This just came in yesterday and i am going out of town tomorrow so i hope to test all electronics today just to make sure there are no issues. Here are a couple of pics of the plane when i was just goofing around. Updated pics will be added to this post as they are available. Hopefully i can get some video of the maiden when i take it out.
I went a head and got the ARF over the KIT b/c it was only $35 more. Most of the guys, in the above mentioned thread, say that the motor is just fine but they recommend changing out the ESC. There seems to be some sort of communication error between BH and FMS. BH site says it should come with a 50a ESC whereas the manual says it should be a 65a. The guys that changed out the ESC got the 50a but for whatever reason i got the 65a so i am gonna stick with that. I also have a CC 10a BEC that i bought for another plane but never used, that will be getting used on this guy for security measures. i have a couple HS65mg servos sitting around as backups for my 70mm F-18, but i may take one and use it on the elevator on this thing before i ever fly it. I will have to take a closer look at the provided servo and see if i think it can handle the load. My biggest complaint with this plane so...Continue Reading