New Products Flash Sale
dys123's blog View Details
Posted by dys123 | Aug 06, 2015 @ 05:22 AM | 1,280 Views
Hey,

New product to share with you all!

It is tiny power combo set for 160mm racing quad, perfect for DIY mini quad.

DYS BE1104 4000kv*4pcs
DYS mini 10A BLheli esc, special manufactured for BE1104 4000KV *4pcs
ABS3020 prop *3 pairs

BE1104 4000kv spec:
KV................................................ .................................................. ............4000
Stator Diameter.......................................... ..........................................14mm
Stator Length............................................ ..............................................12.5 mm
Shaft Diameter.......................................... .............................................1.5mm
Motor Dimensions(Dia.*Len).............................. .................Φ1412.5mm
Weight (g)............................................... .................................................. ..5.6g
No.of Cells(Lipo)....................................... ..............................................2-3S
Max Continuous current(A)........................................ ....................3.5A
Max Continuous Power(W).......................................... .................38.9W
Posted by dys123 | Aug 06, 2015 @ 03:14 AM | 1,107 Views
Hello, All,

We got a email inform that bought the motor from below ebay shop, the motor is under "DYS" brand, but When he installed it in his gimbal, he noticed very big play in bearing, that makes it almost
impossible to use:
https://www.dropbox.com/sh/o27ucmxog...m24FggnDa?dl=0

After checking the ebay link, we found they didn't put DYS logo on the description, also, the motor isn't with DYS logo, but they are using DYS motor drawing on the site.

Checked all details, the motor is fake, pls find the image for comparing.

The ebay shop link is as below:
http://www.ebay.co.uk/itm/BGM5208-20...item3a9fb4308a
Posted by dys123 | Jun 24, 2015 @ 08:59 PM | 1,137 Views
My mini quad, the DYS BE1806 motor is strongly recommend, Unlike EMAX motors, these motors dont come in fancy packaging. But they have plenty of clearance for mounting screws up to the windings, generously long motor leads with pre-soldered 2mm male bullets, uses the staggered 12mm and 16mm mounting patterns, offers two prop mounting solutions (traditional bolt on adapter and a T-motor style two screw option), and a color closer to orange than gold.
alrite ! i think i ned to put DYS 250 spec here.. check out !
For more information about this motor, check out the 250 mini quad parts list.
Spec from seller:
Brand: DYS
Item No: BE1806
Item name: 1806 2300KV Brushless Motor
Height: 0.85 inches (21.5mm)
Width: 0.90 inches (23mm)
Weight: 18 grams
RPM/V: 2300KV
Output shaft diameter: 2
Voltage: 2-3S
Battery: 2-3S lithium polymer
Max.current: 7.6A
Max.power: 84.4W
Mounting pattern: 2x 12mm and 2x 16mm
Motor mount hole size: M2
Also , they got different colors for the new version of BE1806
For me, these are really nice motors, if you are looking for 1806 motors, I dont see any need to to buy any of the more expensive alternatives unless you dont like the colour! It comes with quite long motor leads (for a 250 quad), you can easily shorten the supplied leads.
These are a great little motor and the motor leads are good quality silicon. On a 250 quad theyll reach comfortably to the cage keeping escs inboard.
Posted by dys123 | Jun 11, 2015 @ 05:59 AM | 3,559 Views
It is time to share the new item with you all.

The esc programmer is compatible with SimonK and BLHeli firmware, can work with SN series esc directly.

Size:54mmL*22mmW*9mmH
Weight: 8.0g
With the black plastic cover.

The retail price is only US$7.50/pc.

Welcome access DYS official site to know more products.
www.dys.hk
Posted by dys123 | May 25, 2015 @ 06:05 AM | 1,828 Views
Item: Summer

Controller: mini 32bit Alexmos Controller

Weight: 1790g ( not including the camera)

Total Weight: 4.74kg ( Including the package)

It is Play & Plug option, with low weight for this gimbal.

IMPORTANT: Camera size requirements: the maximum horizontal length between gravity and
Roll axis is 75mm; Width of camera is 147mm, height is 157mm as above picture shows.
While mounting camera, please keep the camera power off.
Posted by dys123 | May 25, 2015 @ 05:50 AM | 1,828 Views
Hey, Friends,

DYS released the mini 250 frame with BE1806 2300KV, and mini 20A esc with BLHeli firmware, CC3D and 5030 props, here is the images for your review and welcome to contact DYS to make the order, Due to DYS is manufacturer and provide all the goods to the distributor, so, you can contact with the dealers directly for the final product selling:
Posted by dys123 | Sep 04, 2014 @ 01:44 AM | 2,957 Views
Hey, Friends,

DYS will have new big gimbal with new contrustion to be releasing soon, share the drawing with you all first, appreciated your comments.

