THE KING BEFORE CRASHED

king quad crash (3 min 11 sec)

...Continue Reading

Scale Hughes 500 with Trex 450 pro internals With scale lights and rain storm. (6 min 32 sec)

Scale Hughes 500 with Trex 450 pro internals flying a dangerous rescue missing in rain storm. With scale lights and rain storm.

007 bd5 with titles timelapse build (12 min 11 sec)

I was planning on painting like a coors silver bullet then I started adding LED's.

Hmmmm....

Not finished yet but I'm gona maiden it then finish.

Build video coming soon.

Build / plans:

http://www.rcgroups.com/forums/showthread.php?t=1141686

I got a kit from here and it was great:

http://www.balsabuddies.com/cutouts/bbshop.htm

It's sanded and RTF:...Continue Reading

turnigy monster beatle

turnigy monster beatle (4 min 53 sec)

Monster dtF22 build (4 min 19 sec)

...Continue Reading

http://www.rcgroups.com/forums/showt...8#post17081118

$90

the heptavian: it was built to replace my 75% heptad. purpose of the plane is for fpv av and uav testing. id like to consider it a prototype and a very moduler design. its my first design using minimal plans. initial plan idea was an easy build box fuse made using dollar tree foam. length of the main section is 30". the wing is also of my design and is a kfm3 60".

inspired by powers heptad http://www.rcgroups.com/forums/showt...ghlight=heptad , ezstar gliders and springers numerous osx builds http://www.rcgroups.com/forums/showt...1391606&page=3

it uses 2 servos rel. also features a moduler nose that can easily be swapped out for a larger battery or video type. not finished but past first phases of flight testing and crashes.

built over about the past 3 weeks. worked my fingers til raw but building bug keeps on biting.

heptavian proto intro (4 min 48 sec)

...Continue Reading

dog chasing an rc motorcycle part 1 (0 min 58 sec)

...Continue Reading

attached is a file from my roteltek gps tracker i got for $40 on ebay. i had a tough time with it to start but was able to actually communicate with royeltek in TW to get it updated and its working well now. below is a sample file and a screenshot from a how high can you go that AA did. The attached file is from a seperate run, not the one shown in the screenshot.

Turnigy 2836 Brushless EDF Motor 3200kv
http://www.hobbyking.com/hobbyking/s...idProduct=8138

Dimension: 28mm x 38mm, 53mm(with shaft)
Weight: 72g (kv3200) (not including connectors)
Diameter of shaft:�F3.17mm
Length of front shaft:�F14mm
Lamination thickness: .2mm
Magnet type: 45SH

Max performance;
Voltage: 3-5S
Prop: 70mm EDF (3~5 Blade)
Power: 650W
For 70 size EDF

Kv (rpm/v) 3200
Weight (g) 72
Max Current (A) 0
Resistance (mh) 0
Max Voltage (V) 18
Power(W) 650
Shaft A (mm) -
Length B (mm) 37
Diameter C (mm) 28
Can Length D (mm) 22
Total Length E (mm) 55


HXT 2835 (380S) 3900kv Brushless Inrunner
http://www.hobbyking.com/hobbyking/s...idProduct=4200

Motor Size: 2835 (380S)
Speed: 3900kv
ESC Required: 40A
Voltage Range: 6~12v
No Load Curr: 2.0A
Max Load: 40A

Diameter: 28.2mm
Length: 37mm
Front Mounting Hole Distance: 15mm
Front Mount Thread Size: M3
Shaft Diameter: 3.2mm
Shaft Length: 12mm
Weight: 102grams

Kv (rpm/v) 3900
Weight (g) 102
Max Current (A) 40
Resistance (mh) 0
Max Voltage (V) 12
Power(W) 0
Shaft A (mm) -
Length B (mm) 37
Diameter C (mm) 28
Can Length D (mm) 36
Total Length E (mm) 49

when you have this kind of control, come back here and let us know. until then, um yeah OK:

RC Jet - Full 3D LAVI Fighter, Turbine Powered. Crazy! (5 min 28 sec)

RC Jet takeoff and a faceplant (3 min 11 sec)

Its finished. went through a rough maiden period with a couple of crashes. Its been a stable flyer for the past few weeks so I finished it. Bit of a rushjob on the paint.

projector 16x9
14.6%
29" ws
42" l

Its been a long time since I bought an RTF plane, but here it is:

polaris with a nose job and airbrushed

on board video showing rx loosing reception at what I would guestimate at over 500 - 600 ' away. could be much more, you be the judge.

see 2:50 where the rx is lost. The esc starts chiming about 5 seconds later indcating that there is no signal. luckly signal was regained and I was able to recover. i didn't realize this happened until i reviewed the video. very interested in hearing your thoughts.

heptad flying (rc video plane) SUNP0017.AVI (7 min 44 sec)

my heptad with a KFM wing:

Heptad w F22 on Mt. Burdell 3rd person in HD (9 min 39 sec)

...Continue Reading

favorite rc videos

New York City (3 min 2 sec)

...Continue Reading