Airfield Zero full build review by Nitroplanes.com
Off topic static models
I got very lucky and made Fine Scale Modeler with this model
http://cs.finescale.com/FSMCS/media/p/1505009.aspx
and Scale Auto with this one http://cs.scaleautomag.com/SCACS/the...?PostID=983561
http://cs.finescale.com/FSMCS/media/p/1505009.aspx
and Scale Auto with this one http://cs.scaleautomag.com/SCACS/the...?PostID=983561
Nitroplanes Airfield Zero 1400 MM receiver info
| Airfield 1400 MM Zero receiver info (0 min 54 sec) |
A Nitroplanes.com Sponsor
Off topic model
A 1/24 scale garage that I am scratch building.
Very happy to say that this model just made Scale Auto Magazine : )...Continue Reading
Very happy to say that this model just made Scale Auto Magazine : )...Continue Reading
dual rate explanation
| Dual rates (0 min 43 sec) |
a linkage tip for Novices
Pitts EP servo location
If you have the Pitts Bipe here is the servo location.
| Pitts servo location from Nitroplanes (0 min 45 sec) |
Painting the F-35 from Nitroplanes.com
| RC Plane paint job-part 1 (0 min 37 sec) |
Painting foam aircraft
Painting the F-35 from Nitroplanes.com
| RC Plane paint job-part 2 (1 min 55 sec) |
First Heli hover
This is a video of a first hover attempt of an Esky Belt CP V2 I got from Xheli.com
| hover.avi (1 min 0 sec) |
I can help
Hey everyone, I have been into RC for 25 years and flying planes for 12 years. Recently I began heli training.
Having worked in a Hobbytown USA as manager for 6 years here in Cincy I am a great troubleshooter.
I currently do instructional build videos for Nitroplanes.com and have experience at bulding quite a few aircraft, so If I can help in any way at all, please let me know.
Helping people is what I do and enjoy, nothing is better unless it is watching a Novice fly a plane for the first time.
Having worked in a Hobbytown USA as manager for 6 years here in Cincy I am a great troubleshooter.
I currently do instructional build videos for Nitroplanes.com and have experience at bulding quite a few aircraft, so If I can help in any way at all, please let me know.
Helping people is what I do and enjoy, nothing is better unless it is watching a Novice fly a plane for the first time.
For novices only
This is only if you have never used an airplane radio before.
...Continue Reading
| CIMG3849.AVI (2 min 13 sec) |
...Continue Reading
Test flight of the Accipiter badius
do not fly with the motor mounting screw hitting the spinner like I did, note the sound coming from the motor. This was a very easy fix.
| test flight of the Accipiter Badius (1 min 10 sec) |
The EF2000 From Nitroplanes
The EF2000 From Nitroplanes
Part One
The EF2000 or Typhoon Fighter comes 90% RTF with a 4 channel radio with built in elevon mixing and is incredibly easy to assemble....Continue Reading
Part One
The EF2000 or Typhoon Fighter comes 90% RTF with a 4 channel radio with built in elevon mixing and is incredibly easy to assemble....Continue Reading
Typhoon Paint Idea
Typhoon From Nitroplanes Paint Idea
Off topic memorial day models
MEMORIAL DAY MODELS FOR ALL VETERANS
A Personal Salute To You
LAV 25 TUA USMC Circa 1991 Saudi Arabia
A Personal Salute To You
LAV 25 TUA USMC Circa 1991 Saudi Arabia
The Me / BF 109 Messerschmidt 1400mm from Nitroplanes
The Airfield Me / BF 109 Messerschmidt 1400mm from Nitroplanes
I can not believe that this plane is as easy to build as a 800 MM ME/-109.
Superb fit on every part and everything pre-done.
.....Continue Reading
I can not believe that this plane is as easy to build as a 800 MM ME/-109.
Superb fit on every part and everything pre-done.
.....Continue Reading
The Airfield P-40 800 MM from Nitroplanes
Building the The Airfield P-40 800 MM from...Continue Reading
Airfield 800 MM Warbirds from Nitroplanes
These six Airfield 800 MM Warbirds from Nitroplanes are still awaiting for their maiden flights due to the fact we have had 12 inches of rain this month alone so far and more to come.
They all went together easily with no issues and I expected them to fly well. These planes can be built in only a few minutes. There is very little left to do for the assembler.
They all went together easily with no issues and I expected them to fly well. These planes can be built in only a few minutes. There is very little left to do for the assembler.
Building the CMP Katana EP from Nitroplanes- Final part
Building the CMP Katana from Nitroplanes - part 5- Final
I used a radio that offered dual rates to give this plane a perfect final touch. In fact all photos of the surface controls in action are on high rates and need taming down some before flying.
Assembly was easy, all parts fit perfectly and I love the fact the main wing is not glued together allowing for easy removal for transport.
Even the linkages were pre -done with the servo horns already on them making linkage hook up super easy.
I remember when an ARF took a week to do but lately new designing is allowing for quicker assembly with the same beautiful end results.
The motor, ESC, and all servos were already installed ! Wow !
Pre -done wheel pants put the icing on the cake for me, sometimes that can be really time consuming but not with this plane. I only had to insert two 4 x 20 bolts into the fuse and they were done !
Plane powered by 5000 mah 25 c 14.5 volt Blue...Continue Reading
I used a radio that offered dual rates to give this plane a perfect final touch. In fact all photos of the surface controls in action are on high rates and need taming down some before flying.
Assembly was easy, all parts fit perfectly and I love the fact the main wing is not glued together allowing for easy removal for transport.
Even the linkages were pre -done with the servo horns already on them making linkage hook up super easy.
I remember when an ARF took a week to do but lately new designing is allowing for quicker assembly with the same beautiful end results.
The motor, ESC, and all servos were already installed ! Wow !
Pre -done wheel pants put the icing on the cake for me, sometimes that can be really time consuming but not with this plane. I only had to insert two 4 x 20 bolts into the fuse and they were done !
Plane powered by 5000 mah 25 c 14.5 volt Blue...Continue Reading
