SMALL - Telemetry SMALL - Radio
Sawn Craft's blog View Details
Posted by Sawn Craft | Jan 15, 2015 @ 12:29 PM | 2,705 Views
We are extremely happy to announce the release of the fifth kit in our Micro Fighters series! This new model builds on the performance and construction techniques of its predecessors and that shines through in the air! Without further a due, I present the Sawn Craft Micro F4D/F-6 Skyray!



The model is CNC-cut out of extremely light and durable XPS foam and includes all carbon, laser-cut control horns, and hardware required to complete the build!

Just like all of our Micro Fighters, the Micro Skyray is designed to be powered by the standard 1S UMX-type power system that you will find in numerous BNF and RTF models such as the Hobbyzone Champ.

Designed to fly in an area the size of a single basketball court, you have the choice to build your Micro Skyray with either rudder and elevator controls or with elevons as both tails are included in the kit. Using the rudder/elevator controls will allow for added control at extremely low speeds and excels at high alpha flight while the elevon controls will provide a more sporty and aerobatic flying experience.

Sawn Craft Micro F4D Skyray Specs
  • Wingspan: 12"
  • AUW: 1.2oz / 34g
  • Lightweight and Durable XPS and Carbon Construction
  • R/E/T or Elevon Controls Included
  • Designed for common 1S UMX power systems
  • Simple build using tab & slot alignment
  • Full-color instruction manual included

We are also partnering with a well-known decal manufacturer to provide custom-sized graphics packages for this, and all of our other models so check in the coming weeks for those to become available on the website.

The Micro F4D Skyray kit is available now at Sawn-Craft.com!
Posted by Sawn Craft | Dec 21, 2014 @ 07:10 PM | 2,484 Views
Today I have a quick demo flight video to share with you of one of Sawn Craft's micro aircraft. The Micro Eurofighter is an extremely well-mannered model that is designed to utilize the "brick" and electronics from popular 1S "UMX"-type models. Take a look then head on over to Sawn-Craft.com to order one for yourself!

Sawn Craft Micro Eurofighter - Flight Demo (2 min 44 sec)

Posted by Sawn Craft | Nov 29, 2014 @ 06:20 PM | 2,224 Views
Here is a quick video highlighting some of the flight characteristics of the new Sawn Craft Mini Mana-Tee! Take a look, then head on over to Sawn-Craft.com to pick us one of your own for this indoor flying season!

Sawn Craft Mini Mana-Tee - Flight Video (2 min 41 sec)

Posted by Sawn Craft | Nov 04, 2014 @ 06:09 PM | 2,550 Views
Today we were able to upload the first in our series of build videos for all of Sawn Craft's products! Since we are very excited about our newest release, this first build video will take you step by step through every stage of building your new Sawn Craft Mini Mana-Tee!

Check out the video here then stop on by to Sawn-Craft.com to buy your own Mini Mana-Tee!

Use coupon code RCGroupsNov14 to save $10 on all orders over $50!

Sawn Craft Mini Mana Tee Build Video (1 hr 39 min 0 sec)

Posted by Sawn Craft | Oct 22, 2014 @ 09:53 PM | 2,817 Views
Hi there everyone!
We are very pleased to announce that we have completed the development and manufacture of the Sawn Craft Mini Mana-Tee and it is now available to purchase!
Don't be fooled by the name, this aircraft is more of a shark in combat flights! Perfect for small fields and indoor flying, the powerful motor combined with large control surfaces makes this an extremely capable model.

Specifications:
Wingspan: 18"
Length: 12.69"
Wing Area: 217.5in^2
Flying Weight: 3.125oz / 89g
Battery: 2S 300mAh LiPo
ESC: 6A Brushless
Motor: 10g to 16g Brushless Outrunner
Prop: 5"x3"
Servos: 2x 3.6g Micro

Check back here soon for the full build video!

Stop on by Sawn-Craft.com to order your own Mini Mana-Tee today and while you are there, check out our other fine micro and mini models!...Continue Reading
Posted by Sawn Craft | Sep 27, 2014 @ 09:19 PM | 2,846 Views
Well, we couldn't have asked for nicer weather today! There wasn't a cloud in the sky and though around noon-time the thermals brought some wind, for the most part the air was full of planes! There were some amazing WW1 and WW2 models being shown and flown!

I was able to get in a handful of flights on my Hangar 9 Sopwith Camel and Freewing SBD-5 Dauntless as well as my Micro F-22! Here is a video of one of our club pilots flying my Micro F-22:

Sawn Craft Micro F-22 (0 min 44 sec)


The attached photos show the list of generous sponsors that donated to the event raffle that all proceeds will benefit the Wounded Warrior Foundation. Today's raffle raised over $600 for the charity! The second photo is of just a small portion of the planes in attendance with the AT-6 Texan in the foreground that won Best In Show!

We'll be back tomorrow for what is forecast to be another perfect day for flying! Come join us if you are in the area! For more information about the event, visit www.NCRCC.org
Posted by Sawn Craft | Sep 24, 2014 @ 09:03 PM | 2,683 Views
This journey that we've been on over the past year, getting Sawn Craft up and running, has taught us quite a bit. Two weeks ago, though, I spoke with a gentleman on the phone that requested a product catalog. Hmm. At that point in time I had never even thought about putting together a print catalog of our products; why should we since we have a website? Well, we've worked to get the print document to ship to this gentleman and any others that request it.

I'm just very thankful that I've been able to work with some great customers that are willing to suggest things that they'd like to see! With any luck, we'll have many years to come of happy manufacturing and even happier customers just as long as we remember that the world still does appreciate the value of a print document and a hand-written letter!
Posted by Sawn Craft | Sep 20, 2014 @ 08:01 PM | 2,806 Views
We went to the Big Biplane Bash today in Farmington, CT. It was a good-sized event with probably 35 pilots and close to 100 multi-winged airplanes! It was a last minute decision to attend this one, but it will surely be on the calendar for next year!...Continue Reading
Posted by Sawn Craft | Sep 24, 2013 @ 12:02 PM | 3,656 Views
I have arranged some time so tonight I will be running some cutting tests on a Universal Laser 80w cutter!



I've used this machine to cut some test cuts last year, but this time I have a variety of materials, (DTFB, EPP, Depron, balsa, basswood, plywood, and poster board) and a truly scientific test method so the results should be repeatable for future production runs!

Stay tuned to find out more about the new projects that I'll be finishing up in the coming weeks!