HobbyKing.com New Products Flash Sale
fitecrc's blog
Posted by fitecrc | May 22, 2014 @ 03:06 AM | 1,846 Views
FT-SCServo is meaning that Smart Control Servo was R&D and manufactured by FEETECH.
Feetech T-SCServo 15kg Smart Control Servo Be Controlled By Arduino

SCServo can work at servo mode and wheel mode.
The servo mode can be used to multi-joints robot since the robots can be controlled with specific angles. (The factory default settingis servo mode)
The wheel mode can be used to wheel-type operation robots since motors of the robots spin infinitely. (If wheel mode is available you need to program the value of position limitation the both are 0.)
If you want to reprogram servo, you need to download the PC software (SCServo_Debug), and to connect SCPC-2(Serial Control Programming Card) between servo and PC.
More about SCServo_Debug and SCPC-2 introduce please reference its instructions.

SCServo has a unique ID number to identify on BUS network.
The range from 0 to 253 (0xFD) can be used (The factory default settingis ID 1), and, especially, 254(0xFE) is used as the Broadcast ID. If the Broadcast ID is used to transmit Instruction Packet, we can command to all SCServo.
After programmed servo ID, to be best way is written it on the sticker of servo. If not, maybe you will forget the ID when you programmed many servos.

SCServo have kinds of baud rate available.
The baud rate from 38400 bps to 1M bps can be used.
They are 38400, 57600,76800,115200,128000,250000,500000,1000000. (The factory default setting is 1000000 bps)
Feetech T-SCServo 15kg Smart Control...Continue Reading
New Product / Posted by fitecrc / Sep 07, 2013 @ 01:23 AM / 2,157 Views / 0 Comments / Reply
This entry is temporarily hidden while fitecrc edits it.
New Product / Posted by fitecrc / Sep 07, 2013 @ 01:19 AM / 2,114 Views / 0 Comments / Reply
This entry is temporarily hidden while fitecrc edits it.
Posted by fitecrc | Sep 06, 2013 @ 11:40 PM | 2,147 Views
Report 2013 The 10th Shanghai International Model Exhibition Feetech Servo

2013 The 10th Shanghai International Model Exhibition had finished succeed in.in our booth,we had show our lasest servo,brushless servo,programmable servo.


Many visitors to experience how to program our servos,the high speed,high torque and so on.

hereby attached some pictures.
Posted by fitecrc | Mar 27, 2013 @ 01:30 AM | 2,640 Views
Feetech Micro 0.1sec/60degree 1.5kg.cm Digital Servo FT2312M
SKU:FT2312M

Dimensions:23.2 × 12.3 × 25.6 mm

Weight:14 g

Operating Speed :0.12sec/60degree (4.8V)0.10sec/60degree (6V)

Stall Torque :1.2kg.cm/16.69oz.in(4.8V)1.5kg.cm/20.87oz.in(6V)

Operating Voltage :4.8V~6V

Control System igital

Direction :CW

Operating Angle :120degree

Required Pulse :900us-2100us

Bearing Type :1BB

Gear Type :Metal

Motor Type :Carbon

Connector Wire Length :20 cm
Posted by fitecrc | Mar 27, 2013 @ 01:23 AM | 2,656 Views
Feetech Micro 0.07sec/60degree 3.5kg.cm Digital Servo FT2331M
SKU:FT2331M

Dimensions:23.2 × 12.1 × 26.5 mm

Weight:20 g

Operating Speed :0.09sec/60degree (4.8V)0sec/60degree (6V)

Stall Torque :3kg.cm/41.74oz.in(4.8V)3.5kg.cm/48.69oz.in(6V)

Operating Voltage :4.8V~6V

Control System igital

Direction :CCW

Operating Angle :120degree

Required Pulse :900us-2100us

Bearing Type :2BB

Gear Type :Metal

Motor Type :Coreless

Connector Wire Length :20 cm
Posted by fitecrc | Mar 27, 2013 @ 01:05 AM | 2,599 Views
Dimensions:35.2 × 15.2 × 29.5 mm

Weight:29 g

Operating Speed :0.11sec/60degree (4.8V)0.09sec/60degree (6V)

Stall Torque :2.2kg.cm/30.61oz.in(4.8V)2.6kg.cm/36.17oz.in(6V)

Operating Voltage :4.8V~6V

Control System igital

Direction :CCW

Operating Angle :120degree

Required Pulse :900us-2100us

Bearing Type :2BB

Gear Type :Metal

Motor Type :Coreless

Connector Wire Length :20 cm
Posted by fitecrc | Mar 19, 2013 @ 04:58 AM | 2,397 Views
Dimensions:35.2 × 15.2 × 29.5 mm

Weight:29 g

Operating Speed :0.08sec/60degree (4.8V)
0.05sec/60degree (6V)

