HobbyKing.com New Products Flash Sale
ozzi supercub's blog
Archive for February, 2009
Posted by ozzi supercub | Feb 05, 2009 @ 10:13 PM | 4,272 Views
Hi everyone.
I have been experimenting with some FPV gear and am attempting to install it into my trusty Supercub. I thought it would be straight forward but little did I know. I should have listened to Ommadawn. Firstly, the little connector that goes onto the Tx snapped off the black wire. Try and find one of those here in Adelaide
I just soldered the wires directly to the Tx and it works fine now.

Now that I have everything installed I am having trouble getting rid of servo chatter. They are GWS servos. Any servos out there that are known not to chatter. Do digital ones make a difference?
My poor Supercub has been hacked to within an inch of its life as I keep moving components around to try and alleviate the chatter problem. The best I have managed so far is the set-up you see in the photos.I can plug everything in and no chatter but touch a wire or even just moving around the plane can cause bits of chatter. The only thing left is to perhaps shorten the mess that is the wires from Tx/camera/mic.