Gaui X5 FES w/ uBeast Build, Mod, Repair log
Well here is the initial post for my Gaui X5 Build Log. I will update this post as well as the rest of this thread as i go.


Click Here To Subscribe to this thread!


Index:

#1 - Index (this post)

#2 - Arrival & Unboxing of Gaui X5 and spare parts

#3 - X5 Airframe, Frame Stiffener & motor mount

#4 - Tail Boom Assembly, installation and servo mounting

#5 - FES Rotor Head & Swash Installation

#6 - Electronics Prep work

#7 - Electroninics Install Pre-TM1000 burn out

#8 - Electronics after TM1000 burn out

#9 - Programming the Gaui/Hobbywing 100A ESC

#10 - Painting the Carbon Fiber tail fins

#11 - Test Hover & final check before full Maiden flight (Video)

#12 - Maiden flight and then some! (Flight Video)

#13 - Fusuno Knighthead Brace & 84.5mm KBDD Tail Blades

#14 - Flight #10 - Time to push my limits (Flight video)

#15 - 3D Flight #14 - Tick Tocks and Piros - 11-10-12 (Flight Video)

#16 - Reinstall of New TM1000 Telemetry Module

#17 - Flight Video Update 12-02-12

#18 - TM1000 Warranty request update

#19 - Gaui X5 - Replacing First bevel torque tube gear.

#20 - Flight Video Update 02-23-2013

#21 - Flight video Update 03-30-13

#22 - Gaui X5 FES Tail Wag Issues

#23 - Scorpion Backup Guard

#24 - Flight Video Update 04-22-13

#25 - X5 Action shots

#26 - ABEC 5 upgrade on tail box


My Youtube, Gaui X5 Playlist link:
http://www.youtube.com/playlist?list..._Sz8nHTeAdmhLV

My Youtube channel link:
http://www.youtube.com/user/IntegrityRC



The images and information found in this build log is that of my own experience. It should be used as a reference point only. You should check your work carefully and against other sources for accuracy. In other words do your own research. Also, you should always use proper safety procedures. I will not be responsible if you experience any damages or injury by following this information.