The new firmware of V2 version solved IPD adjustment and head track software problems.
SKYZONE 3D FPV goggles belong to the next generation FPV equipment.
Try 3D FPV while others are still flying in 2D!
The goggles are integrated with dual 5.8G receiving modules.By using with the newly designed
3D FPV camera and Transmitter,the player can enjoy perfect 3D wireless video with the 3D FPV
goggles,adding an extraordinary realistic feeling to FPV.
The working theory of the 3D FPV goggles is based on 4 groups(8 Channels) 5.8G wireless video.
Each group of video consists two different 5.8G channels that can be seperatedly displayed on
the 2 monitors of the goggles.In this way, the viewer can have a realistic feeling just like
seeing something with bare eyes.
-600mw x2 VTX
-3D/2D mode (Diversity in 2D mode)
-Built-in DVR with playback
-Built-in 32CH 5.8G receivers
-Built-in non-drift & self-calibrating head tracking (New 6 axis gyro, inertial and compass)
-Built in Dual 854X480(WVGA) Monitors
-Built-in external camera (640X480)
-AV in/AV out/Earphone socket (with volume control)
-Adjustable Interpupillary and Diopter for eyes
-Adjustable brightness and contrast
-Max four 3D FPV users at the same field
-1*Foxtech 3D FPV Goggle
-1*Goggle Carry Case
-4*5.8G 2dBi Antenna
-1*Futaba Data Cable
-1*JR Data Cable
-1*WFLY Data Cable
-1*2P TX Power Cable
-1*6P Camera Cable
-2*3P TX Remote Controller Cable
Seven type Multi-rotor supported
External LED module with build-in PMU
No compass need during stab mode
Manual controllable during RTH and Auto Landing, avoiding accidents
Compass disturbance alert
Low voltage alert
Flight Performance (can be effected by mechanical performance and payloads)
Hovering Accuracy (GPS Mode)
Max Tilt Angle: 30°
Max Horizontal Speed : 6M/s
Max Ascent Speed : 3.2M/s
Max Descent Speed : 2.5M/s
Electrical & Mechanical Input Voltage Range
MAIN Controller 4.5~5.5V
LED Module 7~28V
Posted by rctimer |
Dec 05, 2014 @ 08:24 PM | 4,165 Views
Lightweight, Strong and Stable
Highly Portable, Easy to Carry
New Power Distribution System
Removable Upper Center Board
Wide Range of Shooting Angles
Retractable Landing Gear
Compatible with Zenmuse Gimbals
Reduced Vibrations, Clearer Footage
1. 3-axis gimbal
2. High precision brushless servo control
3. Aluminum alloy body
4. Built-in IMU module
6. All of FC supported.
7. GoPro3 and GoPro3+ GoPro4 supported
8. AlexMos 32 bit technology.
9. Separate main board, you can put on anywhere.
Gopro3, GoPro3+ Black and Sliver GoPro4
GCU Input Power:
3-6S Lipo (12V-26V)3S~6S LiPo (12V~26V)
Assistant Software system Requirement: WinXP SP3/7/8
Mechanical & Electrical: GimbGimbal Operating Current:
Static current: 250mA(12V)
Dynamic current: 450mA(12A)
Gimbal Input Power: 3S-6S (12V-26V)
Operating Temperature: -10°C ~ 50°C
Gimbal Weight: 200g (camera excluded)
Gimbal Gimensions(With Damping Unit): 100mm X 90mm X 95mm
Controller Weight: 40g
Controller size: 60 mm X 37 mm X 15 mm
Posted by rctimer |
Oct 11, 2014 @ 10:16 AM | 3,975 Views
Condor come with AlexMos SimpleBGC 32-bit
- CNC all metal aluminum alloy
- 3-axis digital gyroscope
- Follow-up control mode
- Remote control mode
- Direction-locking mode
- High precision, 0.05 degree error
- Intelligent shock absorb system, smooth and steady.
- Site: 48*42*27mm
- Bearing weight: 5kg(camera+lens)
- Camera support: RED BMCC Canon 5D2, 5D3, 6D, 7D, 60D, Nikon D600, D90, D700, etc
- Camera frame size: <=180mm
- Precision: +/- 0.05 degree
- Power supply: about 2hours
- Rotation range: pitch(+/-360degree)/roll(+/-360degree)/rotation(+/-360degree)
- Function support: three working mode that could switch, stabilization system, anti-shaking system, power feedback system, manual control, wireless remote control
Posted by rctimer |
Sep 04, 2014 @ 09:52 AM | 27,041 Views
We have released our premiere FPV frame, the Argonaut. The first thing that stands out and sets this frame apart from any other in its class is it true 100% real multilayer carbon construction, great features, design, durability, great looks and the motor arms are a nice beefy 5mm thick yet won’t break the bank.
