HobbyKing.com New Products Flash Sale
lmopar69's blog
Posted by lmopar69 | Feb 27, 2010 @ 06:29 PM | 14,923 Views
Guess who bought Hobby-Lobbys famous, candy dropping, air show flying, super huge 12 foot Telemaster at the "sidewalk sale" in today...

Laine.
Posted by lmopar69 | Feb 26, 2010 @ 02:19 PM | 13,823 Views
Since I took 2 weeks of leave before I go to Afghanistan for another year, I decided I should use the last few days before I go back to work to get some work done on my race car (truck).

Its a 1989 Dodge Ram 50. Originally it was a 4cyl automatic truck owned by a Midas Muffler shop in Newport News, VA. I bought it from them a few years ago for $100 and proceeded to remove the little 2.0 4 banger to make room for a Dodge 360 (V-8 of course).

I got the rear axle and frame cleaned up, and painted. I installed the new custom axle shafts from Dutchman, welded on my shock mounts, painted and installed the 4 link bars, mounted the 29"x18.5" Hoosier tires, and today, I finally got the mounts made for the truck bed.

I pushed it outside (no engine in it yet) and took a couple pictures. Soon it will be pushed back into the garage for a year long rest while Im gone (again).

Once I get back home, I'll have to get the roll cage put in, make the motor and trans mounts then get the engine and trans put in. After that its just wrapping up the little things so it can finally be driven.

Laine.
Posted by lmopar69 | Feb 23, 2010 @ 09:19 PM | 14,610 Views
We got home this morning from South Carolina. I probably gained 20lbs out there! But, on the other side of it, my wallet is WAY lighter after a week out there, so it all evens out.

Went and flew my 60" night flyer wing again tonight. This time on a 3S 2200 lipo (acctually lighter than the 2100 I was using). With the CG back where it should be, it flew MUCH better. Much more responsive, and rolls are much better too. Lots of fun to fly in the dark. Stops traffic too with 130 LED's in it. I weighed it finally this evening. Suprised, its only 18oz with the lipo and all. Not bad for a 60" plane that can still hit 60mph or so!

Laine.
Posted by lmopar69 | Feb 18, 2010 @ 09:52 PM | 13,830 Views
Hey guys, we made it out here, got all settled in our beautiful room on the 16th floor (top floor) of the resort. We spent yesterday doing not much. Today, we went to Ripleys Aquarium. REALLY cool place! We didnt do much else during the day, other than some shopping this morning and dinner at a super nice restraunt, Bonefish Grill here in town.

This evening, at around 8pm, I decided it was time to do a night flight on the beach. The wind was blocked by the two 16 story towers, so it wasnt bad at all! I flew for 15 to 20 minutes, then brought it in and did a nice approach to a hand catch. Once I caught it, there was a bunch of cheers and applause! Apparently about 30 to 40 people had come out to watch my 60" flying wing zing around the ocean front with 130 LED's glowing brightly. Made for a nice show for everyone, and I had a good time. So, if nothing else, at least I got one good flight in on the beach!

Next showing, 7:30pm (ish) tomorrow night! lol

Laine.
Posted by lmopar69 | Feb 15, 2010 @ 06:43 PM | 13,289 Views
Hey folks, just wanted to say, SEE YA! I am heading to Myrtle Beach for about a week. We will probably stay the night in Atlanta on Tuesday night,16 FEB, then Wed. we will be in Myrtle Beach.

Of course, those who know me will know, I dont go anywhere without at least ONE airplane! So, if anyone wants to come fly on the beach with me outside my resort room, shoot me an PM.

Laine.
Posted by lmopar69 | Feb 08, 2010 @ 11:28 PM | 13,072 Views
I just hate to let a plane sit around unbuilt when I have all the electronics just sitting here, even if I wont get to maiden it for a year or more. So, here she is, all ready to fly, with HS 225mg servos all around, Castle Creations Vertigo 1750kv outrunner, APC 9x6 prop, Castle Creations ICE 75 ESC, AR 500 RX, and a 4S 5000mah lipo.

I really like the look of this plane except for one thing. The fuse and the cowling. That square front just dosnt look like it belongs on this plane! The spinner on there helps quite a bit, but it still has kinda a funky look to it.

