I added rudders and changed the motor to a Turnigy Dst 1200. Great fun. here is the thread:
http://www.rcgroups.com/forums/showt...ghlight=funbat

Funbat 3D (3 min 4 sec)

After watching headlessagain`s Funbat videos I could not resist building one. It has 60 cm wingspan, Turnigy 2211/2300, 3s 800mah lipo and weighs 235g. A delight to fly.

Funbat (3 min 36 sec)

Here is a new video of my Mauersegler (swift):

Mauersegler bei Regen (2 min 15 sec)

Here is the second flight of my brother`s Funjet with extreme 6s setup. Some esc problems at the beginning. Had to relax a bit after the flight and I think I need stronger glasses.

Funjet ultra - ultraschnell (2 min 47 sec)

Here is my new Precision Aerobatics Katana MX. Excellent plane. 1450mm span, less than 2 kg weight.

Here is a video of my 80 cm Kfm4 Yak 54. It was windy but flying was fun.

Yak 54 (2 min 53 sec)

My latest build is a Yak 54 with 80cm span, Kfm 4 airfoil and several aerodynamic devices as vortex generators and fuselage fins.

First Racing session 2013 was short. You hear some depron breaking at the end of the video. The Bugatti survived, the Bearcat did not.

Bugatti 100 vs. Bearcat (1 min 19 sec)

My friend bruno makes this nice cnc Sbach shockflyer and I added Kfm 4 airfoil steps.

Sbach von Steinberg CNC (1 min 36 sec)

Got this one for testing and after some flights I fell in love with it.
Video quality is poor, sorry.

Visionaire von Parkzone (2 min 56 sec)

Here is a better quality video:
...Continue Reading

Bugatti 100 (1 min 48 sec)

I hate the thought that rc planes are killing people. And I hate the thought that drones are going to spy our life. This is a bad development.

After building the Bugatti 100, I think this is the most beautiful plane ever built. but there are many other most beautiful planes. What about Spitfire, Hunter, DH 88? Show us your favourites!

This is my latest build, a Bugatti 100. The original was intended to break the speed record in the 30`s but was never flown because of the war.
Model is 60cm span, Kfm 4 airfoil, 207 g, Turnigy 2211/2300 with Graupner 4,7x4,7 prop and 800 mah 3s lipo.
Maiden flight in heavy winds went surprisingly well. Looks great in the air.

A compilation of models with KFM airfoils flown last year:

Modelle mit Kline - Fogleman Profilen (4 min 7 sec)

Pteranodon, Scratchbuilt Kfm 2, 160cm, no plans
Capricorn clone, similar to davereaps heart models
Pup, information on my WW1 thread
F 18, Shumate plans
Mauersegler/Swift, free download plan, link below
My Brother`s Pak fa T 50, Rc Super Powers
Bussard, KFm3 scratch, , 130cm, no plans so far
Pterodactylus, 68cm, free download plan, link below
Radius 200, 40cm Kfm4, sketch below, download plan later this year
Bearcat, Zero and Mig 3, from the excellent SEMFF combat thread
radius 275, sketch above
Fledermaus/bat, Kfm 2, 80cm, no plans, picture on my blog, similar to pterodactylus
Martin Baker MB 3, inspired by Semff, plans later this year
My friend Bruno`s Gee Bee R3, Kfm2, unknown source.

Mick Reeves Spitfire built and flown by my father:

Spitfire RC-Modell Flug (2 min 4 sec)

My brother designed and built this small speed model for a Cox Teedee in the 80`s.
It did not fly for more than 20 years. I put a Turnigy 2211/2300 with a Graupner cam speed 4,75x4,75 prop at the front and a 3s 800 mah lipo inside.

mabu mini v-max (2 min 9 sec)

Here is my father`s new bearcat, Kfm 1 wing and full body fuselage. Flies great.

My brother built a funjet with an extreme 6s setup, following the advice on www.dauch.fr
We maidened it yesterday and hit 400 kph. There was about 30kph wind, so the plane went around 370.
Sorry for the bad quality video, the camcorder setup was wrong, but listen to the sound!

Funjet ultra 400 km/h (2 min 51 sec)

Dawn Patrol (0 min 38 sec)