The Argonaut is a 370mm class Hex frame design that is optimized for FPV flight with a forward platform for HD cams & FPV gear and a rear platform for ample battery and CG adjustment. One of the key features is Integrated PCB & ESC and 5vdc 5A UBEC,
There are lots of FPV Mini Hex frames on the market and each have their unique features, the Argonaut incorporates them all in a top level product that is unmatched in construction and strength.
True Multi-layer carbon construction
6 integrated ESC's running BL-Heli Firmware
5 individual 5vdc regulators for Accessories
Integrated 5vdc 5A UBEC for Flight Controller
Compatible with Futaba FASST receivers: 6EX, 7C, TM7, TM8, T8FG, T10C, TM-10, T10CG, T12A, T12FG, TM-14, T14MZ, 14SG, etc.
The ElgaeRx 8ch is only 9.7g in weight and 30x45x10mm in size. Great for small planes, helis, parkflyers or even medium sized sport planes. These receivers can be used in pairs to create a satellite system with 14 channels.
Light weight 9.7g
Compatible with FASST aircraft radio and module systems
Compact design 30x45x10mm
Twin antenna for diversity and long range.
Input voltage: 3.5~8.4V
Specified Range: 1.5km+
Up to 14 channels in satellite mode (requires 2 EGR8-S receivers)
35% Enhanced video quality, more details at low light
With AV out in the USB, great RTF camera for FPV
With high definition 1.5” back screen for easy operation and replay
Support 2*32G TF cards
Mighty 1080P 30fps video shooting and high speed mode 720P 60fps
Time lapse video and auto shooting function
800mAh battery support more than 1.5 hours’ video recording
30meters waterproof with the Dive Case
Accessories compatible with GoPro, RTF with RCTimer Spider and DJI Phantom
Great work with brushless gimbal, ensure professional stable video even you are beginner
Small and yet smart size
Sensor: 5.0 M 1/2.5” CMOS Sensor
Lens: f/2.8, 6-layers glass lens
FOV: 170° @ 720P; 127° @ 1080P
Recording modes: 1080P 30FPS , 720 60FPS
Photo modes: 8M / 5M / 3M Optional
Motion Detection: Yes
Time Lapse modes: 1 FPS 2FPS 6FPM 1FPM
Screen: 1.5” HD Screen
Storage: 2 x 32G Micro SD
Interface: USB2.0 HDMI
Battery: 800mAh Li-Po Battery
Working Time: 2 hours
Charging Time: 2.5 hours
Waterproof: 30 meters / 90 feet (w/ dive case)
Size: 49mm x 42mmx 34mm (H x W x D)
Weight: 68 grams
Compatible system: Window 7, Vista, Mac OS X 10.4.11 and above
Output: HDMI , Real Time AV out
Posted by rctimer |
Jan 05, 2014 @ 06:07 AM | 37,580 Views
IMP 3Axis Brushless Gimbal W/ AlexMos Controller For All Multi-Rotor
This is the smallest 3 Axis brushless gimbal, total weight just 240g (included 3 motors and controller), it is very easy to work all of the Multi-Rotors.
the data of controller is only the standard data, maybe not the perfect one, customers can turn it as per the camera what used.
Posted by rctimer |
Nov 10, 2013 @ 09:57 AM | 7,388 Views
The 2804 motor comes with flush mounting so any DIY to PRO projects are simple and straight forward, it also comes with the standard female connector pre-installed, So wiring is as simple as plugging it in. It’s a perfect match to the Brushless Gimbal Stabilization Board and IMU.
The 2804 is the perfect size for cameras around 100-300 grams (GoPro style).
Resistance: 10.0 omh
Bottom holes center to center: 16mm and 19mm
Top holes center to center: 12mm
1. High efficiency (>90%), the additional heat-sink is unnecessary in most applications.
2. New design with lighter weight but higher torque output.
3. Higher power than the competition, faster acceleration and higher top speed.
4. Dual oversized precision bearings.
5. Top quality materials:
1). Aluminium shell (case)
2). Powerful Sintered NdFeB Magnet
3). Copper wires of high temperature endurance
4). High quality bearings
6. Anti-broken rotor with special workmanship.
7. Dustproof design.
8. CE/ROHS Certificate.
Max RPM: 50000
Motor Shaft Size: 3.17mm
Max. Efficient Current: 56A
Max. Power Output: 350W
Dimensions: D35.8x L50mm
Battery (Li-Po): 1~2S