Espritmodel.com Telemetry Radio
Vethraxx's blog
Archive for February, 2010
Posted by Vethraxx | Feb 17, 2010 @ 05:19 PM | 3,033 Views
I just came across this site and what hit me is that it's on a russian server. I was searching for plans of a p-59 Airacomet and I found IT! Comet Model Aircraft apparently made one in 1947. It was in .pdf format and I ran down to Office Depot with a thumb drive and they printed it out. Their printer can only print up to 36" wide, so I could only get a 180% enlargement. That puts the wing span at about 47"

Here is the link to the plans: http://tinyurl.com/yz23f4q

and photos of my enlargement. It's my first enlargement of an old plan. I am happy.
Posted by Vethraxx | Feb 17, 2010 @ 04:56 PM | 3,051 Views
This is the "in progress" build of my Herr Starlite. I chose Coverlite over the tissue that came in the box (I don't like the color). I put Turnigy B12-30 3850kv Inrunner instead of the mentioned brushed motor. I added a rear wheel. (More photos soon). I have lots of small 2s lips to stick in it. I put a E-Flite 1.5mm prop adapter and also made the whole area infront of the wing, a access door in case the motor needs to be removed. It's held in with magnets.

I probably won't get in on the 4oz they said you should, but I am sure it will fly.

UPDATE : It's complete. New photos. it it's final weight is 8oz. OOps.
Posted by Vethraxx | Feb 01, 2010 @ 01:15 PM | 3,367 Views
Here is my completed Rally XP by Herr. All laser cut. No issues building it. It's my first real experience with covering a plane, I think I did moderately well. I will have a folding prop added shortly. Anxious to try it. Balanced nicely.

I have read some threads about this plane, and know of the purported rudder, can't turn issue. I will see what it does, and make changes if needed.

Update: I added the folding prop as soon as it came in the mail. Goes more with the red and black. Need colored rubber bands!