Stall Torque :2.1kg.cm/29.21oz.in(4.8V)
2.3kg.cm/32oz.in(6V)

Operating Voltage :4.8V~6V

Control System igital

Direction :CCW

Operating Angle :120degree

Required Pulse :900us-2100us

Bearing Type :2BB

Gear Type :Metal

Motor Type :Coreless

Connector Wire Length :20 cm
Posted by fitecrc | Mar 19, 2013 @ 04:51 AM | 2,235 Views
Dimensions:40 × 20 × 37.8 mm

Weight:73 g

Operating Speed :0.17sec/60degree (6V)
0.15sec/60degree (7.4V)

Stall Torque :18.9kg.cm/262.9oz.in(6V)
21.3kg.cm/296.3oz.in(7.4V)

Operating Voltage :6V~7.4V

Control System igital

Direction :CW

Operating Angle :180degree

Required Pulse :500us-2500us

Bearing Type :2BB

Gear Type :Metal

Motor Type :Coreless

Connector Wire Length :30 cm

Servo programmable function
1. FAIL SAFE, On or Off
2. Direction of Rotation
3. Travel Speed
4. Servo Max Torque limit, and Punch
5. Center, End, and FAIL SAFE Point
6. Signal Pulse Set-Up
7. Stretch (Holding Power, Running Power, Acceleration and Deceleration)
8. Dead Band Width
9. Resolution Setup
10.“Save and Open” File Options
11. Reset Factory Default Data
12.Read and Write Servo Data
Posted by fitecrc | Mar 19, 2013 @ 04:43 AM | 2,497 Views
Dimensions:

40.2 × 20 × 38.6 mm

Weight:56 g

Operating Speed :0.16sec/60degree (7.4V)
0.14sec/60degree (8.4V)

Stall Torque :17.8kg.cm/247.2oz.in(7.4V)
21kg.cm/191.7oz.in(8.4V)

Operating Voltage :6V~8.4V

Control System igital

Direction :CW

Operating Angle :180degree

Required Pulse :500us-2500us

Bearing Type :2BB

Gear Type :Metal

Motor Type :Coreless

Connector Wire Length :30 cm

Servo programmable function
1. FAIL SAFE, On or Off
2. Direction of Rotation
3. Travel Speed
4. Servo Max Torque limit, and Punch
5. Center, End, and FAIL SAFE Point
6. Signal Pulse Set-Up
7. Stretch (Holding Power, Running Power, Acceleration and Deceleration)
8. Dead Band Width
9. Resolution Setup
10.“Save and Open” File Options
11. Reset Factory Default Data
12.Read and Write Servo Data
Posted by fitecrc | Sep 27, 2012 @ 03:50 AM | 2,888 Views
Features
-The brand new programmable servo of FEETECH, can be online upgraded via computer, it is adjustable of parameters specification, to make you enjoy the servo high performance.
-Standard digital Titanium gears servo、2BB
-Coreless motor、Aluminium middle hull
-Waterproof
-Operating Voltage: 2-cell Li-Po power
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm

1. FAIL SAFE, On or Off
2. Direction of Rotation
3. Travel Speed
4. Servo Max Torque limit, and Punch
5. Center, End, and FAIL SAFE Point
6. Signal Pulse Set-Up
7. Stretch (Holding Power, Running Power, Acceleration and Deceleration)
8. Dead Band Width
9. Resolution Setup
10.“Save and Open” File Options
11. Reset Factory Default Data
12.Read and Write Servo Data

Product Details
Power:7.4-8.4V
Speed: 0.13sec/60degree(7.4V); 0.11sec/60degree(8.4V)
Torque: 12.1kg.cm/168.0 oz.in; 14.5kg.cm/201.4oz.in
Weight: 56g(1.41oz)
Size: 40.2*20.0*38.6mm
Application: Air plane&Car&Boat&Robot

Item Packing
-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW: 90g
Posted by fitecrc | Aug 24, 2012 @ 08:53 PM | 3,660 Views
High Quality Fitec Half Size Metal servo Arm,hot.
(blue,black,Titanium,red,orange)

23T Half Size Metal Servo Arm for SANWA servo,
24T Half Size Metal Servo Arm for hitec servo.

25T Half Size Metal Servo Arm For RC Futaba、savox、Xcore、HL、HSP、Fitec servo Go tech
Posted by fitecrc | Aug 23, 2012 @ 08:27 PM | 4,036 Views
2012 Shanghai International Model Exhibition will be held ,We warmly invite you to Our Booth number: 231. H3

Date: August 28-30, 2012

Address:Guozhan Rd.No.1099,Pudong District,Shanghai, China
Welcome to Shenzhen FEETECH RC!


