Discussion /
Posted by Harry H /
Dec 01, 2012 @ 07:54 PM / 3,214 Views /
19 Comments
(
1 2 )
/ Reply
1 2 )
/ Reply
So here is my latest. BH Models Westland Wyvern. I will be adding photos as I complete it. Pretty good quality ARF but bashing it as I go along.
Wingspan 89" - Should be around 24 - 25lbs
Rimfire 65cc, Castle 160 ESC
6S 8000 Turnigy Nanos x 2 for 12S
Spekturm AR12120 Power Safe RX, TM1000 telemetry, air speed sensor
Taildragger RC A123 2500 x 2
Zinger 4 blade - 22 x 10
Robart gear
Enjoy,
...Continue Reading
Wingspan 89" - Should be around 24 - 25lbs
Rimfire 65cc, Castle 160 ESC
6S 8000 Turnigy Nanos x 2 for 12S
Spekturm AR12120 Power Safe RX, TM1000 telemetry, air speed sensor
Taildragger RC A123 2500 x 2
Zinger 4 blade - 22 x 10
Robart gear
Enjoy,
...Continue Reading
Another one of my planes, an H9 Sopwith Camel. This is a great flyer once you get the hang of ground handling. As long as you take off and land directly into the wind there is no problem - cross winds can be nasty. It is equipped with a Monster Power 60, CC Ice 100, CC 20amp BEC, Spek AR 7000 and TM 1000 telemetry - and a bunch of lead. To get the CG right, hole was cut through the firewall for the battery. Too bad this model has been discontinued.
...Continue Reading
...Continue Reading
Not really a build log but have altered from the original ARF. Have had this plane for about a year and a half with over 150 flights on it. This is a great plane if you like scale and would almost call it a trainer. Here are some shots and alterations I have made over time. 
Harry
* In flight photos by...Continue Reading

Harry
* In flight photos by...Continue Reading
I don't blog but thought I'd give it a go. So here is my latest endeavor, a charging station made with a couple of used server power supplies. Turned out really well and am able to use all my Hyperion charger has to offer with this new setup.
Got a couple of Paraboards from EP Buddy. Could not be happier
...Continue Reading
Got a couple of Paraboards from EP Buddy. Could not be happier
...Continue Reading