Oh well, now I just need to figure out where the heck it balances at. No rush though, it will still be sitting there when I get back from Afghanistan in a year or so.

Laine.
Posted by lmopar69 | Feb 02, 2010 @ 09:15 PM | 12,415 Views
So, I sold off a BUNCH of stuff in preperation to deploy to Afghanistan again. But, sometimes you see something you just CANT say no to! This is one of those cases. One of the RCG members had this 44" span Swallow Delta for sale for $60 shipped, and I just couldnt say no. Its supposed to use a .46 size glow motor, but who wants to slime up a plane!

Power for this one will be a brand new Castle Creations Vertigo 3424, 1800 kv outrunner and a Castle Creations ICE 75 ESC that I have had just sitting here for awhile now. How can you just let a bad aXX motor/ESC like that just sit there! Luckily for me, I still have one 4S 5000mah lipo left, so thats what I'll try first. Should be a mean plane on this power system!

So, I hinged this delta tonight, trimmed the canopy and put in the aileron servos. It still needs the rudder servo, landing gear and motor/esc mounted.

It wont take long to complete, but who knows when I'll get a chance to fly it. Heck, I still havent flown my 51" Bobcat that I built over a month ago. Im surprised I have had any time to build anything let alone get out and fly.

Laine.
Posted by lmopar69 | Jan 30, 2010 @ 11:20 PM | 11,906 Views
Ive had this 60" wing sitting around for quite awhile now. Originally it was a "lightweight" build with a slow outrunner just to toss around in the front yard. But, now, I decided to slap on a bunch of LED's and a different motor. Thanks to my buddy Bo for hookin me up with the LED's from one of his crashed planes. It looks like visability wont be a problem for this one.

Now to find the perfect power system to keep it in the low to mid speed range.

Laine.
Posted by lmopar69 | Jan 16, 2010 @ 08:55 PM | 12,300 Views
Well, I listed my 6' Telemaster for sale, but, no takers. So, this afternoon, I slapped an AXI on the nose with a 13x6 prop, a Castle ICE 60, Castle CC BEC and a 3S 6000 lipo. It balances out right in the middle of the recomended range. I charged up the brand new lipo and its ready to go tomorrow for its maiden flight (assuming the weather man is wrong).

A Telemaster is not really my kind of plane, but, heck, its 6 feet of brushless balsa flying through the air, what the heck! Strangely, this will be another "front yard" plane for me. Yeah, my front yard is bigger than most, but this one should get folks attention. It will be the biggest span plane I have flown here since all my other "big planes" are/were way to fast to get on the ground in my yard.

Im sure it will go smoothly.... Now, anyone want to buy a RTF 6' Telemaster???

Laine.
Posted by lmopar69 | Jan 11, 2010 @ 11:12 PM | 12,411 Views
Hey folks, yes, I have listed a TON of stuff for sale. But not to worry, it is for no reason other than, well, I dont want it all sitting here falling apart while Im gone for another year in Afghanistan. (Plus, some extra money never hurts). No, Im not getting out of flying AT ALL! Just shaving down the fleet and some "extra" stuff. Once I get back, I'll be on the war path buying up everything I can find again (as usual) to my wonderful wifes dismay.

So, with that said, spend some money and buy my planes and stuff guys!!!

Laine.
Posted by lmopar69 | Jan 10, 2010 @ 09:46 AM | 11,432 Views
I am finally back home from Colorado. DANG it was cold out there! We flew around in the mountains, did lots of power management training, lots of pinnacle landings, two wheel and one wheel landings etc... All in all, great training and lots of fun.

Now Im home, and its time to get ready for another year in Afghanistan. Part of that includes clearing out some hangar space. I hate to see my planes/motors/batteries sit in the trailer for a year. So, if you are reading this, look through my blog and if there is a plane you might be interrested in, make me an offer! Otherwise, I will eventually end up listing them for sale. Anything and everything CAN be sold.

Here is a quick list off the top of my head... all are electric, ready to fly and can even iclude RX and batteries if needed.

