New Products Flash Sale
Jerm357's blog View Details
Posted by Jerm357 | Sep 25, 2015 @ 08:14 PM | 2,136 Views
I finally have my Blade 150 all built and ready to go after a few delays from BG. This is just going to be a LOS quad for now and I still need to install some lights for night flying, but I think it turned out pretty good. Some day I hope to get some FPV goggles and really have some fun with it.

Diatone CF Blade 150
Eachine 1104 motors
Eachine 3020 props
CC3D OpenPilot
Align 18awg JST connecter
Lemon Feather Light RX- No Pin
Nanotech 3s 450mah 65c batteries

The build so far is about 85g and 125g with the Nanotech 3s 450mah 65c battery. The batteries weigh 40g and I'm getting about 6.5min before any of the cells hit 3.5v. After 5.5min's of normal flying the cells are all right around 3.75v each after resting. The DYS 10a ESC's are working great with the 1104 motors using just the stock settings, and produce a lot of speed on this build. I really could not be any happier about how it flies.

...Continue Reading
Posted by Jerm357 | Feb 18, 2015 @ 10:58 PM | 3,937 Views
I just finished my first Brushless Quad and it turned out great. All the parts came from Banggood except for the batteries and receiver.

Diatone FPV250 frame
DYS 1806 BE 2300kv motors
Emax Simonk Series 12A ESC's
CC3D flight controller
CC3D PDB with led switches
Gemfan 5045 / 6045 props
Lemon DSM2 6ch receiver
Nanotech 1300mah 45c batteries
Mobius ActionCam C2 lens
Devo 7E

...Continue Reading
Posted by Jerm357 | Apr 16, 2014 @ 01:41 PM | 2,878 Views