Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
nh4clo4's blog View Details
Posted by nh4clo4 | Aug 28, 2016 @ 04:52 PM | 1,096 Views
Here is a real cute ace 4-20 I maidened today. I got the kit on eBay earlier this year. I got it at a nice price. However once I opened it the person had built the kit with the original parts, and cut a partial new kit. The seller refunded a fair amount so I kept it.

After looking it over and pondering it I decided to build it. I had to make new stab and elevators, one fuse side, the cowl parts, and many more.

But I got it finished and maidened, flies great with a 25 size electric with a 3 cell lipo.

Also a pic of my inverza with dle 30
Posted by nh4clo4 | Jun 21, 2016 @ 09:22 PM | 2,140 Views
I have wanted to build one of these for a while, this winter I got a kit on rcgroups.
It's going to have a rimfire 46 with 4 cell lipo. I have a 3" turbo cool spinner, and adjusted the nose to accommodate.

Balsa USA kits build fast , the fuse Picts are after two evenings. Most of the first evening was planning the electric conversion,,

You can see that these are built with a lot of block balsa, and the shape to suite your vision,

Since I'm going electric, I cut lightening holes in the rear fuse. And I hollowed the large cowl block. It should be well below 5 pounds, hopeful around 4.

I cut the firewall so cooling air will pass the motor battery and I will have an exit out the back.

Hopefully tomorrow I can start the wings.

I got a good start on the wings, , it will be a few days before I will be back on it.

Al right, it is ready for final sanding and assembly, it is at 1.5 pounds with out covering and electronics. It should really scoot with the 46 rimfire


Maidened it tonight, flew great!!!

Way more than enough power, I think the 32 would be best, flew around 1/2 throttle the whole time...Continue Reading
Posted by nh4clo4 | Apr 22, 2016 @ 03:44 PM | 2,124 Views
Put four great flights on it today. First flight checked stall characteristics and trimmed, following flights put it through some paces.
Flies like a perfect uproar, great flying plane!!!

Added pictures of it next to my 40 size Uproar!
Posted by nh4clo4 | Feb 05, 2016 @ 12:21 PM | 2,285 Views
Hi,

After flying my 40 size on electric last fall, I was thinking on going bigger. I have the 60 kit, but it was too small for the 26 gx that I have and wanted to use.

So I designed a 70" span and went from there.

It has two piece wings with aluminum tube joined, plywood fuse
And a sig 14" canopy, looks like it will be around 11-12 pounds all up.

I'll post more pictures as I start covering it. Just need final sanding

I attached the color scheme, metallic teal and white with charcoal and purple.

Added some more pictures

Ed
Posted by nh4clo4 | Oct 17, 2015 @ 09:40 AM | 59,989 Views
Hi all,

Working on a vintage 4-60 kit. I started it about three weeks ago, and just about ready to cover. Have some more sanding and a few things to do.

Got it covered, probably wait til Spring to fire it up, break in the engine and maiden
It

Even have an original Captain Eddy for it!
Posted by nh4clo4 | Aug 10, 2015 @ 09:12 PM | 3,410 Views
A few weeks ago Tower had the Uproar kit on sale for 39.99. Couldn't pass it up.

Last week we had very windy conditions all week, and storming when not windy. So I looked around the parts bin, and covering stock, and realizing I had everything to put this together. So I started Monday night, got the rail surfaces built, and a good start on the fuse. Started the wing Tuesday night.. And by Thursday I was final sanding. I used digital metal gear servos out of my crashed splendor, the Esc out of the splendor. And a 40 size electric motor I had laying around. It will use a 4 cell lipo.

I covered it in metallic wine, white. And used kiwi and black sign vinyl to finish. Balanced perfectly. And weighs less than 4 pounds with flight battery. Of course it is still too windy to fly, but is supposed to calm down this week.
Ed
Posted by nh4clo4 | May 20, 2015 @ 08:36 PM | 4,049 Views
Here is a couple of pictures of the Stingray I built over winter. 20 cc Valley View gasser. Tower hobbies mg servos, and metallic red and white monokote with charcoal metallic pinstripes.
Posted by nh4clo4 | Jun 08, 2014 @ 04:16 PM | 4,258 Views
I built this over the winter, it has a speed 40 brushless motor,
4 cell loop, it has a vortech turbo cool spinner.