72" Pitts M12 biplane *SOLD*
*SOLD* Cedar Hobbies Bipe Stick *SOLD*
Ultra Stick 25E
H9 Super Stick .60
51" Bobcat
6 foot telemaster
RW Demon
OC Sledghammer *SOLD*
Bullit Delta
Zagi Tazz *SOLD*
Super Fly
*SOLD* GP Corsair (.46 nitro power) *SOLD*

Catch ya'll later! and here is a pic from out in Colorado.

Laine.
Posted by lmopar69 | Dec 30, 2009 @ 03:51 PM | 11,340 Views
Looks like I'll be flying a Blackhawk from Ft. Campbell again late this week. I'll be heading from Campbell, to St. Louis, MO, to Olathe, KS to Lincoln, NE, to North Platte, NE, to Denver, CO and on to Eagle CO. I'll be in Eagle for about a week or so doing some more high altitude flying. Should be a good time.

If you are near bye along the way, lemme know, you can come out and check out the aircraft at each of my stops.

Laine.
Posted by lmopar69 | Dec 14, 2009 @ 10:11 PM | 10,973 Views
Well, I found an awesome deal on a 6 foot Telemaster ARF one day when I stopped in at Hobby Lobbys Sidewalk Sale. Not my style of plane at all, but of course, I never pass up a great deal and I picked it up! In my spare time over the last two nights, I assembled it, put the servos linkages and RX in it. All Im waiting on now is my motor and ESC to get here.

This thing has to be the EASIEST ARF I have ever put together! Probably 4 hours total time in it right now. And trust me, I was in no hurry doing it. One thing that really stands out to me is just how light it feels! For a 6 foot span plane, this thing weighs nothing, but it sure feels strong.

Of course, I have to modify it slightly so it dosnt look like every other Telemaster out there. So, I slapped on some old worn out Traxxas Rustler wheels and tires that I had on my truck over in Afghanistan, I pulled off the HOBBY LOBBY TELEMASTER decals from the wing and fuse, and I will add some more color to it another time.

Anyway, who knows when I will get out and maiden this one and the Bobcat I just finished.

Laine.
Posted by lmopar69 | Dec 13, 2009 @ 01:11 PM | 10,712 Views
I decided that during the day time (on the weekends) I needed to get my butt to work on my REAL cars/trucks again. At night, I can work on the planes I want to get finished.

So, back to work on my drag car. Its an 89 Dodge Ram 50 pickup (smallest/lightest Dodge truck I could find). I cut the rear frame off, and added a Checkered Racing 4-link frame and 4-link setup. Along with the 4-link, I had a 8 3/4" Dodge rear end (from a 73 Challenger) cut down so I could fit a set of 29"x18.5" Hoosier Pro Street Radials under the bed. The Frame is 20" wide in the rear, the bed is 63" wide, so these big old tires just barely fit under it. Now I just need to order my axle shafts from Moser Engineering, and I'll have the rear suspension done. FINALLY. Then its on to insalling the roll cage.

For those interrested, power will come from a small block Dodge (360) For now its pretty mild with flat top pistons, stock heads, a 284 duration, 484 lift cam, Edelbrock intake/Carb and some shorty headers. Eventually it will be stroked to a 408 with aluminum heads on it. But, that will be down the road.

For now, I just want to get it "finished" and driving. Yes, it will be street driven also.

Laine.
Posted by lmopar69 | Dec 10, 2009 @ 06:59 PM | 10,777 Views
I figured it was time for another update on the 51" span Bobcat. I been workin on this thing for weeks! But, being an Army pilot kinda takes a lot of time, so it still has no prop on it and has not been maidened yet. I need a day off!

Thanks to my little buddy Kameron for sitting still with Hemi long enough for me to get a picture!

I put some HS 225mg servos on the elevator, some HS 81s on the rudders, some Scanner RC MG servos on the ailerons and a Scanner RC MG servo on the nose wheel. It has an AR 7000 RX in it, a Castle BEC Pro, a Castle Ice 75 and an AXI 4130 outrunner on the back. I would like to run 8S 4450s in it. I'll have to see what prop will work without overloading the motor/lipos or ESC. I may have to step down to 6S. Either way, it looks like it will be a lot of fun once I get it in the air.

