HobbyKing.com New Products Flash Sale
Belinda.Yun's blog
Posted by Belinda.Yun | Oct 18, 2013 @ 01:13 AM | 1,814 Views
Each wrench features a color-coded alloy handle and replaceable bit. The bits have a titanium nitride coating for additional durability. The set includes a 2.5mm, 2.0mm, 1.5mm,3.0mm wrenches.




Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Add: Shenxiang industrial zone Huaide administration district,Humen Town Dongguan City, Guangdong Province, China
Posted by Belinda.Yun | Oct 15, 2013 @ 03:21 AM | 1,723 Views
An audio/video cable for the GoPro HERO3 cameras using the USB Audio/Video live out port. On one side, a right angled USB connector linked to a super flexible servo cable, and on the other end an ImmersionRC/FatShark compatible plug. A total length of 8 inches (20cm), weighing only 4g

Not compatible with the HERO and HERO2 cameras.

Easily connects directly to your ImmersionRC and FatShark gear, and can charge the HERO3 battery from the power source!

Live video output quality varies between the various video modes and between the different versions of the HERO3 cameras. We've found that with the Silver version, the only mode that outputs smooth video with little delay is 720p/60. All other modes have noticable delay and low frame rate. We'll update with more information as we get more information for the White and Black version.

Charging/Powering function should only be used on transmitters with switching regulators, and requires airflow over transmitter to prevent over heating. Red wire should be cut and capped if your transmitter does not use a switch mode regulator.




Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Add: Shenxiang industrial zone Huaide administration district,Humen Town Dongguan City, Guangdong Province, China
Posted by Belinda.Yun | Jul 05, 2013 @ 02:00 AM | 1,664 Views
Hi everyone,

How are U ?

It has been such a long time not hear from you. hope everything is well with you .


Now No wire adapters is selling more popular, we have many styles for you to choose from, please visit our website for more. www.qiangshui168.com.cn


if you have any questions, please contact me, thanks!

Best regards,
Belinda



Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | May 22, 2013 @ 03:52 AM | 2,059 Views
Hi everyone,

How are you ?

recently we are producing new style lipo safe bag, please see attached picture. we can do different size and style.

If are interested to learn more, please feel free to contact me at belinda.yun@gmail.com

Thanks!


Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Mar 22, 2013 @ 02:59 AM | 2,905 Views
Hi everyone,

Long time no see! how are you ?

This is Belinda from QS company www.qiangshui168.com.cn

Here I want to introduce our lipo safety bag with different color.

and we have 3 sizes you can choose:

23*30CM

23*18CM

20*10CM

All MOQ is 300pcs, we can do with your logo on it.

If you have other requirements, please tell me. we can do for you .

Belinda
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Dec 28, 2012 @ 12:58 AM | 2,011 Views
Hi everyone,

Please see attached new introduction for our latest Safe 40A Paraboards.

If you have any questions, please feel free to contact me at :


Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Dec 03, 2012 @ 02:31 AM | 2,638 Views
This Micro PH3 Paraboard is designed for charging multiple small LiPo batteries safely. The circuit is protected with self-resettable fuses. They can prevent accident short of batteries during parallel charging.

Micro PH3 Paraboard has 6 sets of 3 pin JST-PH connectors. The type of connectors are used in batteries of E-Flite UMX series airplanes and Blade 130X heli. This parallel charging board with fuse guarantee the safety in fun.


Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Nov 30, 2012 @ 03:25 AM | 2,595 Views
This is our latest version of ParaBoard with self-resettable fuse protection. All balance ports are protected by sef-resettable fuse. And the main circuit is protected by common fuse which can be changed if damaged by accident.

Multiple the safe ParaBoards can be connected directly to charge more than four batteries at a time.

Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Nov 23, 2012 @ 08:26 PM | 2,420 Views
This micro paraboard is designed to charge multiple Micro Lipo batteries. The circuit is protected
by self-resettable fuse to prevent short of batteries during parallel charging.
Up to six micro batteries can be charged safely.
You can charge six micro batteries with Molex1.25( Micro JST) connectors at a time. Or to charge
six micro batteries with JST-PH connectors.. Besides, you can charge six micro batteries with
Molex1.5 and JST-PH together. But you need to make sure only one battery in a group.




Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Oct 23, 2012 @ 10:48 PM | 2,387 Views
Ever watch those 24 hr Le Mans Races where their brake rotors are glowing so bright under hard braking? The red hot glow from so much braking force is amazing! These LED lights replace the 12mm hex on your hubs and allow you to mount your wheels to them and mimic that effect. We offer them in Red, Green, Blue, and a color shifting one that changes from green, blue, and red. These lights operate dynamically. Which means once the wheel is spinning they come on. If they sit idle for a while they go off to conserve your battery life. Install them on your vehicle and enjoy the dazzling effect of these dynamic wheel lights.



Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Oct 16, 2012 @ 03:51 AM | 2,810 Views
Hi, this is 8mm bullet connector with cover, the bullet connector with housing on it will be more safer and neat to use. why not try it?


