I am receiving an error message from my Thunder Power TP-610C,
Charger. It says " Voltage Error or Wrong Polarity
And the Manual is not helping ,,,its not doing what the manual tell me to do???
It looks like the battery has a low change
Battery recovery mode for Lipo and A123
When a battery pack is extremely over discharged, the charger will refuse to initiate. At this time, you can increase the voltage to normal
by using recovery mode. We strongly recommend this mode for experienced users onl y. When the LCD screen displays as below and the
charge begins, press the [INC] key to activate a recovery charge mode. It is timed for 1 minute.
Press [INC] key to recover low pack voltage. (Timed 1minute)
Li 20.000V 0.00A
Voltage Low Recover [+]
I can't get it to do this what m i doing wrong:confused:
Posted by fur_ball40 |
May 04, 2012 @ 09:23 PM | 1,967 Views
what did get myself into,
The plane looks nice in the video..But boy does it need some upgrades..
Does some one no were I can find some instruction,s on line,,,,,, to down load for a guild line,,
Went to the hobby shop last week pick up some things for it,, had to order a new radio the one I have is about 20 yrs old and the motors i have are too small for this size plane,,
I pick up a li-po 4-cell it a little to big for the tray but I think i can modify it a little,,
and the salemen talk me into a motor
it a e-flite power 32 brushless outrunner motor this motor is so nice all the power I need,,, BUT the motor mount is too big and it mounts from the front,,oh well back too the hobby shop