Laine.
Posted by lmopar69 | Nov 23, 2009 @ 09:46 PM | 11,650 Views
Hey guys, Im lookin for some help here if possible. I have been tasked with organizing our fund raiser for our Battalion Christmas Party. 660 soldiers/aviators, plus their familys. They want me to do another "give-away" to help raise some money for our "Family Readiness Groups".

A give away is like a raffle, only with a different name. The Army dosnt allow "Raffles". I am trying to find "stuff" to give away! So far, I have a couple guys checking for some guitars, keyboards, some hunting gear, hobby type stuff, you name it.

I am looking for some beginner type RTF stuff to add to the mix. Something like a Super Cub, Easy Star, Blade CX heli, Traxxas trucks etc... Has to be new, has to be ok for someone who has never done RC so we can give it away. Or, if you have something else that would be a good addition to this give away, that would be great too. This stuff will be for soldiers, their kids, or thier spouses. And ALL the money we raise stays in our Battalion to help our soldiers and families.

So far, my LHS has promised me something... dont know what yet. Daisy has offered up 6 Red Ryder BB guns (3 normal and 3 pink ones) (Yes, Daisy sells PINK bb guns!!!). And Im waiting on some answers from a group of Realtors that want to get something to help us out.

Anyone have anything, know anyone who would be willing to donate something, or have an idea of who I can contact? Biggest problem right now is short notice. The party is the 2nd week of Dec.

Laine.
Posted by lmopar69 | Nov 15, 2009 @ 06:03 PM | 11,841 Views
Finally got a chance to snap a picture of some of my fleet together today. These are some of my favorite planes.

PS all of them except one are FOR SALE too! Gotta get ready for my next year tour in Afghanistan. The red/yellow plane with flames on it is NOT for sale. That is my baby!

Laine.
Posted by lmopar69 | Nov 08, 2009 @ 04:23 PM | 11,690 Views
What a great day! I went down to John C. Tune airport in Nashville, TN this morning and met up with Steve Johnson. Steve is the owner of an MX2 (serial number 009).

We took off from Rwy 20, headed NW out of the Nashville Class C area and it was off the hook from then on! Steve did rolls, loops, quban 8s, snap rolls, stall turns, knife edge and combinations of all of thee above. Full deflection aileron rolls are a blurr! The first one bounced my head off the canopy when he started, and when he stopped! AWESOME to say the least! That dude is an awesome pilot!

Then it was my turn! WOW is that thing responsive! Very similar to a Blackhawk acctually. So, I did some rolls and loops and general screwing around. Its surprising how my RC experience and helicopter flight time really make that stuff easy. Im sure my manuevers were not nearly as pretty as Steves, but over all I dont think they were bad. With a .93 to 1 trust to weight ratio in a 1200lbs airplane, that flies as smooth as that thing does, everything looks and feels "right"!

So, if you are ever wondering what to do late on a Sunday morning, find a guy with an MX2 and go for a flight!!!

You can see more pics and info about Steve and his plane at www.stuntplane.com

THANK YOU Steve!!!!

Laine.
Posted by lmopar69 | Nov 01, 2009 @ 07:55 PM | 13,936 Views
A couple hours ago I decided to get another ARF built this afternoon. I chose my new 51" span Bobcat from NeoPlanes.com. I would have to say, this was one of the easiest ARFs I have ever built! It took about 3 hours from pulling out of the box, to what you see here. Sure, there are no electronics in it yet, but, pretty much everything else is done.

Once my servos and brushless motor arrive, I'll have it all together and ready to go in no time.

Click on the "Comments" for this post and you can check out some more pictures and my "mini build thread".

Laine.
Posted by lmopar69 | Nov 01, 2009 @ 04:21 PM | 11,386 Views
Well, I figured out what plane to build today the easy way. I asked the wife. She is a HUGE fan of Gee Bees (she calls them Bee Gees cuz she's silly). Her favorite is the R1, but, I dont have one of those yet. So, I put this one together today. I'll install the electronics in a couple days if all goes right.

Now, lets see if I can get another ARF put together today. Might as well have the airframes ready for the electronics!

Laine.