We will have stock for this new gimbal at the end of this month. And it can be pre-order from last week.
Posted by dys123 | Dec 18, 2013 @ 12:50 AM | 4,141 Views
Hello, Guys,

DYS just released a new 3 axis Gopro BL Gimbal, named "SMART", the specially on the mini 3 axis AlexMos controller board, it works with this gimbal perfect!

Named: 3 axis SMART Gopro BL Gimbal

Material: Aluminum Alloy & plastic parts

Top part: Glass fiber plate(2pcs)

Including:

Whole set Gimbal Frame

3pcs GM2210 Gimbal Motor

1 sets mini 3 axis AlexMos Controller Board

1pcs Color printed box

Not including the GOPRO camera

Total Weight: 362g (including packing box)

This option is PLAY & PLUG.

Suggested retail price: US$249.00/pc
Posted by dys123 | Oct 18, 2013 @ 12:06 AM | 4,772 Views
Good news to share with my dear friends, We, DYS will be released the DSLR Gimbals at the end of this month.

There are two versions, one is the handheld version, another is for the aerial photo version. These two gimbals with completed assembled and with whole set to sell, including the motor, controller board, no need to adjust.

Option 1:
DSLR BL Handled Gimbal with 3 axis AlexMos controller, including one BGM5208-180-12 not including the slip ring, two BGM5208-75 motor,total weight:1790g, made of aluminum alloy and real carbon fiber material.

Option 2:
DSLR BL Aerial Gimbal with 3 axis AlexMos Controller, including one BGM5208-180-12 not including the slip ring, two BGM5208-75 motor,total weight:1650g
made of aluminum alloy and real carbon fiber material.

Welcome to pre-order with DYS directly.

www.dys.hk
Posted by dys123 | Sep 27, 2013 @ 04:00 AM | 4,189 Views
Hi, Guys,

DYS just released a new brushless multicopter motor for the larger Octocopter, this motor with strong power as below datas, welcome to contact with DYS for further discuss.

Item no.: BE5208-330kv
Max current: 28.2A
Max Pull: 3300g
Max Power(W): 626.0
Lipo: 6S
Prop: 18x5.5(APC)
Posted by dys123 | Aug 08, 2013 @ 05:00 AM | 5,077 Views
The motor is coming soon, like a cake and with flat body, the especially, it is with stronger power than other motors.

It supports Mark2 or Mark 3, as well as the 5D camera, welcome to visit the website to know more about this gimbal motor.

Option A:
BGM5208-120(12P14N):
Hollow shaft: Ф7.0 out; Ф5.0 inner
Motor size: Ф63*24
Ri(Ω): 11.20

Option B:
BGM5208-80(22P24N):
Hollow shaft: Ф7.0 out; Ф5.0 inner
Motor size: Ф63*24
Ri(Ω): 10.20
Posted by dys123 | Aug 05, 2013 @ 01:25 AM | 80,494 Views
Good news to share with my all friends:

DYS upgraded the 2 axis NEX gimbal to 3 axis, just released 3 axis brushless gimbal for NEX camera, and we change the idea to make this one to 3 axis, then help the photographer have more direction selection during aerial photo.

Welcome to access: www.dys.hk

Below is the link of DYS 2 axis NEX gimbal:
http://v.youku.com/v_show/id_XNTk2Mj...rsttime=23.274


Some videos

DYS 2 Axis Gimbal flight test (3 min 7 sec)


DYS 3 Axis Brushless Gimbal for Nex Unboxing (7 min 21 sec)
...Continue Reading
Posted by dys123 | Jun 22, 2013 @ 01:10 AM | 8,683 Views
Hello, All,

DYS released another brushless gimbal for the SONY NEX, and it has huge stock now, please kindly check if you are interesting in it, and welcome to access the link to order: www.dys.hk

Item no.: BLG2SN

Without the brushless gimbal control board & Sony NEX camera

Material: Aluminum alloy & carbon fiber on the top

Camera: Support Sony NEX

Gimbal weight: 320g(not included motors)

Gimbal motor:

Item no.: BGM4108-130

Wire: 0.15

Ω Ri :17.0ohm

Weight: 93g
Posted by dys123 | May 10, 2013 @ 03:10 AM | 4,916 Views
Hello, Guys,

DYS released the new option with excellent design and more balance than other brushless gimbal. Also, the price is more attractive now!!!

Below are the datas for the new option:
Item no.: BLG2A

Without the brushless gimbal control board

Material: Aluminum alloy & carbon fiber on the top

Camera: Support GoPro Hero 2, Hero 3 and DYS CCHD camera

Gimbal weight: 140g(not included motors)

Gimbal motor:

Item no.: BGM2208-70

Wire: 0.15

Ω Ri :13.3ohm
Posted by dys123 | Apr 13, 2013 @ 12:23 AM | 6,109 Views
Hello, Guys,

How do you think this 2 Axis brushless gimbal? Would it is interested by you all? This gimbal with the perfect balance and good for aerial, welcome to contact with DYS for selling.

