HobbyKing.com New Products Flash Sale
Hallmark's blog
Archive for February, 2012
Posted by Hallmark | Feb 20, 2012 @ 08:29 PM | 4,621 Views
It has finally arrived! After the courier company crushed the first one my supplier immediately despatched another and I picked it up yesterday. Wow, what a jet!

I plan on changing out the clevises, servos, fans, motors and ESCs because I hear the stock stuff is rubbish, but the parts will be put to good use in my son's jet when he saves enough for the airframe.

Anyway on with the build...

On close inspection I noticed the contact area where the cockpit meets the fuselage is not much in area at all. So rather than have the front end separate at 150kph or the first harder than expected landing, I decided to get some balsa and fashion a couple of wide spars to adhere against the intake walls and keep the front end nice and solid.

I got a piece 950mm x 75mm x 12.5 mm and using a scalpel and 100 grade sandpaper I formed a light but strong support pair that I think will provide the right amount of strength without adding to the front end weight much at all.

Here are some photos, please tell me what you think.

I have bought some carbon spars for the wings which came with nothing at all... Can anyone suggest the best way to place these? I'd like to avoid cutting the wing away, but any input would be greatly appreciated.

I'm off to buy wing and tail servos and metal clevises now so hope to read some feedback on my return.

You can view the jet and specs at this website. (Banana Hobby has it for US folks.)

http://sydneyrcjets.com.au/rc-edf-je...f-rc-jet-p-...Continue Reading
Posted by Hallmark | Feb 14, 2012 @ 06:28 PM | 2,188 Views
Hello again,

I have finished building my AXN and it looks great to me. I put a few customised details into it, some I borrowed from others (like Bruce at RC Model Review), and some I did for myself.

As I decided to use the servos from my crashed FMS Cesssna 182, but they had longer leads than usual so having to use the Y lead as well I ended up with some significant excess lead to stash. I think I did okay with that and still allowed good air flow to the ESC.

On that note I put a 30A cheapie ESC in it because I was told the stock ESC is rubbish and the other one cost me less than $10.

I am having one issue though, when I fire up the motor and get to about 2/3 power the motor vibrates quite violently until I increase power. Can anyone offer anything to explain/correct this? (Yes I fitted and glued the prop spacer.)

Here are a few pics of my first AXN. I'll maiden it today (I hope) and let you know how it went!
Posted by Hallmark | Feb 07, 2012 @ 10:18 AM | 2,451 Views
I ordered it and now can't wait to build it!
Posted by Hallmark | Feb 06, 2012 @ 08:26 AM | 4,185 Views
As I said in my last blog here is my new workbench. Yes it replaces the old one located in the kitchen (somewhere around the vicinity of the dining table), which my wife is very glad about and it folds away to almost nothing too so it has her all-round consent, which is not often available where the boy's toys are concerned!

In all seriousness though this is a great workbench. It is made of a tough and durable plastic and the aluminium legs are really well made too. Each of the halves has locking mechanisms on the cross bar and is secure enough to hold 130kg+, while the bottom shelf will hold 9kg. It folds down to 100mm (4") wide, so it will fit into the space between the washer and dryer quite nicely (as long as you put a cloth over it to protect it from the enamel on these machines).

There is a table rule on each side (metric and imperial) and the cut outs are great for placing those screwy items that like to wander off while not being used. The vice on the end has independent winding action for those quirky parts with weird angles, like the wings and there is a surprising amount of control on the winder so EPO isn't crushed or marked while being held firmly for wiring or taping over bumps and bruises. There are four plastic inserts that can be used to keep your project off the surface so if you're painting, wiring or just admiring this is a great platform to have with you.

This manufacturer has thought ahead for us too and made the units so they can...Continue Reading
Posted by Hallmark | Feb 06, 2012 @ 02:37 AM | 2,781 Views
G'day everyone, I'm Hallmark (aka Jayson) and I am here to benefit from the experience of all who care to participate. I recently decided to get back into the RC Plane game after many years away and I have made some significant investments. Please feel free to comment on the following and let me know of any matters that may help me out etc.

I bought a Phoenix Flight Sim with the Spektrum DX5e. I like both items and have enjoyed learning to fly (again) with this tool. I feared that the real deal would not be quite so forgiving and unfortunately I was correct.

I bought an FMS Cessna 182 and an AR600 Rx, built it and decided to fly on my birthday. That flight went very poorly to say the least. By the time I noticed the flap servos were mounted wrong and I had activated the flaps in flight, it was all over (save for the swearing ). So now I am taking a step back and buying a AXN Floater - I'll let you know if that maiden flight is any better...

My next acquisition was a Futaba 10CHG Tx with a R6208SB Rx unit. Although I bought this at the same time as all the other gear, it arrived a week or so later. I have only played with it on my Phoenix Sim and so far it is pretty nice. I hope to use this radio for a turbine that I will begin to build later this year, but in the interim I shall use it for whatever I can get in and fly. (On that topic; if anyone knows where I can get an F18 Super Hornet and/or F14 Tom Cat airframe suitable for turbine please post or PM me.)

I have also put the Aussie Anniversary FA/18e EDF from Model Flight on Lay-by and will use that as my first detailed build. Nothing like jumping into the deep end huh? I hope to show pictures in the next week or two (got to go slow or the wife will feed me to the dogs.)

That will do for now, more later on as I have a great workbench I want to show you all, I found it in Bunnings and it is great!