HobbyKing.com New Products Flash Sale
SoaringDude's blog
Archive for January, 2011
Posted by SoaringDude | Jan 18, 2011 @ 02:12 PM | 7,746 Views
To all those asking, here's how I mounted the HD Hero camera on my non-powered gliders. Many HD Hero owners use the clear plastic case that comes with the camera but I decided to go for best video quality (it's an HD camera after all) and minimum drag by mounting the camera "naked." I got the basic idea from a post on RC Groups.

Basically, the mount is a piece of 1/16" aluminum that bolts to the top of the wing using longer wing bolts. I have different pairs of wing bolt holes drilled so the same bracket works with both my gliders. The camera is secured using zip ties. Holes are drilled allowing the camera to be attached facing front, back, left, and right: you get to pick one direction per flight .

Several important details: first, drill the wing bolt bracket holes so you center the camera weight over your plane's CG. This will minimize trimming changes. FWIW, even with the CG unchanged I still needed lots of up trim with the camera on board. Next, you want to protect your glider from the metal mount with foam. Pic 4 shows how I used thicker foam in the center and thinner foam on the mount "extensions." Pic 3 shows the cut channels in the foam to allow for the zip ties. Next, you will need to use longer wing bolts. On both my gliders it took an extra 10mm of bolt length to do the trick.

Finally, but of critical importance, it is HIGHLY advised that you use short wing bolt spacers between the camera bracket and the wing bolt holes in the...Continue Reading