Material: Aluminum alloy & carbon fiber on the top

Camera: Support GoPro Hero 2, Hero 3 and DYS CCHD camera

Gimbal weight: 120g(not included motors)
Posted by dys123 | Apr 13, 2013 @ 12:16 AM | 6,028 Views
Hello, Guys,

DYS just released a new big gimbal motors what is supported for reflex camera(about 3.20KG), and the motor with excellent design and attractive price. Below are the data of the gimbal motors:

GM4114-100
Wire: 0.17mm
internal resistance: 15.2ohm
support the 3.20kg camera, special for reflex camera using.
Posted by dys123 | Mar 25, 2013 @ 01:34 AM | 4,823 Views
Good news to you all!

DYS will be released one brushless gimbal before March 30,2013, the below image is only the sample review:

Specification:
weight:150g (not included the weight of motors)
Material: aluminum and carbon fiber

The gimbal is suitable for gorpo, sony and DYS CCHD camera.
It can be adjusted as per your camera size

gimbal motor: DYS-BE2208-70, BE3608 & BE4108 gimbal motor

If you are interesting in these products, please access the below link:
www.dys.hk

Regards,
Yen
Posted by dys123 | Jan 09, 2013 @ 02:22 AM | 5,160 Views
Good news and share with you all!

We can provide the sample for test with half of price, but with limited the 10 fastest person and 1pc sample, please join in urgently!!!!

DYS is keeping releasing the BE series brushless motor, it develops and produces by DYS and with the excellent design and attractive price.

Most improtant that the BE series motor is with Kawasaki, Japan 1200 # 0.2mm high efficiency silicon steel and 40UH high temperature powerful magnet. Selected the Japanese NSK pure imported bearings to reduce motor vibration, shell using high-precision CNC machining and professional balancing test, making concentricity, balance is greatly enhanced.

Below is images of the BE4108:
Name: BE4108.jpg
Views: 207
Size: 144.5 KB
Description:

Name: IMG_1884.jpg
Views: 127
Size: 137.5 KB
Description:

...Continue Reading
Posted by dys123 | Dec 07, 2012 @ 02:30 AM | 5,467 Views
Hey, good news for RC hobbyist from DYS.

New Multi-Rotor Brushless Motor is coming from DYS, with high quality and excellent design!

The most important is the new motor with below good point!

Low vibration motor great for flying
-To make aircraft more stable
-Less operating noise
-More efficient
-Bearings long life
- With Kawasaki, Japan 1200 # 0.2mm high efficiency silicon steel
-40UH high temperature powerful magnet
Posted by dys123 | Nov 20, 2012 @ 05:16 AM | 5,092 Views
DYS developed a new product called super wide angle FPV camera,Small Volume,Light weight is suitable for aerial photography,Also good at in record at Car mode with High quality and very competitive price.

Name: CCHD camera.jpg
Views: 234
Size: 48.6 KB
Description: Features:
Resolution: 5 megapixel
Lens Type: Fixed Focus (2ft/.6m) glass
Aperture: f/2.8 (high performance in low-light situations)
Video Format H.264 compression, saved as Windows- & Mao-compatible MPEG4 (.mp4) file
Angle of View: 1600 ultra wid
Features:
Resolution: 5 megapixel
Lens Type: Fixed Focus (2ft/.6m) glass
Aperture: f/2.8 (high performance in low-light situations)
Video Format H.264 compression, saved as Windows- & Mao-compatible MPEG4 (.mp4) file
Angle of View: 1600 ultra wide angle in WVGA, 720p, or 960p mode, 127 0 wide angle in 1080p mode
Sensor Type: 112.5' HD CMOS, 2.2pm-sized pixels
Video modes: 1080p 30fps, 960p 30fps, 720pH 60fps, 720p 30fps, 480pH 60fps
Picture Modes: Single shot, photo every 3, 5, 10, 30 or 60 secs.; 3, 5,10photo/shot; self-timer
Motion Detection: 10sec recording/movement (application: house,office security; hunting)
Display screen: 2' High resolution screen (960x240dots)
Memeory Capacity: 1x 4-32GB Micro SD card
PC Connection: USB 2.0 (data connection and battery charaina)

The pic is taken by the mini CCHD camera w/high quality:
Name: picture taken by CCHD camera.jpg
Views: 218
Size: 293.2 KB
Description: The pic is taken by the mini CCHD camera with good quality

Below link is for the video:
http://v.youku.com/v_show/id_XNDY1MjY4ODIw.html

welcome to visit DYS website:
http:www.dys.hk