What you will need from your local Home Depot or Lowe's. I used 3/4 inch PVC for my stand.
-3/4 inch PVC Caps-4
-3/4 inch PVC Cross Connector-2
-3/4 inch PVC 90 degree Elbows-4
-Frost King Tubular foam for cushion on the stand
-Enough 3/4 inch PVC to cut your parts below
- Bottom supports of the frame are 22.5 inches long. You will need two of them.
- X frame is four pieces of 7.5 inches pieces each connected together. So you will need eight 7.5 inch piecese for these.
****I would suggest not glueing in case you ever want to increase the size of the stand. On the one above I have had a 50 inch plane on it with no problem.****