HobbyKing.com New Products Flash Sale
PAUL GRIMM's blog
Posted by PAUL GRIMM | Jun 10, 2013 @ 05:10 AM | 1,488 Views
Good morning someone can tell me how I could connect the PMU of NAZA V2 with a battery,and the battery with EzOSD current sensor
I thoughtfully parallel connection before the sensor
this is correct?
Thanks in advance for your reply.
Yours sincerely,
Thanks, Paul Grimm.
Posted by PAUL GRIMM | Oct 17, 2012 @ 02:13 AM | 1,780 Views
Hi


I use GoProH2 with TX58500 and FPV A10 glasses the image that reaches in my fpv goggles
it is in black and white not color image.
If I using the AV out from the goggles into a TV the image on TV it is color image.
I have try PAL and NTSC all so.
The color volume in A10 if it is in 20 or 10 is the same.
Can you help me?


All the best
thanks,

Paul..
Posted by PAUL GRIMM | Oct 07, 2012 @ 03:40 AM | 1,642 Views
Hello,

I use ImmersionRC.OSD and I m very happy with this product, but yesterday I gave power to my quadcopter with 1 x 3S battery
And I see in my fpv goggles voltage for 45 volt.
Maybe someone have this experience and can help me?

Thanks,
Posted by PAUL GRIMM | Jun 27, 2012 @ 11:14 AM | 2,086 Views
I use a transmitter futaba 10 CHG in an aircraft Quad-copter. The throttle is in reverse mode and would like to use IDLE DOWN and THR-CUT. The endpoints of the throttle are -100% to 100%. The only thing I so far failed trying to use IDLE DOWN and THR-CUT is to move the throttle from -100% to -140% what I'm doing wrong? How can I tack it and function normally from -100% to 40%? Also I can not use Throttle Stick as a regulator of RATE to IDLE DOWN and THR-CUT what needs to be do to operate it?

Thank you in advance.
Paul Grimm.
Posted by PAUL GRIMM | Mar 22, 2012 @ 06:26 AM | 2,167 Views
hi.
I have a GAUI 500X with 4 18A ESC GAUI the one 18A ESC GAUI overheat is the one on the motor number one is the one by far of hot of the other three ESC.
Do you know someone tell me what this might mean?

Thanks..
Posted by PAUL GRIMM | Mar 02, 2012 @ 11:07 AM | 1,990 Views
How I can use the head tracking system with futaba 10 chg?
Posted by PAUL GRIMM | Jan 18, 2012 @ 10:11 AM | 2,087 Views
Futaba 10chg setting i gaui 500 x with gu 344
Posted by PAUL GRIMM | Dec 01, 2011 @ 02:06 PM | 2,437 Views
One more question please.
How can I do Reset on the beginning the GU-344 Gyro

Paul,
Posted by PAUL GRIMM | Nov 27, 2011 @ 02:57 AM | 2,526 Views
hi,
Please help me if you can.

a) How can I connect a camera canon IXUS 980 IS with a transmitter FPV-FEVER TR5800D2 5.8G/200mW what wires I need?

b) How can I connect a camera Toshiba Camileo S10 with a transmitter FPV-FEVER TR5800D2 5.8G/200mW what wires I need?

Thanks,
Posted by PAUL GRIMM | Oct 14, 2011 @ 04:26 PM | 2,561 Views
Hallo!!
I returned to modeling after 25 years I bought a helicopter Walkera V450D01
I started training…And find it very difficult!
Maybe you can help my with a problem that I presented today.
While until yesterday could turn the main blade by my hand in the right
direction kinate freely without the motor and could not do the same with
opposite now in both directions if you try to move with the hand
my main blade is in direct relation to the motor!
The helicopter can fly but what does this mean that presented to my helicopter?
How did they may cause a problem is probably in a gear or on the motor or ESC?
What must I do?
Thanks in advance,