SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Belinda.Yun's blog
Archive for September, 2012
Posted by Belinda.Yun | Sep 19, 2012 @ 04:16 AM | 2,776 Views
Hi everyone, this is 8.0mm Bullet Connector with Cover. it can reach high current is 95A . also can connect with maximum wire 8awg silicone wire.



www.qiangshui168.com.cn
www.qsrccn-hobbies.com

Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 18, 2012 @ 07:07 AM | 2,918 Views
1.Protected to avoid shorting and reverse polarity

2.Can adapt up to 8AWG wires.

3. Suit for 65A-120A current application.

4. Metal connector size: 4.5mm



www.qiangshui168.com.cn
www.qsrccn-hobbies.com

Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 17, 2012 @ 07:51 AM | 3,529 Views
1. the design of golden plug:

(1) the arch shape of the plug make welding much easier

(2) the grooved end of plug can perfectly prevent the heat shrink from moving


2. the design of plastic part:

(1) the unique design of the curved ridges perfectly fit your finger, you will feel more comfortable when insert and pull out the plugs.

(2) the curved ridges look like a happy face, which coincide with the pursuit of hobby fun, happy life.



3. the advantage of operating procedure:

The golden plugs are embedded all-roundly in the Nylon housing. This can insure you high standard of stability and safety.


4. the structure of the Nylon housing

The channel between the twin banana plugs is big enough to let the air go through to bring away more heat.



www.qiangshui168.com.cn
www.qsrccn-hobbies.com

Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 14, 2012 @ 03:01 AM | 3,262 Views
1. it's bigger than XT60 connector.

2. Temperature Resistance : -30℃--240℃
Gold-plated Capacity:2U-2.5U
Electric Current:65A-120A
Weight:13.5g
Maximum Wire Connection: 8AWG




Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 13, 2012 @ 05:17 AM | 3,089 Views
This LED light bar is the perfect addition to your law enforcement or emergency scale vehicle. The dimensions are sized to fit perfectly on a 1/10 scale body. It features 16 total LED mounted on a chip board controlled by 2 momentary switches. One switch controls the 4 red and 4 blue LED on the front panel, while the other switch controls the 8 amber LED on the rear. The switches also provide the choice of 9 different flash modes allowing different strobing patterns and effects. This bar will be the perfect finish on any RC or scale model.


Specifications:

Length: 114mm
Width: 24mm
Height: 6.15mm
Wire Harness with Power Switch
2 Momentary switches
9 Flash modes
16 Total LED
4x Red
4x Blue
8x Amber
12volt D.C. Input


Package Includes:

16 LED light bar
Plastic Silver Housing
2 Momentary Switches
9volt battery clip
Mounting bolts, washers, and nuts
Heatshrink

*Clip connectors are pre-soldered
*The light will run on 3-12volts. Hook up a battery or power them directly from your receiver.
*LED brightness will depend on the voltage supplied.




Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 12, 2012 @ 07:41 AM | 3,028 Views
Ever drive in the darkness with your RC car? Try to hit a jump when the suns down? Pretty hard to see isnít it? Well light up the terrain with these awesome off road light buckets with 12 LEDs per bucket! These Off-Road Light buckets are bright! LED color options are blue, yellow, red, green, or white. They operate on 6 volts which makes installation a breeze. Hook them up to your receiver or use a 6 volt receiver battery. The light buckets can be opened if you should need to replace the LED or upgrade to even brighter ones. The light bucket also comes with 2 body clips to mount onto your body. Just drill holes. They are a direct swap on the HPI Baja 5B roll cages.

Specifications:
2x 12 hole LED light Bucket
2x Body Clip
2x 12 5mm LED board set
JR type connector





Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 11, 2012 @ 03:09 AM | 3,776 Views
Input Connector: Female JST main connector & Female 2S JST-XH balance connector
Output Connector: Male JST-PH
Wire Type: 24 AWG Silicone
Length: 1"

This small adapter cable allows you to use standard batteries with your Beast UMX or Blade 130X! On the input you'll find a standard red JST main connector and a 2S JST-XH balance connector. On the output you have a JST-PH connector to attach directly to your model or charger.





Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 10, 2012 @ 02:24 AM | 2,970 Views
Input Charge Connector: Male 4mm Banana Plug
Input Balance Connector: Male 2S JST-XH
Output Connector: 2S Female JST-PH
Wire Type: 24 AWG Silicone Charge Lead, 26 AWG Silicone Balance Lead
Current Rating: 8A
Length: 4"


This unique design serves as both a charging and balancing cable for up to 6 of your 2S battery packs. Connect to your batteries with the JST-PH connectors, as used in the Blade 130X, Beast UMX or Sbach 342 UMX. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector.
Posted by Belinda.Yun | Sep 08, 2012 @ 04:52 AM | 2,873 Views
The board is already wired in parallel, all you need to do is plug your batteries' charge and balance connectors to the board - ensuring that all the batteries are the same cell count. Each board can charge up to six batteries, from 2S up to 6S, at up to a 30A charge rate.


Specifications
Charge Input Connectors: Male Traxxas
Balance Input Connectors: Female JST-XH (2S-6S)
Charge Output Connector: Male 4mm Banana Plug
Balance Output Connector: Male JST-XH (6S)
Wire Type: 12 AWG Silicone
Wire Length: 8"
Board Dimensions: 140x68x17mm



Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 07, 2012 @ 08:28 AM | 2,229 Views
Main Connectors: (2) T-plug, (2) XT60, and (2) EC5
Balance Input Connectors: (4) JST-XH (2S-6S), (2) ThunderPower (2S-6S)
Charge Output Connector: Male 4mm Banana Plug
Balance Output Connector: Male JST-XH (6S)
Wire Type: 12 AWG Silicone
Wire Length: 8"
Board Dimensions: 140x68x17mm


This board features four sets of 2S through 6S JST-XH balance connections and two sets of 2S through 6S ThunderPower balance connections. For the main connections two T-plugs, two XT60s, and two EC5s are offered. Each board can charge up to six batteries, from 2S up to 6S, at up to a 30A charge rate.



Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 07, 2012 @ 08:26 AM | 2,109 Views
Board Input Connector: Female JST-XH, 2S-6S; Female ThunderPower, 2S-6S; Female PolyQuest, 2S-6S; Female Kokam, 2S-6S
Board Output Connector: Female 6S & 8S ThunderPower; Female 6S & 7S PolyQuest

The balance board to beat all others, this unique product will give you the ability to balance batteries with any kind of balance connector. From 2S to 6S, you can plug in JST-XH, ThunderPower, PolyQuest, even Kokam connectors.

On the output side it's just as inclusive, with ports to connect up to ThunderPower and Hyperion chargers as well as the iChargers and FMA's PowerLab models
Posted by Belinda.Yun | Sep 05, 2012 @ 06:15 AM | 2,347 Views
These adapters can be used to convert the JST plugged batteries into the UMX plug found on E-flite's UMX Beast, Sbach 342, Parkzone UM F-27Q & Stryker 180 to get longer flight times or merely increase your choice of batteries.

We have many other adapters and Rc accessories waiting for you to choose from, thanks!



Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 04, 2012 @ 08:09 AM | 2,620 Views
Input Charge Connector: Male 4mm Banana Plug
Input Balance Connector: Male 2S JST-XH
Output Connector: Female 2S JST-PH
Wire Type: 24 AWG Silicone Charge Lead, 26 AWG Silicone Balance Lead
Length: 4"

This unique design serves as both a charging and balancing cable for your 2S battery pack. Connect to your battery with the JST-PH connector, as used in the Blade 130X, Beast UMX or Sbach 342 UMX. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 4" of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

If you are interested to learn more, please free to contact me, thanks!


Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com