Just started modifying my 2 meter Fling for ailerons, Flaps and, if I can find one, to fit motor.

So far I have stripped the covering from the wing and sawed through it at the polyhederal joints. There are two ribs at each joint nest time I will use razor saw to cut down on sanding.

Have it all programmed will maiden soon.
Airtronics RD6000
Flaps, Crow, aileron on throttle ..no reflex
rudder coupled 50%
elevator coupled flaps 20% down

After maiden probably will dump crow and try to get ailerons to camber with flaps