Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
gallfer's blog View Details
Posted by gallfer | Apr 16, 2016 @ 09:08 PM | 1,538 Views
This poor beast has been worked on for at least the past 3 years. It's been to TX, IN and finally CA. Danny Miller had it for about a year until he passed. Excellent craftsman! Radio South had it next and made it work properly. Finally, Calaire in Burbank made it look great and tightened up the stick.
This one is Spektrum 2.4 with a Microstar encoder.
Posted by gallfer | Mar 28, 2016 @ 07:03 PM | 2,099 Views
Threw this together this past winter. It's a 1968 Guillows Arrow I found on ebay. Built one rubber powered when I was a bit younger. This version is powered by the guts of a Vapor - motor/Rx-servo. Needed a 500mah 1S lipo to balance it. Modded the vertical fin to add a rudder and added a piece of 1/32" sheet to the stab. for elevator. So I have rud/ele/tht. Maiden coming, on a VERY calm day
Posted by gallfer | Mar 10, 2013 @ 03:03 PM | 4,039 Views
Just finished, waiting on graphics. E Flite retracts, 4 HS-85MG servos. Hacker A30-10XL, 10 x 8.5 prop, Tru Turn turbo flow spinner. First test showed 630 watts at 50 amps. Weighs in at 4.5 lbs with 3300 4S lipo.
Posted by gallfer | Aug 02, 2012 @ 06:39 PM | 4,346 Views
Picked this one up for $70 in very good shape. Had a Saito something in it and I put a Axi 4130/16. Should have enough power (1100 watts)
Posted by gallfer | Jul 18, 2012 @ 12:07 PM | 4,484 Views
Was happy to take part in this worthy endeavour. Worked together with SnowDog74.
Posted by gallfer | Feb 11, 2012 @ 01:17 PM | 4,870 Views
Just about done. That light film covering is a b*tch for a one-handed bandit! Very light airframe. TP90 servos, A20-20L motor, No Name 25A ESC and will use a 1000-1300mah lipo.
Posted by gallfer | Oct 13, 2011 @ 08:24 PM | 5,459 Views
Finally flown it a few times. Gets better with every flight! I was intimidated by it's size but it flys SOOOO smooth. It makes me look like I know what I'm doing.
Posted by gallfer | Aug 03, 2011 @ 08:32 PM | 5,678 Views
Vintage about 2004. Found it here while looking for a Fliton Edge. Got the 1 piece composite LG from Esprit Model. The original Flitons ain't too good. Made them fit with very little mod. Need decent gear on the grass field at the club site.

Motor, servos, lipo and ESC from Heads Up RC. You gotta try them!

If any of you use stainless hardware, please check my site:

Helps me buy more toys!!!!
Posted by gallfer | Aug 03, 2011 @ 08:24 PM | 5,655 Views
I swear it was the radio! But Tweety Bird is gone. Still can't throw away the pieces.
Posted by gallfer | Jul 12, 2011 @ 08:00 PM | 6,012 Views
I electrified a Fliton Infinity 90. Won't fit on the floor for a good pic.

Ziroli Turbinator. REAL pain to build, but flys very nice. Only pulling 600W so it's no screamer. Even with E Flite retracts.

Hanger shot. Need more room or less toys!
Posted by gallfer | Mar 14, 2011 @ 08:45 PM | 7,781 Views
OK, this is my new dream transmitter. Another incredible Danny Miller build. Unfortunately the wonderful old gent it was built for will not be able to use it. Very sad story and I feel like a thief in the night being the new owner. I paid a great deal for it and will give it a very good home. Thanks Elmer!!!
Posted by gallfer | Mar 14, 2011 @ 08:40 PM | 8,456 Views
Found this on RCU and had to have more of the stuff from the 70's. Used more great stuff from HeadsUpRC to make it go. Should be a rocket!
Posted by gallfer | Nov 26, 2010 @ 12:22 PM | 7,518 Views
Finally got it finished. The bad pic is the glow version I built in 1977.
Posted by gallfer | Apr 19, 2010 @ 07:41 PM | 7,183 Views
Ready for maiden! Now if the dam east winds off Lake Michigan will quit so I don't have to T.O. downwind.
Posted by gallfer | Feb 10, 2010 @ 09:00 AM | 7,454 Views
Hope to have this beast flying this spring. Turnigy SK6374 motor and 100HV Sentilon ESC. Changed the ESC to a CC85HV, Sentilon didn't like 12S.
Posted by gallfer | Dec 30, 2009 @ 09:46 PM | 7,589 Views
Kinda my dream transmitter. Original transmitter was new and living in Texas when I found it. Danny Miller, also from Texas, made it into a Micro Star 2K, 2.4 ghz with switches placed to suit my slight disability. Danny is a top shelf craftsman and just goofy enough to be a joy to work with.
Posted by gallfer | Nov 17, 2009 @ 08:06 AM | 7,927 Views
Bought this one framed up recently. Used Coverlite to finish it. HS-55s on ailerons, HS65HB for rudder & elevator. 2830-09 motor from HeadsUpRC with 18amp TB ESC. Would make a great trainer on low rates, but will turn itself inside out on high rates. Works well flown from a soccer field but needs a clear glide path if you're a little fast on approach. Just doesn't want to quit flying. Weighs in at about 1lb.
Posted by gallfer | Sep 16, 2009 @ 09:22 AM | 8,021 Views
Guess I like the guys (Bill & Craig) at Aerocraft. This Small Stick went together fast since it was a laser cut kit. Flys very nice and fits the middle school soccer field perfectly.
Posted by gallfer | Sep 09, 2009 @ 09:20 PM | 7,873 Views
Built from an old kit I found on eBay. Aerocraft is re-releasing a laser cut version later this year. E Flite Power 10, Master Airscrew 10 x 7 3 blade prop, 375 watts at WOT, .10 size mech. retracts, Tru-Turn spinner. No trimming needed on maiden, flys REALLY smooth.
Posted by gallfer | Sep 09, 2009 @ 09:05 PM | 8,398 Views
Old Kraft Single Stick updated for my use