HobbyKing.com New Products Flash Sale
FWAL's blog
Archive for February, 2012
Posted by FWAL | Feb 25, 2012 @ 01:49 PM | 2,296 Views
Yep I'm using balsa and resin! boring.......
But cheap, strong and made for idiots
Posted by FWAL | Feb 22, 2012 @ 12:27 PM | 2,389 Views
I didn't count how many planks there are in total but it was a lot
Posted by FWAL | Feb 19, 2012 @ 02:57 PM | 2,118 Views
I shot this video last Summer at my local slope, when I say local it's only six miles away so I'm pretty lucky. The music is also by a local band who went to the same Comp school as myself. Not sure if they're still together now!
Rehab vs P15 (4 min 18 sec)

Posted by FWAL | Feb 19, 2012 @ 02:51 PM | 2,158 Views
In my hangar I only have one foamy which is a 60" SAS Wildthing and one mouldie fused ex JP Pretty now called P15 as I have ditched the spinning thing and motor at the front. The rest are all blasa with either built up wings or foam core wings. Pictured below are a Chris Foss 66" Phase 6 and my own design Rehab with a 58" Epler 374 built up wing profile.
Posted by FWAL | Feb 19, 2012 @ 12:07 PM | 2,374 Views
Here's a video of my IOM Lintel, my son and his friend were driving and filming, I did the editing.
Music by Groove Armada
Lintel (3 min 7 sec)

Posted by FWAL | Feb 18, 2012 @ 10:42 AM | 2,064 Views
This afternoon I cut some balsa sheet into 5mm (.20") strips and started planking. Unlike Primer where I did the planking in a couple of hours using Cyno. I'm using aliphatic glue and intend to take my time, with full intention of being able to finish the hull with 200g/m2 fibre glass and West System resin. So hopefully no filling and painting!
Posted by FWAL | Feb 17, 2012 @ 04:56 PM | 2,438 Views
A video shot last year at my local slope, both are homebrew designs around 60" span
Music by; Ocean Colour Scene
A bag of bits (3 min 20 sec)

Posted by FWAL | Feb 17, 2012 @ 04:43 PM | 2,334 Views
Primer's first taste of water, 5th Jan 2012, B Rig, Llareggub Lake
Music by; The Chemical Brothers
Primer IOM maiden (3 min 4 sec)

Posted by FWAL | Feb 17, 2012 @ 04:31 PM | 2,252 Views
So far it's been a busy building season.
In November 2011 I started my first scratch build, homebrew IOM 'Primer' which I finished early Jan. Then I drew up and started another IOM 'VMG' and also a 45" aerobatic homebrew slope soarer