Shop our Airplanes Products Drone Products Sales
Kambalunga's blog View Details
Posted by Kambalunga | Aug 08, 2016 @ 02:08 AM | 1,168 Views
Airshow Gommersheim 2016.

History Fursty Skyblazers 22. squadron of the 36. Fighter Wing.

Horizon Hobby F-86 Skyblazers
F 86 So (7 min 58 sec)

Heinkel He 162 Salamander 380km/h max.
Salamander (5 min 54 sec)
...Continue Reading
Posted by Kambalunga | Feb 24, 2016 @ 10:17 AM | 2,693 Views
KK 2.1.5 and KK 2.1.5 MultiWII with GPS, baro and compass. GPS is displayed on the DX9 and used by MultiWII for RTH and PH.
Some acrobatic with the copter and Stevis KK2.1 V1.19S1 firmware.
Kopter (8 min 2 sec)

Posted by Kambalunga | Jul 11, 2015 @ 05:38 PM | 3,230 Views
17. October 2015 Modellsportverein e.V. Hofheim Autumn Fair 2014 in Lampertheim Germany. Opening for the public 08:00-14:...Continue Reading
Posted by Kambalunga | Dec 29, 2014 @ 05:16 AM | 4,424 Views
MSV-Hofheim Spring Fair 2015
28.Februar.2015 MSV-Hofheim Spring Fair 2015 in Lampertheim Germany, (Hans-Pfeifer-Halle Im Weidweg 4)....Continue Reading
Posted by Kambalunga | Jan 04, 2014 @ 05:40 PM | 6,333 Views
Made some tests with my DIY Spektrum Vario. The Vario tone code based on DIY simple and inexpensive Arduino-based sailplane variometer.
As multi sensor use it the Altitude sensor menue and for the vario,temperature and high res altitude the g-sensor menue.
Logfile visualised with the Robo Software Spektrum Telemetry Viewer.
DIY Spektrum telemetry sensors Spektrum Telemetry reverse engineered, make DIY sensors ! The accuracy of the capacity sensors is now within 2% variance. Tweak now a little bit the lowpass filter. Use now the Powerbox menue and the current menue. Because the current menue has the alarm configurable in the TX, use I the current menue as capacity menue too. Vario is now as vario integrated. Deliver the altitude and the climb rate. The capacity sensor use now the flight pack capacity menue. Accuracy now within +-1%. SPort to TM1000 decorder.

DSCF1445 (2 min 9 sec)
...Continue Reading
Posted by Kambalunga | Nov 11, 2011 @ 04:46 AM | 10,336 Views
My new project
A Mirage 2000 C based on the FMT Mirage 2000 from M.J.Chyla.
The maiden fligth was 05.19.2012 but the Change Sun EDF 120mm 12blade faild after 20sec in air. I return the Mirage as glider to the landing strip. The good thing the fly and need no trimming. The damaged cover and the HET 700-98-670 is now repaired. The new EDF is a Dynamax with a HET 700-98-670, EJF CNC adapter and EJF collet. After some runs on the test stand on WOT made I the maiden flight with the Dynamax on 08.27.2012. 11S 30C max 95A. Change now to 12S/40C at start 103A....Continue Reading