SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Donaldsneffe's blog
Posted by Donaldsneffe | Oct 24, 2012 @ 06:03 PM | 4,146 Views
Turnigy Plush 10 A, BL Heli 8.0 flashed, HK 5A Tail ESC BL Heli v.2.2., power for board and tail ESC from BEC of main ESC, Turnigy 1220 IR main motor, 8t pinion, Hawk RC 12000 kv tail motor, RRC/Plantraco Prop.
8200 rpm, more power than Spin 16300 mCP x, perfect (PERFECT) tail performance, AstroidDesigns carbon cage, base plate, boom struts, Frank Lachmund landing skids, old (cut) Xtreme canopy, UMX/130x plugs, custom Turnigy 300 35-70c 2s batteries, Rhino 360 2s, Wellpower 350.
Flight time 3 min with Turnigy, 3 1/2 with the others.
Flight performance awsome.





...Continue Reading
Posted by Donaldsneffe | Oct 22, 2012 @ 01:35 PM | 3,978 Views
Tareq - dont fly like a ....

(People who know the Smacktalk RC episode with Tareq Alsaadi and Bert Kammerer in the Swiss mountains, Tareq testing the new Goblin for the first time, know what I mean ).

mCP x canopy by Frank Lachmund:






Posted by Donaldsneffe | Oct 20, 2012 @ 08:03 PM | 4,116 Views
Canopies and TDR landing skids by Frank Lachmund.
TDR 29.8 g, Logo XXtreme 30 g.





...Continue Reading
Posted by Donaldsneffe | Jan 30, 2012 @ 02:38 PM | 5,911 Views
Tail ESC modified Walkera ESC be SSkaug.
Tail motor: Tiny Hextronik 2 g; Plantraco prop.
Main motor: Tiny HP03s, XP-3A ESC, custom converter by 4712.
Main motor is quite weak, and standard battieries (Eflite) do not work; Turnigy 300 work, but bad, Wellpower 250 and MiniAviation 300 are better, Wellpower 320 again better, but not really good. Hyperion 550 too heavy for main motor.

Tail works and holds perfectly! Perfect work by SSkaug.
No wagging, no blowing out at all!

Anyway, will have to use another main motor - HP03s works perfectly with stock tail-motor and KBDD/SP 100 tail, but seems to be too weak for this setup.

Weight of double BL as shown: 42 g.
< 40 g would be possible quite easy: using stock canopy, stock skids, removing 0.5 mm copper wire (for brushed tail), changing heavy Walkera full metal tail motor mount and CFK fin.





...Continue Reading
Posted by Donaldsneffe | Jan 28, 2012 @ 07:03 PM | 5,716 Views
Baby-TDR style by Frank Lachmund.




From left to right: TurboAce 91416, Twin-Tailmotors (Bravo SX), KBDD tail blades; Spin 16300 kv, SR120/Plantraco tail; C05M, 4g3/Xtwin tail, HP03s, stock tail with Solo Pro 100 3D rotor.



...Continue Reading
Posted by Donaldsneffe | Dec 22, 2011 @ 02:44 PM | 7,057 Views
New tail fin made of aluminium/plastic/aluminium (sandwich) by Frank Lachmund (canopy, landing skids also by F.L.). Much more durable than CF tail fins.











...Continue Reading
Posted by Donaldsneffe | Nov 14, 2011 @ 02:06 AM | 9,695 Views
Only some pics - will update with more info and mods.







...Continue Reading
Posted by Donaldsneffe | Oct 10, 2011 @ 08:22 AM | 7,121 Views
New style - Batman probably would like it...






...Continue Reading
Posted by Donaldsneffe | Sep 22, 2011 @ 07:51 AM | 7,053 Views
Little stronger than original ones. Made from 0.7 mm CF.

Left side: Original (broken, fixed with Epoxy - too weak), center and right custom made ones:


Posted by Donaldsneffe | Sep 22, 2011 @ 07:46 AM | 8,263 Views
Some pics of my BL mCP x.
It is an intermediate version and flies very well.
Rakonheli frame, TurboAce 91416 14000 kv Inrunner main motor, 8 tooth pinion, XP-7A ESC, "old" TheSteves converter soldered to the backside-board spot, double coreless tailmotor (2 x Nine Eagles Bravo SX motors, Solo Pro rotors) with mounts and tail fin from Astroid-Designs - both versions, inline and over/under.
This main motor will be set in a stock mCP x frame soon (when the broken board will have been repaired), and the RKH-frame mCP x will get a C05M motor with 1 mm shaft (already waiting for being installed).
The double coreless tail motor is extremely good, tail holds very well, even better than with Walkera UFO8 motor and Silverlit Xtwin rotor.





...Continue Reading
Posted by Donaldsneffe | Jul 26, 2011 @ 08:45 AM | 7,973 Views
I did it - it works, it flies
It is quite loud and the Bravo SX main motor is too weak for good performance, unfortunately. Its exactly 35 g without batteries - probably a little too heavy for the small main motor.
Work is not finished yet...





...Continue Reading
Posted by Donaldsneffe | May 03, 2011 @ 05:23 PM | 8,195 Views
My Solo Pro fleet:



Revell Hot Shot: out of box; Solo Pro V2: o.o.b., Solo Pro I (canopy): Xtreme landing skids, swashplate and rotor head (new version), Bravo SX main and tail motor (SP tail boom); Soar: Xtreme metal rotor head (old version), Solo Pro V1: Xtreme landing skids without battery cage - rubber ring for mounting Zippy 240, Hyperion 240, Wellpower 250, Xtreme metall swashplate and flybar (heavy weights), Bravo SX black main blades.
Posted by Donaldsneffe | Apr 25, 2011 @ 05:27 AM | 10,830 Views
MIA S300 - Nine Eagles Bravo SX / Solo Pro mod






This MIA S300 heli with Nine Eagles Bravo SX parts flies fantastic. It easier to handle, more stable, much better in turns, and faster than the (very well flying) NE Bravo SX (and by far better than all my Solo Pros). Additionally the S300 is much more silent than the (very lound) Bravo SX, even the Solo Pro is much louder.
I have several fixed pitch helis (several Solo Pros with different mods, several Bravo SX, CB100, 4#3B), the S300 is my favorite one. It is the best flyer of all, the by far best „lander“, and it looks quite nice.
I have built this heli in December 2010. The MIA kit is easy to assemble, to fit the Bravo SX main frame needs a bit of surgery – the tail boom bracket of a second main frame has to be cut out and glued into the frame for the MIA heli, if the MIA tail boom is used.
I have reported these mods already in December in this and a German forum. But since the pictures of those posts are not available any more (server died) and I have been asked several times fort he MIA S300 Bravo SX, now again a report.


This report is dedicated to frieslander, who "forced" me to write my own blog!



Required:


From MIA microflight (http://www.micro-flight.com/):

• „MIA S300 Scale Frame Kit - mSR, mCX, Solo“ (US$ 19.99)
• „MIA S300 Scale Canopy Kit“ (US$ 9.99)
Shipment is cheaper, if you ask Sylvia from MIA – I paid only US$ 8.50 to Austria (Europe).

• A Nine Eagles Bravo SX (
...Continue Reading