimball z15 with a S800 needs 6S power. The stock s800 gimbal connection is only 14.8v. So i ask if i can connect the z15 directly to s800' s 6s lipo pack with a double connector. Please let me know Thank you Carlo |
|
| Aug 25, 2019 06:42 AM | ||
| ngates534 |
S800 Hi, I'm selling on a DJI S1000 if you'd be interested since I've upgraded. Thanks, N |
|
| Feb 01, 2019 02:56 PM | ||
| Keenan smith |
Im actually looking for as many S800evo as possible, im currently machining parts and upgrades to bring it right back in line with some of the more modern rigs and will run modded INav on F7 FC, new and improved motor mounts, and carbon fibre boom arms which adapt it to be able to run 17inch props which also drastically increase the payload and also increases flight times at normal payloads So guys hit me up as i want to purchase your rigs!!! Also will be selling upgrade parts |
|
| Jan 18, 2019 07:01 PM | ||
| shdwkeeper |
Quote:
|
|
| Oct 17, 2018 10:57 AM | ||
| mean_mike |
S1000+, A3, Guidance, Lightbridge 2 Hi I have a S1000+ with the A3 controller, Guidance, and Z15-5D. I am collecting data in an outdoor environment that tends to be cluttered with assorted stuff (buildings, trees, maybe parked vehicles, etc). I know the path that needs to be followed. I'd like to able to do this following waypoints and avoiding objects, but all the while, being within a certain minimal distance from each object. Can this be done just using the assistant or will I need to use the SDK? It sounds like the assistance for Guidance is no longer maintained, this does not give me a warm fuzzy regarding it. It also sounds like the assistant for A3 has been dumbed down (all according to dji forum posts), also not contributing to a warm fuzzy. Any inputs, suggestions, recommendations, links to online examples, etc, would be greatly appreciated. If it's believed that this should be it's own thread, I'd be glad to do that. Thanks... |
|
| Oct 12, 2018 01:30 PM | ||
| scubari |
Voltage Xxx |
|
| Oct 06, 2018 10:15 AM | ||
| scubari | xxxx | |
| Aug 13, 2018 05:34 PM | ||
| jabu32 |
Need some help pleeeease. Setting up a s900 with a pixhawk 2.1 and x8r. I got the pixhawk all setup and plugged the lipo in to test out. I tested the landing gear and they worked just fine. Everything seemed good. I went to arm and noticed only 4 of the 6 esc initialize. I think it was 1&4 or 1&5 that didn't arm. I gave some throttle and the 4 that were armed spun up briefly then shut off and wouldn't spin again. I noticed the lipo was a little warm and measured the cells which showed one dead cell. This was an older lipo so I just thought it went bad. I threw another on and it almost welded the connectors together. I measured the resistance of the input power connector and it showed a short. I checked each esc and it looks like motor 2 was the problem. What could have caused this? I checked everything and I didn't hook anything up backwards. Had this happened to anyone else? |
|
| Jan 29, 2018 07:10 PM | ||
| Mac176 |
Looking to fix-up an old DJI S800 / S800 EVO or need ZenMuse parts? True story, I bought out the remaining parts storage warehouse for the old DJI U.S. HQ that was here in Austin, TX. I have them up on ebay and for a way lower price than you will find anywhere. See my eBay store for other S800 and ZenMuse Z15 parts! http://stores.ebay.com/s800spareparts |
|
| Dec 17, 2017 10:43 PM | ||
| rickbrad |
Is it okay to mention I have some heavy lift motors for sale here? I have some Cobra CM4520/14-400Kv and some KDE 4215XF-465Kv motors. These can be packaged with or without ESCs. Anyone thinking of building a heavy lift AP rig will not find a better deal. https://www.rcgroups.com/forums/show...5XF-465-Motors |
|
| Oct 13, 2017 12:16 PM | ||
| Tahoe Ed | You are welcome. | |
| Oct 13, 2017 10:36 AM | ||
| Cuba59 | Thanks Ed | |
| Oct 12, 2017 01:35 PM | ||
| Tahoe Ed |
Quote:
Just do a search on the DJI website and the older models will come up. |
|
| Oct 12, 2017 12:13 PM | ||
| Cuba59 |
Older Software version from Wookong and A2 controller looking for some older DJI firmware from the Wookong and A2. I lost my laptop with all version on it. If someone can help and upload all version someone has to Google Drive/Wetransfer and send me the link to info@miamiaerial.com Thank You |
|
| This thread has more than 15 replies. Click here to review the whole thread. | ||