Housing Material: Nylon
Body: Brass
Spring: beryllium copper
Weight: 11.2g
Current: 120A-180A
Maximum temperature: 200 degrees


Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Oct 12, 2012 @ 03:13 AM | 2,740 Views
Specifications
Main Connectors: 12 AWG Silicone Wire Leads
Balance Input Connectors: Female JST-XH (2S-6S)
Charge Output Connector: Male 4mm Banana Plug
Balance Output Connector: Male JST-XH (6S)
Wire Type: 12 AWG Silicone
Wire Length: 8"
Board Dimensions: 140x68x17mm


The board is already wired in parallel, all you need to do is solder on your preferred main connectors, then plug your batteries' charge and balance connectors to the board - ensuring that all the batteries are the same cell count. Each board can charge up to six batteries, from 2S up to 6S, at up to a 30A charge rate.


Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Oct 09, 2012 @ 03:00 AM | 2,660 Views
1.End A:JST-XH 3S and BEC male
2.End B:PHR 1s*3
3.Cable:26AWG silicone wire
4.L=200mm


This adapter is used to charge three MCPX packs in series (must have three packs, will not charge individual packs). IT charges them as a three cell pack. Product has a JST plug with JST balance adapter.

Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 19, 2012 @ 03:16 AM | 2,659 Views
Hi everyone, this is 8.0mm Bullet Connector with Cover. it can reach high current is 95A . also can connect with maximum wire 8awg silicone wire.



www.qiangshui168.com.cn
www.qsrccn-hobbies.com

Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 18, 2012 @ 06:07 AM | 2,793 Views
1.Protected to avoid shorting and reverse polarity

2.Can adapt up to 8AWG wires.

3. Suit for 65A-120A current application.

4. Metal connector size: 4.5mm



www.qiangshui168.com.cn
www.qsrccn-hobbies.com

Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 17, 2012 @ 06:51 AM | 3,379 Views
1. the design of golden plug:

(1) the arch shape of the plug make welding much easier

(2) the grooved end of plug can perfectly prevent the heat shrink from moving


2. the design of plastic part:

(1) the unique design of the curved ridges perfectly fit your finger, you will feel more comfortable when insert and pull out the plugs.

(2) the curved ridges look like a happy face, which coincide with the pursuit of hobby fun, happy life.



3. the advantage of operating procedure:

The golden plugs are embedded all-roundly in the Nylon housing. This can insure you high standard of stability and safety.


4. the structure of the Nylon housing

The channel between the twin banana plugs is big enough to let the air go through to bring away more heat.



www.qiangshui168.com.cn
www.qsrccn-hobbies.com

Belinda
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 14, 2012 @ 02:01 AM | 3,127 Views
1. it's bigger than XT60 connector.

2. Temperature Resistance : -30℃--240℃
Gold-plated Capacity:2U-2.5U
Electric Current:65A-120A
Weight:13.5g
Maximum Wire Connection: 8AWG




Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 13, 2012 @ 04:17 AM | 2,959 Views
This LED light bar is the perfect addition to your law enforcement or emergency scale vehicle. The dimensions are sized to fit perfectly on a 1/10 scale body. It features 16 total LED mounted on a chip board controlled by 2 momentary switches. One switch controls the 4 red and 4 blue LED on the front panel, while the other switch controls the 8 amber LED on the rear. The switches also provide the choice of 9 different flash modes allowing different strobing patterns and effects. This bar will be the perfect finish on any RC or scale model.


Specifications:

Length: 114mm
Width: 24mm
Height: 6.15mm
Wire Harness with Power Switch
2 Momentary switches
9 Flash modes
16 Total LED
4x Red
4x Blue
8x Amber
12volt D.C. Input


Package Includes:

16 LED light bar
Plastic Silver Housing
2 Momentary Switches
9volt battery clip
Mounting bolts, washers, and nuts
Heatshrink

*Clip connectors are pre-soldered
*The light will run on 3-12volts. Hook up a battery or power them directly from your receiver.
*LED brightness will depend on the voltage supplied.




Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 12, 2012 @ 06:41 AM | 2,886 Views
Ever drive in the darkness with your RC car? Try to hit a jump when the suns down? Pretty hard to see isnít it? Well light up the terrain with these awesome off road light buckets with 12 LEDs per bucket! These Off-Road Light buckets are bright! LED color options are blue, yellow, red, green, or white. They operate on 6 volts which makes installation a breeze. Hook them up to your receiver or use a 6 volt receiver battery. The light buckets can be opened if you should need to replace the LED or upgrade to even brighter ones. The light bucket also comes with 2 body clips to mount onto your body. Just drill holes. They are a direct swap on the HPI Baja 5B roll cages.

Specifications:
2x 12 hole LED light Bucket
2x Body Clip
2x 12 5mm LED board set
JR type connector





Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com
Posted by Belinda.Yun | Sep 11, 2012 @ 02:09 AM | 3,577 Views
Input Connector: Female JST main connector & Female 2S JST-XH balance connector
Output Connector: Male JST-PH
Wire Type: 24 AWG Silicone
Length: 1"

This small adapter cable allows you to use standard batteries with your Beast UMX or Blade 130X! On the input you'll find a standard red JST main connector and a 2S JST-XH balance connector. On the output you have a JST-PH connector to attach directly to your model or charger.





Belinda
www.qiangshui168.com.cn
Phone: (86)13539879908
E-mail: belinda.yun@gmail.com
Skype: belindaqs
MSN: belinda.yun@live.com