Posted by Troy | Aug 28, 2008 @ 01:32 AM | 12,650 Views
Posted by Troy | Aug 12, 2008 @ 12:43 AM | 13,154 Views
Posted by Troy | Jul 16, 2008 @ 01:28 AM | 12,984 Views
Posted by Troy | May 05, 2008 @ 11:31 PM | 14,724 Views
Posted by Troy | Aug 13, 2007 @ 12:12 AM | 12,379 Views
Posted by Troy | Jul 26, 2007 @ 01:06 AM | 26,269 Views
Here is the print orientated on the wing. The checker lines were initially drawn with a pencil and then I went back with a black Sharpie marker.
I laid a piece of masking tape over the lines and then traced the 'jagged' line with a sharp razor. I'll be going back later to add more tear marks with different shades of gray.
Here I have cut away the Orange areas with a pair of scissors. I did this off of the foam to protect the Depron. The eye patches were also cut out and I have lightly sprayed the back with spray-adhesive so they stick just enough.
Here I have sprayed the Orange paint. The checkers and right wing half were covered with some scrap cardboard. There is a fade to white towards the trailing edge on left wing. The right wing I lightly built up the color to soften the edges.
Close up of my mask.
Started the flat part of the fuse that blends into the horizontal stab. Same technique as wing. Covered the checkers and did a fade on the TE of the elevators.
You can see the eye patches pulled off. The tiger picture is for reference when I start to add the stripes. The beer is to cool off the artist because it is hot and muggy in San Diego right now.
Here I have jumped ahead a bit with the black Sharpie making the line details. I just keep the top of the printed pic over the painted area and flip it back to make the black lines/details. Flipping the drawing up and down, I work my way around.
Posted by Troy | Jul 19, 2007 @ 01:27 AM | 7,774 Views
Posted by Troy | Jul 10, 2007 @ 12:41 PM | 5,818 Views
Posted by Troy | Jun 01, 2007 @ 01:48 PM | 6,319 Views
Posted by Troy | Apr 24, 2007 @ 03:07 PM | 6,236 Views
Posted by Troy | Apr 17, 2007 @ 04:20 PM | 6,489 Views
Posted by Troy | Apr 09, 2007 @ 01:00 AM | 10,731 Views