HobbyKing.com New Products Flash Sale
booger's blog
Posted by booger | Jan 11, 2008 @ 09:43 PM | 4,715 Views
My heli fleet
Posted by booger | Sep 23, 2007 @ 12:53 AM | 3,509 Views
seagull edge 540 on 6s and tp 4130 8t
and the Mrs modeling it for me
Posted by booger | Aug 27, 2007 @ 10:10 PM | 3,912 Views
just an update went flying tonight with my 60 size voodoo
here's link to video
http://www.rcgroups.com/forums/showthread.php?t=734368
Posted by booger | May 24, 2007 @ 10:11 AM | 4,605 Views
My latest build
covered in yellow econokote
no gear (belly lander)
ultrafly c/13/33 motor
cobri box geared 3.3 to 1
apc 9x6 prop
jeti spin 22 esc
electron 6 receiver
2 3110 for elevator and rudder
hitec hs 65 on ailerons
auw with tp 2100
20.1 oz's
maiden this weekend
Posted by booger | Dec 21, 2006 @ 10:10 PM | 5,058 Views
I don't think I like the blue cockpit though may have to rethink that one. will probably install all the electronics in the next couple day's
Maiden to follow
Posted by booger | Dec 17, 2006 @ 06:40 PM | 5,297 Views
this build has been taking awhile. unusual shapes i guess. I think I got the turtledeck to large. but it's only gotta look close to scale as I am not a perfectionist. haven't decided on power system yet. or color scheme
Posted by booger | Nov 16, 2006 @ 07:54 PM | 5,310 Views
just an update on what i've been building and flying
Posted by booger | Oct 17, 2006 @ 11:46 AM | 5,600 Views
Well I decided to include some pics of my new build since brian showed some interest. this was pretty much a budget build as i bought most of the stuff. motor, esc, and servo's here on rcgroups out of the for sale ads. I tried to keep this plane as cheap as possible to keep the bills under the wife's radar. here's the pic's
Posted by booger | Oct 14, 2006 @ 12:01 AM | 6,637 Views
Well the Gws me-109 met an unfortunate end after the repaint. I was so proud of myself about the repaint I had to go fly it. Was beautiful day with no wind i had probably two circuits done on my field. when pow radio hit, I had it low coming across the field when bam heard motor power cut and hard roll left.blam hit terra firma at probably 40 mile an hour. So I wound up with a big pile of foam scattered 10 ft across the ground.

So I jumped into this build
Posted by booger | Oct 08, 2006 @ 03:00 PM | 5,670 Views
Well I finished the repainting of my me-109
setup is as follows
ultrafly c/13/28 motor
ultrafly gearbox geared 2.39 to 1
apc 8 x8e
cc ph 25
apex 2100 15c 3s
3 hs 55 for aer
Posted by booger | Oct 07, 2006 @ 10:27 AM | 5,733 Views
Just got my R3D, and it was all out a pretty simple build. Everything was included in the kit. Maiden was pretty uneventful. the only thing I'm having trouble with is getting the cg Right. No matter where I put the battery it wants to pull into a hover at over 1/4 throttle.
Setup is as follows
Axi 2212/26
cc ph 25
apc sf 10 x 5
tp 1320 3s batt
berg 4 receiver
2 futaba 3108 aileron's
2 4.3 grams forget what brand for elevator and rudder
weight without batt is 11 oz
Posted by booger | Sep 22, 2006 @ 11:28 PM | 6,221 Views
Well The pc-9 replacement is finished and maidened. I just love this plane. You can set it up many ways, and is bullet proof with some flying experience.
Okay so here's the setup I went with this time.

Ultrafly a/30/39 geared 3 to 1
Apc E 8 x 8
Castle thunderbird 18
tp 2100 gen 2
Electron 6
Hs-55 ailerons
Hs-55 elevator
No rudder
Covered the entire plane with econokote
Auw is 19.3 Ounces 545 grams

And to top it all off the plane whistles in a dive!!
Including some pics of the plane and maiden.
Needed only two clicks of right aileron
And the 3 clicks of down i put in before launch proved right on needed only little up for inverted.