Espritmodel.com Telemetry Radio
ParkzoneFan's blog
Posted by ParkzoneFan | Dec 24, 2012 @ 08:04 PM | 1,828 Views
Have the parts now.

Turnigy 480L V-Spec Inrunner w/ Impeller 2150kv
http://www.hobbyking.com/hobbyking/s...er_2150kv.html


GForce 30C 2650mAh 4S 14.8V LiPO
http://www.valuehobby.com/power-syst...8v-lipo-1.html

Might need bigger ESC though.

I am getting very tempted to cut out the firewall and make a slide in Motor / Battery / ESC tray. would give access for 36mm motors also.

I saw one other Pylon plane like this. I could add a little length to the nose with this if nessary also to remove the ounce of lead there.

Have not even flown it yet and want to change it.??

there might be room for a 2650 maH 5s battery which may solve my tail heavy problems.
maybe I should just look for a heavier 28 mm in runner.

If I do not re kit the plane I should put a deserving paint job on it later.

CSD Vortex CC (0 min 0 sec)

Posted by ParkzoneFan | Dec 21, 2012 @ 09:59 AM | 1,634 Views
Blue Cor and With Balsa tail feathers.
12 ounces Air frame weight so far.

Planning on starting with about 300 watts 1500kv. 1800 mah 3s

flys nice. will try to get video when it warms up

Vortex Arrow (0 min 0 sec)