Visitors,please contact Cherry, email:info.fitec@gmail.com +86 755 89335266
Posted by fitecrc | Aug 12, 2012 @ 09:10 PM | 3,023 Views
Fitec FS5679M Low profile HV high-speed digital servo for 1/10 EP/GP Car
Feature:
-Standard low profile HV high-speed digital metal gears servo、2BB

-Coreless motor

- Dead band: 2 u sec

-Operating Voltage:6-7.4Volts

-Interface: (like JR)

-Wire length: 30cm

Specifications:
-Power: 6V 7.4V
-Speed: 0.09sec/60° 0.07sec/60°
-Torque: 7.5kg.cm/104.34 oz.in 9.2 kg.cm/127.99 oz.in
-Weight: 53g(1.87oz)
-Size: 40.1*20.0*28.5 mm
-Application: 1/10 EP/GP Car
Posted by fitecrc | Aug 26, 2011 @ 02:18 AM | 6,409 Views
Features
-Standard digital Titanium gears servo、2BB

-Coreless motor、Aluminium middle hull

-Waterproof

-Operating Voltage: 4.8~7.4V

-Dead band width: 2usc

-Interface: (like JR)

-Wire length: 30cm

Specifications
Power 4.8V 6V
Speed 0.18sec/60° 0.15sec/60°
Torque 15.7kg.cm/ 218.4oz.in 18.5kg.cm/257.4 oz.in
Weight 56g (1.46oz)
Size 40.2*20.0*38.6mm
Application Air plane、Car、boat

Full Packaged

-Servo×1PCS

-Servo arm×1 bag

-Carton box

-GW: 90g
Posted by fitecrc | Aug 26, 2011 @ 02:14 AM | 6,357 Views
Features
-Standard digital Titanium gears servo、2BB
-Coreless motor、Aluminium middle hull
-Waterproof
-Operating Voltage: 4.8V~7.4V
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm

Product Details
Power:4.8V-6V
Speed:0.16sec/60° 0.14sec/60°
Torque:13.4kg.cm/186.4 oz.in 15.5kg.cm/215.3 oz.in
Weight:56g (1.46oz)
Size:40.2*20.0*38.6mm
Application:Air plane、Car、boat

Item Packing
-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW: 90g
Posted by fitecrc | Aug 26, 2011 @ 02:09 AM | 5,718 Views
Features
-Standard digital Titanium gears servo、2BB
-Coreless motor、Aluminium middle hull
-Waterproof
-Operating Voltage: 4.8V~7.4V
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm

Product Details
Power:4.8V-6V
Speed:0.14sec/60° 0.12sec/60°
Torque:10.5kg.cm/146.7 oz.in 12.5kg.cm/173.6 oz.in
Weight:56g (1.46oz)
Size:40.2*20.0*38.6mm
Application:Air plane、Car、boat

Item Packing
-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW: 90g
Posted by fitecrc | Aug 11, 2011 @ 02:58 AM | 3,804 Views
Features
-Standard Low profile digital metal gears servo、2BB
-Operating Voltage:4.8-6Volts
-Interface: (like JR)
-Wire length: 30cm

Product Details
Size: 40.1*20.0*28.5 mm
Weight: 51g(1.80oz)
Speed: 0.12sec/60°(4.8V)
0.09sec/60°(6V)
Torque: 7.5kg.cm/104.34 oz.in(4.8V)
9 kg.cm/125.21 oz.in( 6V )
Application: 1/10 EP/GP Car

Item Packing
-Servo×1PCS
-Servo arm×1 bag
Posted by fitecrc | Aug 11, 2011 @ 02:52 AM | 3,895 Views
Features
-Standard digital Titanium gears servo、2BB
-Coreless motor、Aluminium middle hull
-Waterproof
-Operating Voltage: 2-cell Li-Po power
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm

Product Details
Power:7.4V-8.4V
Speed:0.16sec/60° 0.14sec/60°
Torque:17.8kg.cm/247.2 oz.in 21.0kg.cm/291.7 oz.in
Weight:56g(1.41oz)
Size:40.2*20.0*38.6mm
Application:Air plane、Car、boat

Item Packing
-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW: 90g
Posted by fitecrc | Aug 11, 2011 @ 02:50 AM | 3,790 Views
Features
-Standard digital Titanium gears servo、2BB
-Coreless motor、Aluminium middle hull
-Waterproof
-Operating Voltage: 2-cell Li-Po power
-Dead band width: 2usc
-Interface: (like JR)
-Wire length: 30cm

Product Details
Power:7.4V 8.4V
Speed:0.14sec/60° 0.12sec/60°
Torque:14.8kg.cm/205.5 oz.in 16.9kg.cm/234.7 oz.in
Weight:56g(1.41oz)
Size:40.2*20.0*38.6mm
Application:Air plane、Car、boat

Item Packing
-Servo×1PCS
-Servo arm×1 bag
-Carton box
-GW: 90g