New product: 1/5 Scale Corsair Decals

New product: Cessna L-19/O-1 Bird Dog instrument set in 1/4 scale and 1/5 scale

New product: 1/4 Scale Lewis Mk II Machine Gun. Available as a kit or ready made

Available now

Screen size: 40mm wide x 65mm tall

Power supply (not included): 3.7V - 6.0V

Heads Up Displays for RC Airplanes (2 min 40 sec)

Available in in 1/5 scale and 1/6 scale

Made for: Top Flite P-47 Thunderbolt

Available in gray, gold, or blue

http://www.iflytailies.com/store/decals/

1x1" TFLCD Economy R1 (0 min 49 sec)

This screen type varies the display every 3 seconds. The screen shuts automatically down after 5 minutes of use and may be power cycled to resume operation if desired. This display is nicely visible, even in outdoor light. Optimal visibility is achieved with high contrast content. The screen may be mounted to the back of an instrument panel with small dabs of silicone.

Each screen comes wired with a connector, which may be ganged together with the optional junction harness for as many displays off of one battery as desired.

Click here for more info

Back in stock!

Ready made version:
All items come assembled and painted. This set includes:
Instrument panel, gun sight, side panel controls, control stick, pedals, seat, harness. Side panel itsself available separately.
Total width of main instrument panel: 16.1cm / 6-3/8in.
Total height of main instrument panel: 8cm / 3-3/16in.

Fits among others: Meister Scale P-47 Thunderbolt; CARF-Models P-47 Thunderbolt (minor trimming on panel needed)


Kit version:
Includes: Instrument panel, gun sight, side panel controls, control stick, pedals, seat, harness.
The instrument panel and side panels come in kit form. Instrument panel:
Instruments come assembled. Panel comes painted and pre-cut and has been prepared for instruments. You only need to paint switches and glue instruments to the panel.
Side panel items: assembly and painting required.
Gun sight, control stick, pedals, seat, and harness come assembled and painted. Side panel itsself available separately.
Total width of main instrument panel: 16.1cm / 6-3/8in.
Total height of main instrument panel: 8cm / 3-3/16in.

Fits among others: Meister Scale P-47 Thunderbolt; CARF-Models P-47 Thunderbolt (minor trimming on panel needed)

http://www.iflytailies.com/

Includes press to talk button on top of stick (non-functional). Made from plastic. By adding a short screw or wooden dowel to the hole on the bottom you may mount this control stick in any position you want. Stick may be shortened a little after moving the rubber boot. This provides a very realistic appearance and unproblematic handling while upgrading or maintaining the cockpit area. Includes one stick. Comes fully assembled and painted.

Length: 100mm / 4in.

Weight: 5g / 0.17oz.

Available in 1/3 scale and 1/4 scale and 1/5 scale

Includes three decal sheets and one manual showing where decals go. These decals are waterslide and are available at:

http://www.iflytailies.com/store/decals/

This plastic panel with rivets comes painted

Length: 30cm / 11.8in.

Height: 20cm / 7.9in.

Thickness: 1mm

Available in 1/4 scale and 1/3 scale

This kit includes the basic instrument panel, a set of instruments, control elements, screws, drawings of the panel, and detailed instructions.

Total width: 13-1/8in. / 33.3cm

Total height: 7in. / 17.8cm

Instruments come assembled. Panel comes painted and pre-cut and has been prepared for instruments. You only need to paint the non-gray switches and glue instruments to the panel.

Fits the SIAI Marchetti SF-260 made by Composite ARF

Click to see more details

Available in 1/3 and 1/4 and 1/5 scale:

http://www.iflytailies.com/store/instruments/

Height: 22" / 56cm
Width at shoulder: 6" /15cm
Weight: 1 lbs 6 oz. / 620g

Available at: http://www.iflytailies.com/store/pil...-scale-pilots/