Covered in red a white monokote.

This had been a great flying plane and it really scoots.

I enlarged the elevator and rudder. It will knife edge really well.
Posted by nh4clo4 | Jun 30, 2013 @ 03:13 PM | 4,977 Views
Beautiful day in northern Minnesota!

Flew my big stik with 20 cc gas,

My Tiger 60 with 91 four stroke

And my Ace 4-40 with a Saito 56,

All went home in one piece😄
Posted by nh4clo4 | Jun 15, 2013 @ 04:26 PM | 5,490 Views
I finally maidened my Tiger 60 Last week, Built it over the winter, and finally got it in the air.

Features taildragger configuration with wheel pants, clipped wing, and flaps

Monokote covering. and a 91 fourstroke Magnum.
Posted by nh4clo4 | Dec 18, 2012 @ 08:31 PM | 6,257 Views
Well I got the fin sheeted, and started getting the fuse together, it is looking nice and straight!
Ed
Posted by nh4clo4 | Dec 17, 2012 @ 09:36 AM | 5,694 Views
After several successful flights, this one was damaged beyond repair from some failed hand launches.

But since it flew pretty good, I have decided to make a larger one. It will be powered by a 91 4 cycle proped for speed, have a landing trolley that releases at take off, then belly land. I though about retracts, but on a grass field, and wanting to keep as light as possible, the dolly will be the choice.

It will be around 55" long and the wingspan hasn't been decided yet, I think I will slightly extend it, and move it forward slightly to make up for all of the engine and nose weight.

All of the batteries and servos will be in the tail, and am hoping to light a D sized estes in flight.


I got the tail built up, and the formers cut, It will be built in a top half and a bottom half, and the fin will be glued to all of the formers.
I will update as progrress is made.
ED
Posted by nh4clo4 | Oct 31, 2012 @ 06:17 PM | 6,122 Views
Enjoyed a nice fall day with some classic planes.

My super sportster 20

And my ace 4-40!
Posted by nh4clo4 | Oct 21, 2012 @ 05:40 PM | 6,205 Views
Another picture
Posted by nh4clo4 | Oct 21, 2012 @ 05:07 PM | 6,387 Views
Attached a couple of pictures of my recently maidened Ace 4-40.
It is finished in yellow and white monokote, and has a Saito 56 for power.
Flies great!!
Posted by nh4clo4 | Feb 05, 2012 @ 06:45 PM | 7,032 Views
Attached are some pictures of the Dynaflite Super Decath I have been working on. I plan on doing it in Black, White and metallic Gold, Got the wing done and ready t tofinish up the fuse
It is going to have a G38 for power.
Thanks
ED
Posted by nh4clo4 | Nov 29, 2011 @ 08:40 AM | 7,628 Views
Attached are a few pictures of a plane I just finished, It was a Svenson Multi-Mini, Kaos/Kwik Fly Copy. it has a 20 HB and HS 81 servos. Not real happy with the color scheme, should have put more thought in it.
Ed
Posted by nh4clo4 | Nov 04, 2011 @ 11:22 AM | 7,158 Views
Below you can see uses for the squares.
ED
Posted by nh4clo4 | Oct 22, 2011 @ 09:18 PM | 7,695 Views
I started this 2 weeks ago, thought it would be a winter build, but it went together so fast, that I already maidened it before winter, Super Sportster 20 with a magnum 30 Four Stroke, Pure joy to fly, Red, Black and Metallic Gold trim.
Posted by nh4clo4 | Jun 16, 2011 @ 11:26 AM | 8,035 Views
Here is a scratch built Bell X-1 I worked on over the winter.
It is about ready to maiden, It has a HB 20 Engine and c-6 rocket motor ignited in flight. Hope to maiden in the next week