Posted by BMtech |
May 11, 2012 @ 08:05 PM | 2,821 Views
some mug holding my plane
this is a 1 off , I could supply cores & fuse if my arm was twisted
The hinge is kevlar in the lay up , from the outside its 3/4 vale,2oz tight weave glass kevlar hinge 6 oz carbon, 4oz glass & 2oz tight weave glass
the glass is cut out with a triangle file down to the kevlar, the top surface is cut through 3mm in front of the hinge line with a dremal diamond cutting blade by hand along a straight edge, then the top edge is sanded at a slight angle so it goes under the top skin , lots of work !!
still getting the rest of the pics together & a video when I have time