HobbyKing.com New Products Flash Sale
rclipobattery's blog
Sticky: Imax4b6
Posted by rclipobattery | Oct 01, 2011 @ 04:28 AM | 2,191 Views
IMAX4B6
Input: DC 11 to 15V
Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0
Charger power: 50Watts, current is regulated accordingly.
Discharger power: 5 watts, current is regulated accordingly
Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V)
Current drain for balancing Lithoum: 300mA
Charge termination: automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process
Packing:
1 x charger
1 x pair alligator clips for Pb battery
1 x alligator to bullet connector cable
1 x JST to bullet connector cable
1 x Futaba to bullet connector cable
1 x Tamiya to bullet connector cable
1 x bullet connector with wire
1 x TP/FP adaptor
1 x XH adaptor
1 x instruction manual
Sticky: Imaxb610ac
Posted by rclipobattery | Oct 01, 2011 @ 04:24 AM | 2,159 Views
IMAXB610AC

Charge current:0.1 to 10.0A

Discharge current:0.1 to 5.0A

No. of cycleS:1 to 5 times

Battery data memories:up to 10 data per battery-type

Dimensions 143*119*36.5mm

Net weight470g
Sticky: Imaxb6ac+
Posted by rclipobattery | Oct 01, 2011 @ 04:17 AM | 2,140 Views
IMAXB6AC+

Dual input: AC/DC

Charge/discharge POWER: 50W/5W

Charge current range :0.1-5.0A

Discharge current range:0.1-1.0A

1-6 CELLS LI-LON /LI-PO /LI-FE

1-15CELLS NI-MH/NI-CD /2-20V PB

Built-in Adaptor
Posted by rclipobattery | Oct 01, 2011 @ 04:04 AM | 2,223 Views
IMAXB6AC

Dual input: AC/DC

Charge/discharge POWER: 50W/5W

1-6 CELLS LI-LON /LI-PO /LI-FE/

1-15CELLS NI-MH/NI-CD /2-20V PB

Charge/discharge Current: 5A/1A

Built-in Adaptor
Posted by rclipobattery | Oct 01, 2011 @ 03:47 AM | 2,274 Views
IMAX B6

DC11V-18V

Charge/discharge POWER: 50W/5W

1-6 CELLS LI-LON /LI-PO /LI-FE

1-15CELLS NI-MH/NI-CD/2-20V PB

Charge/discharge Current: 5A/1A
Attachment 4317486
Net weight 442g

Dimensions 133*87*33mm