HobbyKing.com New Products Flash Sale
Adidas4275's blog
Archive for June, 2012
Posted by Adidas4275 | Jun 29, 2012 @ 12:28 AM | 2,997 Views
Flying in the Backyard of the Morningstar Ranch. Lighting Hit Tree, Bird Flying, Creek Following (0 min 49 sec)



little wobbly, new firmware on the HoverFly Gimbal and it needs to be tuned

i was a complete moron and left my Patch antenna on the table when i left and so I had to fly LOS rather than FPV

i wanted to do some slow circles around the tree..... but that was not going to happen flying LOS at 300' away

anyways tomorrow ill have another chance!
Posted by Adidas4275 | Jun 28, 2012 @ 05:02 PM | 2,509 Views
Morningstar Ranch Front Yard Aerial Video, Sprinklers and Driveway (2 min 24 sec)


fairly calm weather.... just seeing how the Nex-5n would do in dusk conditions and trying to fly down the sprinkler lines
Posted by Adidas4275 | Jun 24, 2012 @ 04:23 PM | 2,573 Views
okay newest (an I think the best) shot that I had to capture the ranch and some fishing. I think 1 or 2 of these shots will be perfect for a 2-3min feature on the ranch when i am done.

Aerial Video of Fly Fishing and Horses at the Morningstar Ranch (4 min 32 sec)


so much nicer to fly in calm weather
Posted by Adidas4275 | Jun 23, 2012 @ 01:21 AM | 2,974 Views
Following the Creek out back of the Ranch in 30mph Winds (2 min 41 sec)


flying over the creek at the ranch in 20-30 mph winds!

it was fun flying!
Posted by Adidas4275 | Jun 21, 2012 @ 02:37 PM | 2,352 Views
We are staying in Wy for a couple weeks and I brought a plane and some multirotors..

first day here and I got some good shots of a tractor

anyways, here are a couple quick shots
Aerial Video of Disking the Round Pen Wyoming 2012 (1 min 6 sec)

Posted by Adidas4275 | Jun 18, 2012 @ 02:56 PM | 2,650 Views
so i will post the progression of tuning that I am going through with Askman's AG-550n gimbal and the HoverFly Gimbal Controller

First Test Flight:
New HoverFly Gimbal Controller Flight Test with Sony Nex-5n 16mm AG-550n Gimbal (2 min 32 sec)


after I lowed the roll accelaration down to 5 (from 1500 )

also this test was done with the Gimbal Controller stuck on the gimbal with Zeal Gyro Tape ( i noticed the rig was slow to respond in roll)

Second Flight
...Continue Reading
Posted by Adidas4275 | Jun 17, 2012 @ 03:44 PM | 2,511 Views
So I have an HDMI converter but the weight is an issue..... and the mini-HDMI connector is in a bad spot on my gimbals... so i am sure i will use it, but i have deceded to try out using a CCD mounted on the hot shoe with a cold shoe adapter from Amazon for the Nex-5n.

mounted it with 3M double stick tape, the a zip tie around and then after I coated the whole thing in plastidip

(pictures dont show the pastidip yet)

I have found that 2.6mm lens is almost exactly what the 16mm pancake's FOV is
Posted by Adidas4275 | Jun 17, 2012 @ 04:37 AM | 2,517 Views
So tonight i wired up a LC filter for FPV gear to get rid of servo lines or motor lines in video shared with the flight pack for my "shimp" multirotor

also wired up a voltage regulator that will be able to take the 14.8v from the 4s and drop it down to 12v for my video gear on that same shrimp (that way i can keep it simple and light and only need one battery)


still need to adjust the Vreg and then add some heatshrink.... but its late so that will wait for tomorrow
Posted by Adidas4275 | Jun 11, 2012 @ 04:47 PM | 2,454 Views
Askman's new Y6 flying gimbal frame

build log will be located here:
http://www.rcgroups.com/forums/showt...2#post21868691




...Continue Reading
Posted by Adidas4275 | Jun 11, 2012 @ 04:16 PM | 2,473 Views
Just finished the build up (well at least 90% of it)
Build Log Thread
http://www.rcgroups.com/forums/showt...2#post21868390



some nice pictures:



...Continue Reading
Posted by Adidas4275 | Jun 04, 2012 @ 12:31 AM | 2,500 Views
It was a calm day so i decided to try the WKM gimbal outputs...

these are some of the best clips and some needed a little post help!

AG0555n Gimbal Test with DJI Wookong M WKM gimbal control Hexacoper Sony Nex-5n (2 min 25 sec)